Vista RC1 - When launching Task manager it constantly shows 40%-60% CPU load,
even when no other application is running. System (NT kernel & System)
process takes around 10%, svchost takes 20%-30% and System Idle process is
around 50% (this one takes no less then 97% on my XP, same hardware). Is this
normal?

[P4HT/3GHz/1GB]

TIA

Only see 2-4% cpu load (with some background services active) on mine.
Physical memory is around 50% utilized though.
--
John

PC: (XPS Gen 1) laptop
Mem 1 gb
processor P4 3.4
Video ATI 9800 256 MB
Vista RC1 build 5600
Base score 4.3


"Yoavb" wrote:

Vista RC1 - When launching Task manager it constantly shows 40%-60% CPU load,
even when no other application is running. System (NT kernel & System)
process takes around 10%, svchost takes 20%-30% and System Idle process is
around 50% (this one takes no less then 97% on my XP, same hardware). Is this
normal?

[P4HT/3GHz/1GB]

TIA

"JJ" wrote:

Only see 2-4% cpu load (with some background services active) on mine.
Physical memory is around 50% utilized though.
--
John

PC: (XPS Gen 1) laptop
Mem 1 gb
processor P4 3.4
Video ATI 9800 256 MB
Vista RC1 build 5600
Base score 4.3


"Yoavb" wrote:

Vista RC1 - When launching Task manager it constantly shows 40%-60% CPU load,
even when no other application is running. System (NT kernel & System)
process takes around 10%, svchost takes 20%-30% and System Idle process is
around 50% (this one takes no less then 97% on my XP, same hardware). Is this
normal?

[P4HT/3GHz/1GB]

TIA


I am also receiving 100 precent CPU usage. the ZCfgSvc.exe process is using
up any spare CPU time available.

XPS Gen 2
2Ghz Pentium M
1GB Ram
NVIDIA Geforce Go 6800 Ultra

I'm seeing the same problem. I hope somebody has an answer because
explorer.exe just jumped up to 45-50% today, causing my system to run at 100%
CPU load all the time.

Intel D865GBF MB
Intel P4HT 3.2 gHz
Nvidia FX5200
160 Gb Eide Drive
--
Bert


"Albert Gross" wrote:



"JJ" wrote:

Only see 2-4% cpu load (with some background services active) on mine.
Physical memory is around 50% utilized though.
--
John

PC: (XPS Gen 1) laptop
Mem 1 gb
processor P4 3.4
Video ATI 9800 256 MB
Vista RC1 build 5600
Base score 4.3


"Yoavb" wrote:

Vista RC1 - When launching Task manager it constantly shows 40%-60% CPU load,
even when no other application is running. System (NT kernel & System)
process takes around 10%, svchost takes 20%-30% and System Idle process is
around 50% (this one takes no less then 97% on my XP, same hardware). Is this
normal?

[P4HT/3GHz/1GB]

TIA


I am also receiving 100 precent CPU usage. the ZCfgSvc.exe process is using
up any spare CPU time available.

XPS Gen 2
2Ghz Pentium M
1GB Ram
NVIDIA Geforce Go 6800 Ultra

I have an issue that is mind-blowing: I did an upgrade to Vista over XP Pro,
SP2. I have word 2002. I have a document that has tables in it. When I open
that document, my cpu utilization jumps to 100% and I get a rapid flashing of
wait/cursor while the document is open and it is word.exe that is causing the
spiking jumps. If I open a menu, which takes focus off the document, then,
after a delay, the cpu monitor drops down into the low teens and high single
digits again.

I did some experiments today and opened a bunch of different documents. Only
a small handful cause this strange behavior and to nowhere near the cpu jump
my one document with all the tables in it has. In one instance that I did not
repro, when I closed Word, I still had 99% cpu, and checking processes it was
explorer. I ended the process and cpu meter dropped right back down.

Further experiment: I can open Word with just a blip on the meter. I just
happened, with a blank document, to open the Page Setup and as soon as I did
so, I started getting the cpu cycles jumping up and hitting 100%.

I need to uninstall and reinstall my Office XP small business edition but
have been holding off hoping I would get some answer from someone before I do
so.

