Welcome to Vista Banter. You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to ask questions and reply to others posts, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact support. |
|
Hardware and Windows Vista Hardware issues in relation to Windows Vista. (microsoft.public.windows.vista.hardware_devices) |
|
LinkBack | Thread Tools | Display Modes |
|
|
|||
VG2230wm not displaying after windows start
Hi, this has been an ongoing problem since I got the monitor and I have had
no luck at my graphics card website and monitor website. My system specs: Vista Home Basic 64x (Version: 6.0.6001 Service Pack 1 Build 6001) AM2 Fatal1ty moherboard Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+, 3200 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date: Phoenix Technologies, LTD 6.00 PG, 7/31/2007 SMBIOS Version: 2.2 Graphics card: GeForce 8800 GTS eVGA driver version: 178.13 Monitor: ViewSonic VG2230wm 22'' Problem: System does not properly recognize the monitor on initial OS boot, the BIOS displays and the windows loading bar appears but right as the login is supposed to appear the monitor loses its signal. When I used my secondary monitor with this the system was recognizing my VG2230wm as (Default Monitor) but would not turn on even after clicking Attach. When I unplug and plug it back in the monitor correctly displays that it is a ViewSonic VG2230wm but has none of the correct resolutions, it only displays 800x600 and 1024x768. I have tried the drivers that came with the monitor, the newest ones from the website, (Which dont work, everytime I try to install the signed 64x monitor driver it says the monitor could not be found, same with unsigned drivers). I have tried installing the newest graphics card drivers and reverting to old ones where i knew the monitor had worked randomly before, but nothing now. I am stuck, i have tried flashing my BIOS to the new version, updating all my motherboard drivers. swapping ports during boot up process at different intervals. Pretty much everything I have thought of with the exception of formating my windows drive, I did that before and no dice the first time I saw this issue. I am assuming it is a graphics card driver issue or a windows vista 64x issue. Any Ideas? |
|
|||
VG2230wm not displaying after windows start
I also have a View sonic 2230 and I have no trouble getting it to display at
its native resolution with my Nvidia 8500GT card on Vista 32bit Home premium (SP1) using the 169.25 Nvidia drivers from the Nvidia Website. You might have to select "show all modes" in the Nvidia control panel in order to get the native resolution if it is not showing up. "Square" wrote in message ... Hi, this has been an ongoing problem since I got the monitor and I have had no luck at my graphics card website and monitor website. My system specs: Vista Home Basic 64x (Version: 6.0.6001 Service Pack 1 Build 6001) AM2 Fatal1ty moherboard Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+, 3200 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date: Phoenix Technologies, LTD 6.00 PG, 7/31/2007 SMBIOS Version: 2.2 Graphics card: GeForce 8800 GTS eVGA driver version: 178.13 Monitor: ViewSonic VG2230wm 22'' Problem: System does not properly recognize the monitor on initial OS boot, the BIOS displays and the windows loading bar appears but right as the login is supposed to appear the monitor loses its signal. When I used my secondary monitor with this the system was recognizing my VG2230wm as (Default Monitor) but would not turn on even after clicking Attach. When I unplug and plug it back in the monitor correctly displays that it is a ViewSonic VG2230wm but has none of the correct resolutions, it only displays 800x600 and 1024x768. I have tried the drivers that came with the monitor, the newest ones from the website, (Which dont work, everytime I try to install the signed 64x monitor driver it says the monitor could not be found, same with unsigned drivers). I have tried installing the newest graphics card drivers and reverting to old ones where i knew the monitor had worked randomly before, but nothing now. I am stuck, i have tried flashing my BIOS to the new version, updating all my motherboard drivers. swapping ports during boot up process at different intervals. Pretty much everything I have thought of with the exception of formating my windows drive, I did that before and no dice the first time I saw this issue. I am assuming it is a graphics card driver issue or a windows vista 64x issue. Any Ideas? |
|
|||
VG2230wm not displaying after windows start
I forgot to mention I have messed with literally everything in the Nvidia
