Welcome to Vista Banter. You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to ask questions and reply to others posts, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact support. |
|
Hardware and Windows Vista Hardware issues in relation to Windows Vista. (microsoft.public.windows.vista.hardware_devices) |
|
LinkBack | Thread Tools | Display Modes |
|
|||
Please help with external drive issue
I have a Maxtor DiamondMax 21 320gb PATA (ultra ATA) hard drive installed in
an external case that I used on my previous OS - XP Professional. The case I had purchased from NewEgg and it worked really well via a USB connection. No software was necessary, I simply plugged it in a USB slot and it was displayed as a Mass Storage Device. I have tried the following with no luck: 1. Loading the latest MaxBlast software provided by Maxtor 2. Changing the jumper from Cable Select to Master and back I am currently using Windows Vista Home Premium 64 with SP1 ... Thank you most kindly in advance, Rob. |
|
|||
Please help with external drive issue
Rob;840960 Wrote: I have a Maxtor DiamondMax 21 320gb PATA (ultra ATA) hard drive installed in an external case that I used on my previous OS - XP Professional. The case I had purchased from NewEgg and it worked really well via a USB connection. No software was necessary, I simply plugged it in a USB slot and it was displayed as a Mass Storage Device. I have tried the following with no luck: 1. Loading the latest MaxBlast software provided by Maxtor 2. Changing the jumper from Cable Select to Master and back I am currently using Windows Vista Home Premium 64 with SP1 ... Thank you most kindly in advance, Rob. If you go into the Control Panel - System & Maint - Device Manager ... Does it show up in there when plugged in? If not, are there any unknown devices? (yellow exclamation mark in front of device) -- Cyberwolf |
|
|||
Please help with external drive issue
Thank you Cyberwolf ... I did as you suggested and there is a Mass Storage
Device with a yellow exclamation mark beside it. I clicked and used the automated "look for a solution" with no results. What next please? Thanks again sir, Rob. "Cyberwolf" wrote in message ... Rob;840960 Wrote: I have a Maxtor DiamondMax 21 320gb PATA (ultra ATA) hard drive installed in an external case that I used on my previous OS - XP Professional. The case I had purchased from NewEgg and it worked really well via a USB connection. No software was necessary, I simply plugged it in a USB slot and it was displayed as a Mass Storage Device. I have tried the following with no luck: 1. Loading the latest MaxBlast software provided by Maxtor 2. Changing the jumper from Cable Select to Master and back I am currently using Windows Vista Home Premium 64 with SP1 ... Thank you most kindly in advance, Rob. If you go into the Control Panel - System & Maint - Device Manager .. Does it show up in there when plugged in? If not, are there any unknown devices? (yellow exclamation mark in front of device) -- Cyberwolf |
|
|||
Please help with external drive issue
Rob;842878 Wrote: Thank you Cyberwolf ... I did as you suggested and there is a Mass Storage Device with a yellow exclamation mark beside it. I clicked and used the automated "look for a solution" with no results. What next please? Thanks again sir, Rob. "Cyberwolf" wrote in message ... Rob;840960 Wrote: I have a Maxtor DiamondMax 21 320gb PATA (ultra ATA) hard drive installed in an external case that I used on my previous OS - XP Professional. The case I had purchased from NewEgg and it worked really well via a USB connection. No software was necessary, I simply plugged it in a USB slot and it was displayed as a Mass Storage Device. I have tried the following with no luck: 1. Loading the latest MaxBlast software provided by Maxtor 2. Changing the jumper from Cable Select to Master and back I am currently using Windows Vista Home Premium 64 with SP1 ... Thank you most kindly in advance, Rob. If you go into the Control Panel - System & Maint - Device Manager .. Does it show up in there when plugged in? If not, are there any unknown devices? (yellow exclamation mark in front of device) -- Cyberwolf Sounds like you need to find the specific driver for your hard drive on the manuf website. Perhaps the file you downloaded isnt the correct one for your device! -- Cyberwolf |
