![]() |
|
Welcome to Vista Banter. You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to ask questions and reply to others posts, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact support. |
|
|||||||
| Networking with Windows Vista Networking issues and questions with Windows Vista. (microsoft.public.windows.vista.networking_sharing) |
|
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Hi Everyone,
I decide to re-baseline my desktop home system with a fresh install of Windows Vista Ultimate. Everything seemed to install correctly. Vista picked up most of the drivers and I was able to supply the ones it didn’t. After setup and re-boot, I noticed that the desktop/sidebar appears reasonably fast, after which there is a delay of about a minute with some disk activity during which the Network icon in System Tray has a red X. After about a minute or so, there is a great deal of disk activity (the system seems to be paging). The delay continues further until finally the yellow exclamation symbol appears, quickly followed by the globe icon. The system then functions as normal. The delay can be anywhere between 1-3 minutes. My motherboard has 3 network connections; 1 direct connection to my NAS server, 1 to the ADSL modem, 1 wireless. I have spent the last 2 days trying to resolve this issue, so any help would be greatly appreciated. Brant |
|
|||
|
For troubleshooting, start the computer with clean boot.
Windows general How to run Windows OS with a clean boot · How to Run Windows Safe Mode with Networking · How to setup DHCP for IP Phone How to sort programs in Start ... http://www.howtonetworking.com/Windo...owsgeneral.htm -- Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "BrantRaven" wrote in message ... Hi Everyone, I decide to re-baseline my desktop home system with a fresh install of Windows Vista Ultimate. Everything seemed to install correctly. Vista picked up most of the drivers and I was able to supply the ones it didn’t. After setup and re-boot, I noticed that the desktop/sidebar appears reasonably fast, after which there is a delay of about a minute with some disk activity during which the Network icon in System Tray has a red X. After about a minute or so, there is a great deal of disk activity (the system seems to be paging). The delay continues further until finally the yellow exclamation symbol appears, quickly followed by the globe icon. The system then functions as normal. The delay can be anywhere between 1-3 minutes. My motherboard has 3 network connections; 1 direct connection to my NAS server, 1 to the ADSL modem, 1 wireless. I have spent the last 2 days trying to resolve this issue, so any help would be greatly appreciated. Brant |
|
|||
|
With respect Robert, your post isnt excatly helpful. I have started my
machine in safe mode...but this doesnt really allow me to discover the issue unless I have an general idea of what the issue actually is..which at this stage I dont. In safe mode, the machine reacts exactly the same way in does in normal mode. Again, I totally have no idea what the issue might be. Brant "Robert L. (MS-MVP)" wrote: For troubleshooting, start the computer with clean boot. Windows general How to run Windows OS with a clean boot · How to Run Windows Safe Mode with Networking · How to setup DHCP for IP Phone How to sort programs in Start ... http://www.howtonetworking.com/Windo...owsgeneral.htm -- Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "BrantRaven" wrote in message ... Hi Everyone, I decide to re-baseline my desktop home system with a fresh install of Windows Vista Ultimate. Everything seemed to install correctly. Vista picked up most of the drivers and I was able to supply the ones it didn’t. After setup and re-boot, I noticed that the desktop/sidebar appears reasonably fast, after which there is a delay of about a minute with some disk activity during which the Network icon in System Tray has a red X. After about a minute or so, there is a great deal of disk activity (the system seems to be paging). The delay continues further until finally the yellow exclamation symbol appears, quickly followed by the globe icon. The system then functions as normal. The delay can be anywhere between 1-3 minutes. My motherboard has 3 network connections; 1 direct connection to my NAS server, 1 to the ADSL modem, 1 wireless. I have spent the last 2 days trying to resolve this issue, so any help would be greatly appreciated. Brant |
|
|||
|
I have spent the last 2 days trying to resolve this issue, so any help
would be greatly appreciated. What have you done so far? -Frank |
|
|||
|
To try and remediate the problem so far I have done a few things. Here is a
short list of what I have tried; - Looked at the network hardware to ensure that a DHCP IP is being delivered..it is. - Looked at the NICs and ensured that power management and similar features were not enabled - Disabled wireless. I have read that the issue does happen with wireless. Didnd work!! - Disabled firewall. Didnt work! - Disabled defender real time protection. Didnt work!! - Disabled the workstation service. Didnt work!! - Disabled SuperFetch. Didnt work!! Tried a few other bits and pieces. Nothing seems to work. Brant "Frankster" wrote: I have spent the last 2 days trying to resolve this issue, so any help would be greatly appreciated. What have you done so far? -Frank |
|
|||
|
"BrantRaven" wrote in message ... To try and remediate the problem so far I have done a few things. Here is a short list of what I have tried; - Looked at the network hardware to ensure that a DHCP IP is being delivered..it is. - Looked at the NICs and ensured that power management and similar features were not enabled - Disabled wireless. I have read that the issue does happen with wireless. Didnd work!! - Disabled firewall. Didnt work! - Disabled defender real time protection. Didnt work!! - Disabled the workstation service. Didnt work!! - Disabled SuperFetch. Didnt work!! Tried a few other bits and pieces. Nothing seems to work. Brant "Frankster" wrote: I have spent the last 2 days trying to resolve this issue, so any help would be greatly appreciated. What have you done so far? -Frank Have you looked in your windows error logs to see if perhaps some other service is delaying the startup and the network connection comes after that? Also, if you do a /release /renew, is there any delay? Just a thought. -Frank |