control panel. Ive allowed all resolutions, and tried creating a custom resolution, every time it says custom test failed. I am 99% positive it is a problem with the computer not recognizing the monitor correctly, even though all the current drivers new and old have been tried for both the monitor and graphics card. I don't think its the monitor that is broken, it still turns on after unplugging and plugging in and displays everything fine, just none of the correct resolutions. "Curious" wrote: I also have a View sonic 2230 and I have no trouble getting it to display at its native resolution with my Nvidia 8500GT card on Vista 32bit Home premium (SP1) using the 169.25 Nvidia drivers from the Nvidia Website. You might have to select "show all modes" in the Nvidia control panel in order to get the native resolution if it is not showing up. "Square" wrote in message ... Hi, this has been an ongoing problem since I got the monitor and I have had no luck at my graphics card website and monitor website. My system specs: Vista Home Basic 64x (Version: 6.0.6001 Service Pack 1 Build 6001) AM2 Fatal1ty moherboard Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+, 3200 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date: Phoenix Technologies, LTD 6.00 PG, 7/31/2007 SMBIOS Version: 2.2 Graphics card: GeForce 8800 GTS eVGA driver version: 178.13 Monitor: ViewSonic VG2230wm 22'' Problem: System does not properly recognize the monitor on initial OS boot, the BIOS displays and the windows loading bar appears but right as the login is supposed to appear the monitor loses its signal. When I used my secondary monitor with this the system was recognizing my VG2230wm as (Default Monitor) but would not turn on even after clicking Attach. When I unplug and plug it back in the monitor correctly displays that it is a ViewSonic VG2230wm but has none of the correct resolutions, it only displays 800x600 and 1024x768. I have tried the drivers that came with the monitor, the newest ones from the website, (Which dont work, everytime I try to install the signed 64x monitor driver it says the monitor could not be found, same with unsigned drivers). I have tried installing the newest graphics card drivers and reverting to old ones where i knew the monitor had worked randomly before, but nothing now. I am stuck, i have tried flashing my BIOS to the new version, updating all my motherboard drivers. swapping ports during boot up process at different intervals. Pretty much everything I have thought of with the exception of formating my windows drive, I did that before and no dice the first time I saw this issue. I am assuming it is a graphics card driver issue or a windows vista 64x issue. Any Ideas? |
|
|||
I forgot to mention I have messed with literally everything in theNvidia
I am having the same problem with this monitor. If I unplug it and plug it back in it usually comes on. I have a Radion 1300 video card, usually have 2 monitors hooked up, and the smaller monitor is on vga. This comes on just fine, even if the VG 2230 is black.
On Wednesday, October 15, 2008 1:35 PM Squar wrote: Hi, this has been an ongoing problem since I got the monitor and I have had no luck at my graphics card website and monitor website. My system specs: Vista Home Basic 64x (Version: 6.0.6001 Service Pack 1 Build 6001) AM2 Fatal1ty moherboard Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+, 3200 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date: Phoenix Technologies, LTD 6.00 PG, 7/31/2007 SMBIOS Version: 2.2 Graphics card: GeForce 8800 GTS eVGA driver version: 178.13 Monitor: ViewSonic VG2230wm 22'' Problem: System does not properly recognize the monitor on initial OS boot, the BIOS displays and the windows loading bar appears but right as the login is supposed to appear the monitor loses its signal. When I used my secondary monitor with this the system was recognizing my VG2230wm as (Default Monitor) but would not turn on even after clicking Attach. When I unplug and plug it back in the monitor correctly displays that it is a ViewSonic VG2230wm but has none of the correct resolutions, it only displays 800x600 and 1024x768. I have tried the drivers that came with the monitor, the newest ones from the website, (Which dont work, everytime I try to install the signed 64x monitor driver it says the monitor could not be found, same with unsigned drivers). I have tried installing the newest graphics card drivers and reverting to old ones where i knew the monitor had worked randomly before, but nothing now. I am stuck, i have tried flashing my BIOS to the new version, updating all my motherboard drivers. swapping ports during boot up process at different intervals. Pretty much everything I have thought of with the exception of formating my windows drive, I did that before and no dice the first time I saw this issue. I am assuming it is a graphics card driver issue or a windows vista 64x issue. Any Ideas? On Wednesday, October 15, 2008 2:27 PM Curious wrote: I also have a View sonic 2230 and I have no trouble getting it to display at its native resolution with my Nvidia 8500GT card on Vista 32bit Home premium (SP1) using the 169.25 Nvidia drivers from the Nvidia Website. You might have to select "show all modes" in the Nvidia control panel in order to get the native resolution if it is not showing up. "Square" wrote in message ... On Wednesday, October 15, 2008 3:40 PM Squar wrote: I forgot to mention I have messed with literally everything in the Nvidia control panel. Ive allowed all resolutions, and tried creating a custom resolution, every time it says custom test failed. I am 99% positive it is a problem with the computer not recognizing the monitor correctly, even though all the current drivers new and old have been tried for both the monitor and graphics card. I don't think its the monitor that is broken, it still turns on after unplugging and plugging in and displays everything fine, just none of the correct resolutions. "Curious" wrote: Submitted via EggHeadCafe Microsoft ASP.NET For Beginners http://www.eggheadcafe.com/training-...NET/7/ASP.aspx |
Thread Tools | |
Display Modes | |
|
|