A Windows Vista forum. Vista Banter

Welcome to Vista Banter.

You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to ask questions and reply to others posts, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact support.

Go Back   Home » Vista Banter forum » Microsoft Windows Vista » Networking with Windows Vista
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Networking with Windows Vista Networking issues and questions with Windows Vista. (microsoft.public.windows.vista.networking_sharing)

How access Linksys WRT54G



 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old October 13th 08, 03:21 PM posted to microsoft.public.windows.vista.networking_sharing
langsta23
external usenet poster
 
Posts: 1
Default How access Linksys WRT54G


I just installed Vista Ultimate 64-bit. Everything is working great,
however, I cannot figure out how to access my Linksys router! When I
type in my default gateway, it comes up Page cannot be displayed. Can't
get to it in Firefox either. I can access this on my XP machines though
so it has something to do with Vista. I'm connected to the internet just
fine and can access web pages. Here's my ipconfig: (what the heck are
these Tunnel Adapter Entries?. What's IPv6 and IPv4?)

Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : hsd1.mn.comcast.net.
Link-local IPv6 Address . . . . . : fe80::11c4:9653:60de:f21d%10
IPv4 Address. . . . . . . . . . . : 192.163.10.101
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.163.10.1
Tunnel adapter Local Area Connection* 6:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : hsd1.mn.comcast.net.
Tunnel adapter Local Area Connection* 7:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 11:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . :
2001:0:4137:9e50:2042:1e95:3f5c:f59a
Link-local IPv6 Address . . . . . : fe80::2042:1e95:3f5c:f59a%11
Default Gateway . . . . . . . . . :
Tunnel adapter Local Area Connection* 12:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 13:
Connection-specific DNS Suffix . : hsd1.mn.comcast.net.
IPv6 Address. . . . . . . . . . . : 2002:c0a3:a65::c0a3:a65
Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301


--
langsta23
  #2 (permalink)  
Old October 13th 08, 03:45 PM posted to microsoft.public.windows.vista.networking_sharing
Malke[_2_]
external usenet poster
 
Posts: 4,230
Default How access Linksys WRT54G

langsta23 wrote:


I just installed Vista Ultimate 64-bit. Everything is working great,
however, I cannot figure out how to access my Linksys router! When I
type in my default gateway, it comes up Page cannot be displayed. Can't
get to it in Firefox either. I can access this on my XP machines though
so it has something to do with Vista. I'm connected to the internet just
fine and can access web pages. Here's my ipconfig: (what the heck are
these Tunnel Adapter Entries?. What's IPv6 and IPv4?)

Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : hsd1.mn.comcast.net.
Link-local IPv6 Address . . . . . : fe80::11c4:9653:60de:f21d%10
IPv4 Address. . . . . . . . . . . : 192.163.10.101
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.163.10.1


(snippage)

The first question is where did you come up with that IP addressing scheme?
You aren't using a standard one and that could be the cause of all your
problems.

IPv4 Allowable addresses for private networks:

10.0.0.0/8. The 10.0.0.0/8 private network is a Class A network ID that
supports the following range of valid IP addresses: 10.0.0.1 through
10.255.255.254.

172.16.0.0/12. The 172.16.0.0/12 private network can be interpreted either
as a block of 16 Class B network IDs or as a 20-bit assignable address
space (20 host bits) that can be used for any subnetting scheme within the
private organization. The 172.16.0.0/12 private network supports the
following range of valid IP addresses: 172.16.0.1 through 172.31.255.254.

192.168.0.0/16. The 192.168.0.0/16 private network can be interpreted either
as a block of 256 Class C network IDs or as a 16-bit assignable address
space (16 host bits) that can be used for any subnetting scheme within the
private organization. The 192.168.0.0/16 private network supports the
following range of valid IP addresses: 192.168.0.1 through 192.168.255.254.

Linksys normally uses 192.168.1.xxx with the router taking 192.168.1.1.

Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
FAQ - http://www.elephantboycomputers.com/#FAQ

  #3 (permalink)  
Old October 14th 08, 12:29 AM posted to microsoft.public.windows.vista.networking_sharing
John Thompson
external usenet poster
 
Posts: 13
Default How access Linksys WRT54G

On 2008-10-13, langsta23 wrote:

I just installed Vista Ultimate 64-bit. Everything is working great,
however, I cannot figure out how to access my Linksys router! When I
type in my default gateway, it comes up Page cannot be displayed. Can't
get to it in Firefox either. I can access this on my XP machines though
so it has something to do with Vista. I'm connected to the internet just
fine and can access web pages.


Do you have some kind of access control on the router?

Here's my ipconfig: (what the heck are
these Tunnel Adapter Entries?. What's IPv6 and IPv4?)


The tunnel entries are for VPN connections. IPv6 is the successor to
IPv4, but isn't in wide use yet.


--

John )
** Posted from http://www.teranews.com **
  #4 (permalink)  
Old January 8th 09, 03:34 PM posted to microsoft.public.windows.vista.networking_sharing
PabloGlanville
external usenet poster
 
Posts: 5
Default How access Linksys WRT54G


I have the WRT54G v 3 router and recently bought a new HP HDX with
windows vista x64 and had trouble staying connected to the internet. My
Dell running XP and Mac computer both stay connect without any problems.

I can confirm that Linksys WRT54G lower editions do not work with
Windows Vista. I changed numerous setting on computer and router,
downloaded firmware, driver, and tried every trick I could find posted
on forums to no avail. About 10 hours were spent with both Linksys
technical support and HP HDX technical support and Vista technical
support to fix the problem. Discovered this version is incompatable
(although it says compatable on Linksys web site) with Windows Vista.

Linksys tried to charge me $30 to talk to their "special technical
support" or $30 to get an extended warranty to try some "other things".
I ended up just using their online tech guys and was much happier with
their service/help - alas the "other things" did not work. Time was
lost but didn't have to pay more money for nothing.

Decided to leave Linksys after the ordeal and looking for a new router.
If you've tried everything including the help on this post - you are
not alone.


--
PabloGlanville
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 07:58 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.Search Engine Optimization by vBSEO 3.0.0 RC6
Copyright ©2004-2012 Vista Banter.
The comments are property of their posters.