![]() |
|
Welcome to Vista Banter. You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to ask questions and reply to others posts, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact support. |
|
|||||||
| Networking with Windows Vista Networking issues and questions with Windows Vista. (microsoft.public.windows.vista.networking_sharing) |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Vista Home premuim. Network settings correct on both PCs. From Vista I can
ping the XP by IP address and by Computer name. From Vista I can map a drive on the XP using either IP or computer name. However In Network XP PC name is present but double-click says no access. Shared printer on XP is not found by Vista Add Printer. XP can see Vista in Network Places and double-click shows shared folders. What is next step? -- Doug |
|
|||
|
You may need to try this. 1. On your network, look at the computer name for the computer you wish to connect to (Host) and click in to it. You should be able to see the name of the printer you wish to connect. You will need these 2 names for step number 7/8. 2. Now click on the Printers icon in the control panel. 3. Right click on a blank portion of the screen, select add printer and a menu will pop up. 4. Choose the add local printer option. 5. Now choose 'Create New Port'. 6. Click Next. 7. Another popup screen will open. This is where you need the computer and printer name. 8. Enter the following into the box \\computername\printername 9. Click OK 10. It will now prompt you to pick your printer firmware. Select your model. 11. Click Next. It will now ask to either use the installed driver, or replace the current driver. Pick what you wish. 12. Click Next. Type in a printer name. And either select, or unselect the 'Set as Default Printer Option. 13. It will now install the printer. 14. You have now successfully added a printer. You can now test a print sheet. *This information has been proven to work, as this is how I set up my printer. This should be a fairly straight forward tutorial. NOTE: The host computer must be ON to print, along with the computer that is sending the document. Remember the printer also must be on to print. Hope this works for you, Extensa -- Extensa *Acer Extensa 5620 Notebook *Windows Vista Home Premium x64 *15.4 WXGA (1280x800*320GB Hard Disk *Intel Core 2 Duo 5750 @ 2.0 GHz *ATI Mobility Radeon HD 2400XT *4GB DDR2 667 SDRAM |
|
|||
|
And when you go through VistaNetworkNetwork and SharingAdd Network
DeviceBrowse to XP computer, make sure you have a vista compatible Printer driver to install on the Vista Machine. -- Mick Murphy - Qld - Australia "Doug" wrote: Vista Home premuim. Network settings correct on both PCs. From Vista I can ping the XP by IP address and by Computer name. From Vista I can map a drive on the XP using either IP or computer name. However In Network XP PC name is present but double-click says no access. Shared printer on XP is not found by Vista Add Printer. XP can see Vista in Network Places and double-click shows shared folders. What is next step? -- Doug |
|
|||
|
Below is how to Network XP and Vista.
Turn ON XP's file and printer Sharing; info below! http://technet.microsoft.com/en-us/l.../bb727037.aspx Have a read of the above link re Vista File and Printer Sharing. Permissions/Share info is there as well. If using Norton, McAfee, Trend Micro I.S., make sure file and printer sharing is enabled in THEIR firewall (or LAN allowed, depending on how their Exceptions are worded in their Firewall) 1st thing to do is make sure that the Workgroup Name of ALL the computers is the SAME. In Vista Network and Sharing: Network Discovery: ON (So it can see the other computers) Network set to Private (Public is for hotspots, airports, etc) File Sharing: ON Public Folder Sharing: ON (Vista’s Public Folder is the same as XP’s Shared Docs) Password Protected: OFF (unless you want to set up identical usernames and passwords (passwords can be different) on ALL computers in your Network) If you have it ON, you will be asked for a username and password when you try to access a Vista computer from an XP computer, or a Vista computer. Also, run the XP’s Home or Small Office Network File and Printer Sharing Wizard to include Vista in your “New” Network, even if you had an XP Network set up prior to adding a Vista computer to it(redoing the Wizard seems to work for XP machines!). In “My Network Places”: “Set up a Home or Small Office Network” OR under Accessories Communications Network Setup Wizard Allow File and Printer Sharing. -- Mick Murphy - Qld - Australia "Doug" wrote: Vista Home premuim. Network settings correct on both PCs. From Vista I can ping the XP by IP address and by Computer name. From Vista I can map a drive on the XP using either IP or computer name. However In Network XP PC name is present but double-click says no access. Shared printer on XP is not found by Vista Add Printer. XP can see Vista in Network Places and double-click shows shared folders. What is next step? -- Doug |
|
|||
|
Thanks for the reply but my problem is not that simple. Everything in that
link has already been done. If you note my original question, you'll see that I can map a drive from the Vista to the XP. From XP I can see Vista's Public folders. Therefore file sharing is OK. When I said Network settings are OK, I meant that both are in the same workgroup, same subnet, Netbios enabled over TCP, only Windows firewalls, both the problem exists even with firewalls disabled. No 3rd party firewalls. Vista sees both computers in Network but double-clicking the XP name brings up a no access message, even if I have Z: mapped gto \\XP\shareddocs and can see all the documents. My problem is that Vista doesn't allow me any other way to access a shared printer but through Add Printer, where it cannot see any. XP can see all of Vista in My Network Places. -- Doug "Mick Murphy" wrote: Below is how to Network XP and Vista. Turn ON XP's file and printer Sharing; info below! http://technet.microsoft.com/en-us/l.../bb727037.aspx Have a read of the above link re Vista File and Printer Sharing. Permissions/Share info is there as well. If using Norton, McAfee, Trend Micro I.S., make sure file and printer sharing is enabled in THEIR firewall (or LAN allowed, depending on how their Exceptions are worded in their Firewall) 1st thing to do is make sure that the Workgroup Name of ALL the computers is the SAME. In Vista Network and Sharing: Network Discovery: ON (So it can see the other computers) Network set to Private (Public is for hotspots, airports, etc) File Sharing: ON Public Folder Sharing: ON (Vista’s Public Folder is the same as XP’s Shared Docs) Password Protected: OFF (unless you want to set up identical usernames and passwords (passwords can be different) on ALL computers in your Network) If you have it ON, you will be asked for a username and password when you try to access a Vista computer from an XP computer, or a Vista computer. Also, run the XP’s Home or Small Office Network File and Printer Sharing Wizard to include Vista in your “New” Network, even if you had an XP Network set up prior to adding a Vista computer to it(redoing the Wizard seems to work for XP machines!). In “My Network Places”: “Set up a Home or Small Office Network” OR under Accessories Communications Network Setup Wizard Allow File and Printer Sharing. -- Mick Murphy - Qld - Australia "Doug" wrote: Vista Home premuim. Network settings correct on both PCs. From Vista I can ping the XP by IP address and by Computer name. From Vista I can map a drive on the XP using either IP or computer name. However In Network XP PC name is present but double-click says no access. Shared printer on XP is not found by Vista Add Printer. XP can see Vista in Network Places and double-click shows shared folders. What is next step? -- Doug |