A Windows Vista forum. Vista Banter

Welcome to Vista Banter.

You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to ask questions and reply to others posts, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact support.

Go Back   Home » Vista Banter forum » Microsoft Windows Vista » Networking with Windows Vista
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Networking with Windows Vista Networking issues and questions with Windows Vista. (microsoft.public.windows.vista.networking_sharing)

VPN IPSec error 789



 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old July 24th 08, 12:40 PM posted to microsoft.public.windows.vista.networking_sharing
Franz Schenk
external usenet poster
 
Posts: 5
Default VPN IPSec error 789

Try to establish from my Vista SP1 client an L2TP/IPSec connection to our
Windows 2003 IAS/RRAS servers. There is no NAT between client and server
- Have certificate based authentication, the machine certificate is
installed, with a valid certificate path
- IPSec connection to the same VPN server works fine with Windows XP
clients, and from a Windows XP VM hosted on the same Vista client
- Getting always error 789 when trying to connect
- Have googled, and the only hint was to try to clean boot Vista. Have done
this (disabled all 3rd party services in msconfig), but still have the same
problem.
- Have enabled diagnostic logging in Vista, but I'm unable to decrypt all
information. Below are some extracts of the Logs

Thank you all for any advice about this issue!
Franz

--------------------------

rasman.log

[1408] 07-24 14:22:50:956: EnableIpSec: port=VPN0-1, fServer=0, fEnable = 1,
rc=0x0
[1408] 07-24 14:22:50:956: DwDoIke: port=VPN0-1, hEvent=0x14ec
[1408] 07-24 14:22:50:956: IsIPAddress: 62.2.xxx.xxx is a valid IPV4 String
[1408] 07-24 14:22:50:956: IsIKESecureCheckDisabled: Destination address is
an IPAddress, Disable the IKESecurity Check
[1408] 07-24 14:22:50:956: DisableIKESecurityCheck flag is 1 and
IsIKESecureCheckDisabled returns with 0
[1408] 07-24 14:22:50:960: Found primary ip address for this interface.
wType=0x5,address=0x3d01a8c0
[1408] 07-24 14:22:50:961: DwGetBestInterface: done. rc=0x0,
address=0x3d01a8c0, mask=0xffffff
[1408] 07-24 14:22:50:961: DwDoIke: done. 0x0
[1408] 07-24 14:22:50:961: DwDoIke for port VPN0-1 returned 0x0
[1408] 07-24 14:22:50:961: DoIke done. 0x0
[3124] 07-24 14:22:54:523: BackGoundCleanUp
[3124] 07-24 14:22:54:523: OVEVT_RASMAN_ADJUST_TIMER
[3124] 07-24 14:23:04:523: BackGoundCleanUp
[3124] 07-24 14:23:04:523: OVEVT_RASMAN_ADJUST_TIMER
[3124] 07-24 14:23:14:523: BackGoundCleanUp
[3124] 07-24 14:23:14:523: OVEVT_RASMAN_ADJUST_TIMER
[3124] 07-24 14:23:24:523: BackGoundCleanUp
[3124] 07-24 14:23:24:523: OVEVT_RASMAN_ADJUST_TIMER
[3124] 07-24 14:23:34:524: BackGoundCleanUp
[3124] 07-24 14:23:34:524: OVEVT_RASMAN_ADJUST_TIMER
[3124] 07-24 14:23:44:524: BackGoundCleanUp
[3124] 07-24 14:23:44:524: OVEVT_RASMAN_ADJUST_TIMER
[3124] 07-24 14:23:54:524: BackGoundCleanUp
[3124] 07-24 14:23:54:524: OVEVT_RASMAN_ADJUST_TIMER
[1408] 07-24 14:23:55:958: DwQueryIkeStatus: retcode=0x0, status=0x78b
[1408] 07-24 14:23:55:959: DwQueryIkeStatus: Freeing IkeInitiateContext
handle 0x316a400
[5652] 07-24 14:23:55:961: ReferenceCustomCount
[5652] 07-24 14:23:55:961: ReferenceCustomCount done. 0
[5652] 07-24 14:23:55:962: RefConnection: 0xa0000
[5652] 07-24 14:23:55:962: refcount=0, maxports=6, ports=1
[5652] 07-24 14:23:55:962: RefConnection: ref on 0xa0000 = 0
[5652] 07-24 14:23:55:963: PortDisconnectRequest - calling
CheckIfAllowedToDisconnectOREnumerate
[5652] 07-24 14:23:55:970: DwSendNotificationInternal(DISCONNECTING)
returned 0x0
[5652] 07-24 14:23:55:970: QueueCloseConnections: no dependent connections