|
|||
|
Also... check Device Manager for errors. You might also want to use Device
Manager to update your NIC drivers. And maybe your disk controller drivers. I've seen some occasions where the built-in disk drivers did not properly identify the drive type/capabilities and installing the drivers from the vendor's site improved performance. It could be something other than the network connection itself causing the delay. -Frank "BrantRaven" wrote in message ... To try and remediate the problem so far I have done a few things. Here is a short list of what I have tried; - Looked at the network hardware to ensure that a DHCP IP is being delivered..it is. - Looked at the NICs and ensured that power management and similar features were not enabled - Disabled wireless. I have read that the issue does happen with wireless. Didnd work!! - Disabled firewall. Didnt work! - Disabled defender real time protection. Didnt work!! - Disabled the workstation service. Didnt work!! - Disabled SuperFetch. Didnt work!! Tried a few other bits and pieces. Nothing seems to work. Brant "Frankster" wrote: I have spent the last 2 days trying to resolve this issue, so any help would be greatly appreciated. What have you done so far? -Frank |
|
|||
|
On Sun, 8 Jun 2008 05:02:00 -0700, BrantRaven
wrote: Hi Everyone, I decide to re-baseline my desktop home system with a fresh install of Windows Vista Ultimate. Everything seemed to install correctly. Vista picked up most of the drivers and I was able to supply the ones it didn’t. After setup and re-boot, I noticed that the desktop/sidebar appears reasonably fast, after which there is a delay of about a minute with some disk activity during which the Network icon in System Tray has a red X. After about a minute or so, there is a great deal of disk activity (the system seems to be paging). The delay continues further until finally the yellow exclamation symbol appears, quickly followed by the globe icon. The system then functions as normal. The delay can be anywhere between 1-3 minutes. My motherboard has 3 network connections; 1 direct connection to my NAS server, 1 to the ADSL modem, 1 wireless. I have spent the last 2 days trying to resolve this issue, so any help would be greatly appreciated. Brant Let me ask a slightly different question, whose answer might let you tune your system to be a bit more usefully responsive after booting. "Is there any way to specify the order in which automatically-started programs and services are invoked?" -- Jay (remove dashes for legal email address) |
|
|||
|
Thanks for the suggestions. I have tried several of these already but with no
luck at all. There doesnt seem to be anything obvious that is going wrong or any particular component that is failing. This issue has been reported across various tech sites and blogs. It seems to be a common problem and while people have made suggestions for a fix nothing has seemed to solve the problem. Currently my system experiences at least a 3 minute delay after reboot. Brant "Frankster" wrote: Also... check Device Manager for errors. You might also want to use Device Manager to update your NIC drivers. And maybe your disk controller drivers. I've seen some occasions where the built-in disk drivers did not properly identify the drive type/capabilities and installing the drivers from the vendor's site improved performance. It could be something other than the network connection itself causing the delay. -Frank "BrantRaven" wrote in message ... To try and remediate the problem so far I have done a few things. Here is a short list of what I have tried; - Looked at the network hardware to ensure that a DHCP IP is being delivered..it is. - Looked at the NICs and ensured that power management and similar features were not enabled - Disabled wireless. I have read that the issue does happen with wireless. Didnd work!! - Disabled firewall. Didnt work! - Disabled defender real time protection. Didnt work!! - Disabled the workstation service. Didnt work!! - Disabled SuperFetch. Didnt work!! Tried a few other bits and pieces. Nothing seems to work. Brant "Frankster" wrote: I have spent the last 2 days trying to resolve this issue, so any help would be greatly appreciated. What have you done so far? -Frank |
|
|||
|
"BrantRaven" wrote in message ... Thanks for the suggestions. I have tried several of these already but with no luck at all. There doesnt seem to be anything obvious that is going wrong or any particular component that is failing. This issue has been reported across various tech sites and blogs. It seems to be a common problem and while people have made suggestions for a fix nothing has seemed to solve the problem. Currently my system experiences at least a 3 minute delay after reboot. Brant Try running with a fixed IP and see if it clears things up. If it does, you now at least have a smaller subset of things to look at... "Frankster" wrote: Also... check Device Manager for errors. You might also want to use Device Manager to update your NIC drivers. And maybe your disk controller drivers. I've seen some occasions where the built-in disk drivers did not properly identify the drive type/capabilities and installing the drivers from the vendor's site improved performance. It could be something other than the network connection itself causing the delay. -Frank "BrantRaven" wrote in message ... To try and remediate the problem so far I have done a few things. Here is a short list of what I have tried; - Looked at the network hardware to ensure that a DHCP IP is being delivered..it is. - Looked at the NICs and ensured that power management and similar features were not enabled - Disabled wireless. I have read that the issue does happen with wireless. Didnd work!! - Disabled firewall. Didnt work! - Disabled defender real time protection. Didnt work!! - Disabled the workstation service. Didnt work!! - Disabled SuperFetch. Didnt work!! Tried a few other bits and pieces. Nothing seems to work. Brant "Frankster" wrote: I have spent the last 2 days trying to resolve this issue, so any help would be greatly appreciated. What have you done so far? -Frank |
|
| Thread Tools | |
| Display Modes | |
|
|