"Bert" wrote:

I'm seeing the same problem. I hope somebody has an answer because
explorer.exe just jumped up to 45-50% today, causing my system to run at 100%
CPU load all the time.

Intel D865GBF MB
Intel P4HT 3.2 gHz
Nvidia FX5200
160 Gb Eide Drive
--
Bert


"Albert Gross" wrote:



"JJ" wrote:

Only see 2-4% cpu load (with some background services active) on mine.
Physical memory is around 50% utilized though.
--
John

PC: (XPS Gen 1) laptop
Mem 1 gb
processor P4 3.4
Video ATI 9800 256 MB
Vista RC1 build 5600
Base score 4.3


"Yoavb" wrote:

Vista RC1 - When launching Task manager it constantly shows 40%-60% CPU load,
even when no other application is running. System (NT kernel & System)
process takes around 10%, svchost takes 20%-30% and System Idle process is
around 50% (this one takes no less then 97% on my XP, same hardware). Is this
normal?

[P4HT/3GHz/1GB]

TIA


I am also receiving 100 precent CPU usage. the ZCfgSvc.exe process is using
up any spare CPU time available.

XPS Gen 2
2Ghz Pentium M
1GB Ram
NVIDIA Geforce Go 6800 Ultra

Have you tried a repair of your Office suite?

--
Jane, not plain 64 bit enabled
Batteries not included. Braincell on vacation :-)
"Insight Driver" wrote in message
...
I have an issue that is mind-blowing: I did an upgrade to Vista over XP
Pro,
SP2. I have word 2002. I have a document that has tables in it. When I
open
that document, my cpu utilization jumps to 100% and I get a rapid flashing
of
wait/cursor while the document is open and it is word.exe that is causing
the
spiking jumps. If I open a menu, which takes focus off the document, then,
after a delay, the cpu monitor drops down into the low teens and high
single
digits again.

I did some experiments today and opened a bunch of different documents.
Only
a small handful cause this strange behavior and to nowhere near the cpu
jump
my one document with all the tables in it has. In one instance that I did
not
repro, when I closed Word, I still had 99% cpu, and checking processes it
was
explorer. I ended the process and cpu meter dropped right back down.

Further experiment: I can open Word with just a blip on the meter. I just
happened, with a blank document, to open the Page Setup and as soon as I
did
so, I started getting the cpu cycles jumping up and hitting 100%.

I need to uninstall and reinstall my Office XP small business edition but
have been holding off hoping I would get some answer from someone before I
do
so.

"Bert" wrote:

I'm seeing the same problem. I hope somebody has an answer because
explorer.exe just jumped up to 45-50% today, causing my system to run at
100%
CPU load all the time.

Intel D865GBF MB
Intel P4HT 3.2 gHz
Nvidia FX5200
160 Gb Eide Drive
--
Bert


"Albert Gross" wrote:



"JJ" wrote:

Only see 2-4% cpu load (with some background services active) on
mine.
Physical memory is around 50% utilized though.
--
John

PC: (XPS Gen 1) laptop
Mem 1 gb
processor P4 3.4
Video ATI 9800 256 MB
Vista RC1 build 5600
Base score 4.3


"Yoavb" wrote:

Vista RC1 - When launching Task manager it constantly shows 40%-60%
CPU load,
even when no other application is running. System (NT kernel &
System)
process takes around 10%, svchost takes 20%-30% and System Idle
process is
around 50% (this one takes no less then 97% on my XP, same
hardware). Is this
normal?

[P4HT/3GHz/1GB]

TIA


I am also receiving 100 precent CPU usage. the ZCfgSvc.exe process is
using
up any spare CPU time available.

XPS Gen 2
2Ghz Pentium M
1GB Ram
NVIDIA Geforce Go 6800 Ultra

I am having the same problem I have a Core 2 duo and constantly have about
80% of one of my cores at load. All I can find is that the kernel is taking
up all this processing power


"Yoavb" wrote:

Vista RC1 - When launching Task manager it constantly shows 40%-60% CPU load,
even when no other application is running. System (NT kernel & System)
process takes around 10%, svchost takes 20%-30% and System Idle process is
around 50% (this one takes no less then 97% on my XP, same hardware). Is this
normal?