C:\Windows\tracing\tapi32.LOG
-------------------------------------------------------------------------------

[1408] 14:22:50:846: [TRACE] DoFunc -- enter
[1408] 14:22:50:846: [TRACE] AllocClientResources: enter
[1408] 14:22:50:846: [TRACE] AllocClientResources: exit, returning x0
[1408] 14:22:50:847: [TRACE] DoFunc: back from srv- return code=0x00000000
[1408] 14:22:50:847: [TRACE] DoFunc: result = x0
[1408] 14:22:50:847: [TRACE] DoFunc -- enter
[1408] 14:22:50:847: [TRACE] AllocClientResources: enter
[1408] 14:22:50:847: [TRACE] AllocClientResources: exit, returning x0
[1408] 14:22:50:848: [TRACE] DoFunc: back from srv- return code=0x80000023
[1408] 14:22:50:848: [TRACE] DoFunc: result = x80000023
[1408] 14:22:50:849: [TRACE] DoFunc -- enter
[1408] 14:22:50:849: [TRACE] AllocClientResources: enter
[1408] 14:22:50:849: [TRACE] AllocClientResources: exit, returning x0
[1408] 14:22:50:850: [TRACE] DoFunc: back from srv- return code=0x00000000
[1408] 14:22:50:850: [TRACE] DoFunc: result = x0
[1408] 14:22:50:850: [TRACE] DoFunc -- enter
[1408] 14:22:50:850: [TRACE] AllocClientResources: enter
[1408] 14:22:50:850: [TRACE] AllocClientResources: exit, returning x0
[1408] 14:22:50:852: [TRACE] DoFunc: back from srv- return code=0x80000023
[1408] 14:22:50:852: [TRACE] DoFunc: result = x80000023
[1408] 14:22:50:942: [TRACE] DoFunc -- enter
[1408] 14:22:50:942: [TRACE] AllocClientResources: enter
[1408] 14:22:50:942: [TRACE] AllocClientResources: exit, returning x0
[1408] 14:22:50:942: [TRACE] DoFunc: back from srv- return code=0x00000000
[1408] 14:22:50:942: [TRACE] DoFunc: result = x0
[1408] 14:22:50:942: [TRACE] DoFunc -- enter
[1408] 14:22:50:942: [TRACE] AllocClientResources: enter
[1408] 14:22:50:942: [TRACE] AllocClientResources: exit, returning x0
[1408] 14:22:50:943: [TRACE] DoFunc: back from srv- return code=0x00000000
[1408] 14:22:50:943: [TRACE] DoFunc: result = x0
[1408] 14:22:50:943: [TRACE] DoFunc -- enter
[1408] 14:22:50:943: [TRACE] AllocClientResources: enter
[1408] 14:22:50:943: [TRACE] AllocClientResources: exit, returning x0
[1408] 14:22:50:943: [TRACE] DoFunc: back from srv- return code=0x80000049
[1408] 14:22:50:943: [TRACE] DoFunc: result = x80000049
[5652] 14:23:55:971: [TRACE] DoFunc -- enter
[5652] 14:23:55:971: [TRACE] AllocClientResources: enter
[5652] 14:23:55:971: [TRACE] AllocClientResources: exit, returning x0



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 11:44 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.Search Engine Optimization by vBSEO 3.0.0 RC6
Copyright ©2004-2012 Vista Banter.
The comments are property of their posters.