Welcome to Vista Banter. You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to ask questions and reply to others posts, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact support. |
|
Hardware and Windows Vista Hardware issues in relation to Windows Vista. (microsoft.public.windows.vista.hardware_devices) |
|
LinkBack | Thread Tools | Display Modes |
|
|||
Resolution Problems
I am unsure what has caused my problem, so I was hoping someone may be able
to shed some light on it for me. I am running, Vista Business 32bit, Intel Duo 6750, Gigabyte P35-DS3P MB, XFX 8800GT 512mb (Factory OC), 2GB Kingston HyperX DDR2, Viewsonic VX2235wm Monitor. (That should be enough info) Everything had been working fine, but without any changes to hardware, software or drivers I now have resolution problems. Firstly, when I boot my pc up it all goes well until just after the “Windows Vista” logo at the bottom of the screen comes up (during boot) the monitor goes into standby mode. Now the only way I have found to get my monitor out of this is to unplug the DVI cable from the back of my tower and plug in back in. The monitor then runs as normal – SO THATS ONE PROBLEM. Secondly, when the above problem first happened (and this is still happening) my resolution is stuffed. My monitor can go up to 1680x1050 and my Video Card can easily handle this. (Which it had been doing). But now I can only achieve 1024 x 768. So I really would like to know if anyone can put there finger on what the problem may be. Oh yeah, I have uninstalled, updated, reinstalled drivers. Currenly using the 169.25 Nvidia Driver. Thank you in advance. -- E6750, P35-DS3P, XFX8800GT512 OC, 2GB Kingston HyperX, Viewsonic 2235wm, CoolerMaster Mystique 632, CoolerMaster 600W, Zalman Cooling. |
|
|||
Resolution Problems
Hi
I have similar problem on Vista Business 32bit, Intel Duo 6750, MSI P35Neo3, MSI 8800GT 512mb (Factory OC), 2GB Goodram 800MHz. When I try to install driver for VGA, the instalation stop in the middle of process. The after some time it went to the end. But after starting Windows a can see only status bar and then the PC freeze for a while and after around 30sec does to the blue screen. Could somebody help me with this problem Thanks "Rusty1971" wrote: I am unsure what has caused my problem, so I was hoping someone may be able to shed some light on it for me. I am running, Vista Business 32bit, Intel Duo 6750, Gigabyte P35-DS3P MB, XFX 8800GT 512mb (Factory OC), 2GB Kingston HyperX DDR2, Viewsonic VX2235wm Monitor. (That should be enough info) Everything had been working fine, but without any changes to hardware, software or drivers I now have resolution problems. Firstly, when I boot my pc up it all goes well until just after the “Windows Vista” logo at the bottom of the screen comes up (during boot) the monitor goes into standby mode. Now the only way I have found to get my monitor out of this is to unplug the DVI cable from the back of my tower and plug in back in. The monitor then runs as normal – SO THATS ONE PROBLEM. Secondly, when the above problem first happened (and this is still happening) my resolution is stuffed. My monitor can go up to 1680x1050 and my Video Card can easily handle this. (Which it had been doing). But now I can only achieve 1024 x 768. So I really would like to know if anyone can put there finger on what the problem may be. Oh yeah, I have uninstalled, updated, reinstalled drivers. Currenly using the 169.25 Nvidia Driver. Thank you in advance. -- E6750, P35-DS3P, XFX8800GT512 OC, 2GB Kingston HyperX, Viewsonic 2235wm, CoolerMaster Mystique 632, CoolerMaster 600W, Zalman Cooling. |
|
|||
Resolution Problems
Have you contacted MSI?
"Peter Tolarovic" Peter Tolarovic @discussions.microsoft.com wrote in message ... Hi I have similar problem on Vista Business 32bit, Intel Duo 6750, MSI P35Neo3, MSI 8800GT 512mb (Factory OC), 2GB Goodram 800MHz. When I try to install driver for VGA, the instalation stop in the middle of process. The after some time it went to the end. But after starting Windows a can see only status bar and then the PC freeze for a while and after around 30sec does to the blue screen. Could somebody help me with this problem Thanks "Rusty1971" wrote: I am unsure what has caused my problem, so I was hoping someone may be able to shed some light on it for me. I am running, Vista Business 32bit, Intel Duo 6750, Gigabyte P35-DS3P MB, XFX 8800GT 512mb (Factory OC), 2GB Kingston HyperX DDR2, Viewsonic VX2235wm Monitor. (That should be enough info) Everything had been working fine, but without any changes to hardware, software or drivers I now have resolution problems. Firstly, when I boot my pc up it all goes well until just after the “Windows Vista” logo at the bottom of the screen comes up (during boot) the monitor goes into standby mode. Now the only way I have found to get my monitor out of this is to unplug the DVI cable from the back of my tower and plug in back in. The monitor then runs as normal – SO THATS ONE PROBLEM. Secondly, when the above problem first happened (and this is still happening) my resolution is stuffed. My monitor can go up to 1680x1050 and my Video Card can easily handle this. (Which it had been doing). But now I can only achieve 1024 x 768. So I really would like to know if anyone can put there finger on what the problem may be. Oh yeah, I have uninstalled, updated, reinstalled drivers. Currenly using the 169.25 Nvidia Driver. Thank you in advance. -- E6750, P35-DS3P, XFX8800GT512 OC, 2GB Kingston HyperX, Viewsonic 2235wm, CoolerMaster Mystique 632, CoolerMaster 600W, Zalman Cooling. |
|
|||
Resolution Problems
Problem somved with new MB Bios
"Colin Barnhorst" wrote: Have you contacted MSI? "Peter Tolarovic" Peter Tolarovic @discussions.microsoft.com wrote in message ... Hi I have similar problem on Vista Business 32bit, Intel Duo 6750, MSI P35Neo3, MSI 8800GT 512mb (Factory OC), 2GB Goodram 800MHz. When I try to install driver for VGA, the instalation stop in the middle of process. The after some time it went to the end. But after starting Windows a can see only status bar and then the PC freeze for a while and after around 30sec does to the blue screen. Could somebody help me with this problem Thanks "Rusty1971" wrote: I am unsure what has caused my problem, so I was hoping someone may be able to shed some light on it for me. I am running, Vista Business 32bit, Intel Duo 6750, Gigabyte P35-DS3P MB, XFX 8800GT 512mb (Factory OC), 2GB Kingston HyperX DDR2, Viewsonic VX2235wm Monitor. (That should be enough info) Everything had been working fine, but without any changes to hardware, software or drivers I now have resolution problems. Firstly, when I boot my pc up it all goes well until just after the “Windows Vista” logo at the bottom of the screen comes up (during boot) the monitor goes into standby mode. Now the only way I have found to get my monitor out of this is to unplug the DVI cable from the back of my tower and plug in back in. The monitor then runs as normal – SO THATS ONE PROBLEM. Secondly, when the above problem first happened (and this is still happening) my resolution is stuffed. My monitor can go up to 1680x1050 and my Video Card can easily handle this. (Which it had been doing). But now I can only achieve 1024 x 768. So I really would like to know if anyone can put there finger on what the problem may be. Oh yeah, I have uninstalled, updated, reinstalled drivers. Currenly using the 169.25 Nvidia Driver. Thank you in advance. -- E6750, P35-DS3P, XFX8800GT512 OC, 2GB Kingston HyperX, Viewsonic 2235wm, CoolerMaster Mystique 632, CoolerMaster 600W, Zalman Cooling. |