[P4HT/3GHz/1GB]

TIA

Same exact problem, I'm glad i read this, I was very close to opening up a
new processor. Mine also started all of a sudden, 3 or 4 days ago I guess.
Even in basic mode I can barely watch tv, whereas before I used aero and a tv
window in the background of whatever application I was using. Ive been
jacking with the visual options for a few minuites with little success.

"Bert" wrote:

I'm seeing the same problem. I hope somebody has an answer because
explorer.exe just jumped up to 45-50% today, causing my system to run at 100%
CPU load all the time.

Intel D865GBF MB
Intel P4HT 3.2 gHz
Nvidia FX5200
160 Gb Eide Drive
--
Bert


"Albert Gross" wrote:



"JJ" wrote:

Only see 2-4% cpu load (with some background services active) on mine.
Physical memory is around 50% utilized though.
--
John

PC: (XPS Gen 1) laptop
Mem 1 gb
processor P4 3.4
Video ATI 9800 256 MB
Vista RC1 build 5600
Base score 4.3


"Yoavb" wrote:

Vista RC1 - When launching Task manager it constantly shows 40%-60% CPU load,
even when no other application is running. System (NT kernel & System)
process takes around 10%, svchost takes 20%-30% and System Idle process is
around 50% (this one takes no less then 97% on my XP, same hardware). Is this
normal?

[P4HT/3GHz/1GB]

TIA


I am also receiving 100 precent CPU usage. the ZCfgSvc.exe process is using
up any spare CPU time available.

XPS Gen 2
2Ghz Pentium M
1GB Ram
NVIDIA Geforce Go 6800 Ultra

Hey I think I found the problem Apparently the high cpu usage is from
hardware interupts. I am still researching on how to fix it though


"Jason D" wrote:

I am having the same problem I have a Core 2 duo and constantly have about
80% of one of my cores at load. All I can find is that the kernel is taking
up all this processing power


"Yoavb" wrote:

Vista RC1 - When launching Task manager it constantly shows 40%-60% CPU load,
even when no other application is running. System (NT kernel & System)
process takes around 10%, svchost takes 20%-30% and System Idle process is
around 50% (this one takes no less then 97% on my XP, same hardware). Is this
normal?

[P4HT/3GHz/1GB]

TIA

I have finally figured out the problem. It appears to be a driver conflict.
To see if this is the problem on your system download "Process Explorer
v10.2" from sysinternals.com. If you see 30-40% to Hardware Interupts. A
driver is your problem. This took me forever to figure out. My conflict was
with my sound card. Well good luck to the rest of yall. thanks for all your
help.

"drinkdrive" wrote:

Same exact problem, I'm glad i read this, I was very close to opening up a
new processor. Mine also started all of a sudden, 3 or 4 days ago I guess.
Even in basic mode I can barely watch tv, whereas before I used aero and a tv
window in the background of whatever application I was using. Ive been
jacking with the visual options for a few minuites with little success.

"Bert" wrote:

I'm seeing the same problem. I hope somebody has an answer because
explorer.exe just jumped up to 45-50% today, causing my system to run at 100%
CPU load all the time.

Intel D865GBF MB
Intel P4HT 3.2 gHz
Nvidia FX5200
160 Gb Eide Drive
--
Bert


"Albert Gross" wrote:



"JJ" wrote:

Only see 2-4% cpu load (with some background services active) on mine.
Physical memory is around 50% utilized though.
--
John

PC: (XPS Gen 1) laptop
Mem 1 gb
processor P4 3.4
Video ATI 9800 256 MB
Vista RC1 build 5600
Base score 4.3


"Yoavb" wrote:

Vista RC1 - When launching Task manager it constantly shows 40%-60% CPU load,
even when no other application is running. System (NT kernel & System)
process takes around 10%, svchost takes 20%-30% and System Idle process is
around 50% (this one takes no less then 97% on my XP, same hardware). Is this
normal?

[P4HT/3GHz/1GB]

TIA


I am also receiving 100 precent CPU usage. the ZCfgSvc.exe process is using
up any spare CPU time available.

XPS Gen 2
2Ghz Pentium M
1GB Ram
NVIDIA Geforce Go 6800 Ultra