In XP, I was able to connect to my mac by mapping network drive. I get an
error in Vista. I followed the instructions posted on the forum
HKEY_LOCAL_MACHINE\SYSTEM\cURRENTcONTROLsET\cONTRO L\Lsa. I changed the
LmCompatibilityLevel to 1. I rebooted. Still can't connect. What am I doing
wrong?
--
Angie

klaberhead wrote:

In XP, I was able to connect to my mac by mapping network drive. I get an
error in Vista. I followed the instructions posted on the forum
HKEY_LOCAL_MACHINE\SYSTEM\cURRENTcONTROLsET\cONTRO L\Lsa. I changed the
LmCompatibilityLevel to 1. I rebooted. Still can't connect. What am I
doing wrong?

You've posted this twice before using different names. I answered you twice
before asking you for more details. This is the third time you've posted
the same thing and still you aren't providing any details so you can get
help!

Remember that we can't see your computers. We don't know what happens - or
doesn't happen - when you try. We don't even know what version of OS X (and
I'm assuming it isn't OS 9 but that could be wrong) you're using.

Asking the same question multiple times under different names without
providing enough information isn't going to magically get you an answer.

I don't have any problem sharing files between XP, Vista, Leopard (and Tiger
before I upgraded to Leopard), and Linux. Of course, I'm not trying to map
a drive, either (and why would you want to map a drive instead of just
sharing it?). So you're doing something wrong but I can't guess what that
is unless you are willing to spend a little more time providing
information.

Malke
--
MS-MVP
Elephant Boy Computers
www.elephantboycomputers.com
Don't Panic!

Hi Malke,

promise I've not posted anything here before but I am very confused and
this seemed to be on the right subject.
I have a Sony Vaio (VGN FZ21E) which seems like a lovely machine but
having had enough of Vista (home premium) i thought I'd try an iMac for
a home computer (OS X ver 10.5.5). I can't get the two to talk to each
other. I've tried making the changes to the registry suggested, I've
set the accounts to the same names (at least I think I have) but no
success. The Mac seems to be able to see the Sony but not the other way
round.
Any ideas?

Adam


--
very confused
------------------------------------------------------------------------
very confused's Profile: http://forums.techarena.in/members/very-confused.htm
View this thread: http://forums.techarena.in/windows-v...ork/930717.htm

http://forums.techarena.in

very confused wrote:


Hi Malke,

promise I've not posted anything here before but I am very confused and
this seemed to be on the right subject.
I have a Sony Vaio (VGN FZ21E) which seems like a lovely machine but
having had enough of Vista (home premium) i thought I'd try an iMac for
a home computer (OS X ver 10.5.5). I can't get the two to talk to each
other. I've tried making the changes to the registry suggested, I've
set the accounts to the same names (at least I think I have) but no
success. The Mac seems to be able to see the Sony but not the other way
round.

All I can do is give you the instructions for the Windows side once again.
It sounds like the Mac is set up fine. Go through them carefully. You're
missing something on the Vista machine, probably a misconfigured firewall
and/or missing user accounts/passwords. You cannot "set the accounts to the
same names" by simply changing the names in the User Accounts applet in
Windows. You need to create actual user accounts that match and have
passwords.

Problems sharing files between computers on a network are generally caused
by 1) a misconfigured firewall or overlooked firewall (including a stateful
firewall in a VPN); or 2) inadvertently running two firewalls such as the
built-in Windows Firewall and a third-party firewall; and/or 3) not having
identical user accounts and passwords on all Workgroup machines; 4) trying
to create shares where the operating system does not permit it.

A. Configure firewalls on all machines to allow the Local Area Network (LAN)
traffic as trusted. With Windows Firewall, this means allowing File/Printer
Sharing on the Exceptions tab. Normally running the Network Setup Wizard on
XP will take care of this for those machines.The only "gotcha" is that this
will turn on the XPSP2 Windows Firewall. If you aren't running a
third-party firewall or have an antivirus/security program with its own
firewall component, then you're fine. With third-party firewalls, I
usually configure the LAN allowance with an IP range. Ex. would be
192.168.1.0-192.168.1.254. Obviously you would substitute your correct
subnet. Refer to any third party security program's Help or user forums for
how to properly configure its firewall. Do not run more than one firewall.
DO NOT TURN OFF FIREWALLS; CONFIGURE THEM CORRECTLY.

B. For ease of organization, put all computers in the same Workgroup. This
is done from the System applet in Control Panel, Computer Name tab.

C. Create matching user accounts and passwords on all machines. You do not
need to be logged into the same account on all machines and the passwords
assigned to each user account can be different; the accounts/passwords just
need to exist and match on all machines. DO NOT NEGLECT TO CREATE
PASSWORDS, EVEN IF ONLY SIMPLE ONES. If you wish a machine to boot directly
to the Desktop (into one particular user's account) for convenience, you
can do this. The instructions at this link work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
FAQ - http://www.elephantboycomputers.com/#FAQ