|
|||
Please help with external drive issue
I've searched and tried all the drivers consistent with Maxtor drives and
Vista and had no luck at all. Still without the external drive... anymore suggestions? Thanks again, Rob "Cyberwolf" wrote in message ... Rob;842878 Wrote: Thank you Cyberwolf ... I did as you suggested and there is a Mass Storage Device with a yellow exclamation mark beside it. I clicked and used the automated "look for a solution" with no results. What next please? Thanks again sir, Rob. "Cyberwolf" wrote in message ... Rob;840960 Wrote: I have a Maxtor DiamondMax 21 320gb PATA (ultra ATA) hard drive installed in an external case that I used on my previous OS - XP Professional. The case I had purchased from NewEgg and it worked really well via a USB connection. No software was necessary, I simply plugged it in a USB slot and it was displayed as a Mass Storage Device. I have tried the following with no luck: 1. Loading the latest MaxBlast software provided by Maxtor 2. Changing the jumper from Cable Select to Master and back I am currently using Windows Vista Home Premium 64 with SP1 ... Thank you most kindly in advance, Rob. If you go into the Control Panel - System & Maint - Device Manager .. Does it show up in there when plugged in? If not, are there any unknown devices? (yellow exclamation mark in front of device) -- Cyberwolf Sounds like you need to find the specific driver for your hard drive on the manuf website. Perhaps the file you downloaded isnt the correct one for your device! -- Cyberwolf |
|
|||
Please help with external drive issue
On Tue, 23 Sep 2008 22:40:57 -0500, "Rob" wrote:
I've searched and tried all the drivers consistent with Maxtor drives and Vista and had no luck at all. Still without the external drive... anymore suggestions? Try this if you haven't already: in Device Manager... delete that device that shows the yellow exclamation point and restart Windows. Thanks again, Rob "Cyberwolf" wrote in message ... Rob;842878 Wrote: Thank you Cyberwolf ... I did as you suggested and there is a Mass Storage Device with a yellow exclamation mark beside it. I clicked and used the automated "look for a solution" with no results. What next please? Thanks again sir, Rob. "Cyberwolf" wrote in message ... Rob;840960 Wrote: I have a Maxtor DiamondMax 21 320gb PATA (ultra ATA) hard drive installed in an external case that I used on my previous OS - XP Professional. The case I had purchased from NewEgg and it worked really well via a USB connection. No software was necessary, I simply plugged it in a USB slot and it was displayed as a Mass Storage Device. I have tried the following with no luck: 1. Loading the latest MaxBlast software provided by Maxtor 2. Changing the jumper from Cable Select to Master and back I am currently using Windows Vista Home Premium 64 with SP1 ... Thank you most kindly in advance, Rob. If you go into the Control Panel - System & Maint - Device Manager .. Does it show up in there when plugged in? If not, are there any unknown devices? (yellow exclamation mark in front of device) -- Cyberwolf Sounds like you need to find the specific driver for your hard drive on the manuf website. Perhaps the file you downloaded isnt the correct one for your device! -- Cyberwolf |
|
|||
Please help with external drive issue
I can now see the drive in Device Manager under the drives section of the
tree, however, I am not able to locate it in Explorer. Any ideas on how to get it in Explorer so I am able to read and extract the data from the drive? Thanks again, Rob "Rob" wrote in message ... I have a Maxtor DiamondMax 21 320gb PATA (ultra ATA) hard drive installed in an external case that I used on my previous OS - XP Professional. The case I had purchased from NewEgg and it worked really well via a USB connection. No software was necessary, I simply plugged it in a USB slot and it was displayed as a Mass Storage Device. I have tried the following with no luck: 1. Loading the latest MaxBlast software provided by Maxtor 2. Changing the jumper from Cable Select to Master and back I am currently using Windows Vista Home Premium 64 with SP1 ... Thank you most kindly in advance, Rob. |