I have One Vista PC, one Vista notebook, one Windows Server 2003 PC and a
bunch of XP desktops and notebooks. All of the XP machines are SP3, the Vista
machines are SP1. The Vista notebook can share files and folders as expected
with any of the other machines in the workgroup. All the XP machines and the
Server 2003 PC can share as expected. However, the Vista PC cannot share any
files or folders with any other machine. It can share its printer just fine
with any machine as expected.

Of special note - prior to replacing all of the hard drives in this Vista
PC, I could share files and folders as expected. As each hard drive was
replaced, I lost the ability to share from that drive. I have tried removing
and then re-establishing shares with different share names, as well as
setting the permissions for Everyone to full control. No attempts to reset
the sharing have been successful. If I look at the share setting for any of
these drives, it looks as if any Vista or XP machine should be able to have
access. None do. The shares show up, but an Access Denied message greets any
attepmts to connect. This Vista machine can connect and access any machine in
the workgroup.

Have you assigned permissions in the Security tab? Or this search result may
help.
Vista Permission Issues
Mar 19, 2007 ... Post Posted: Fri Mar 02, 2007 5:14 am Post subject:
How to: check permissions using Vista icacls command, Reply with quote . ...
www.chicagotech.net/vista/vistapermission.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"David Sommers" wrote in message
...
I have One Vista PC, one Vista notebook, one Windows Server 2003 PC and a
bunch of XP desktops and notebooks. All of the XP machines are SP3, the
Vista
machines are SP1. The Vista notebook can share files and folders as
expected
with any of the other machines in the workgroup. All the XP machines and
the
Server 2003 PC can share as expected. However, the Vista PC cannot share
any
files or folders with any other machine. It can share its printer just
fine
with any machine as expected.

Of special note - prior to replacing all of the hard drives in this Vista
PC, I could share files and folders as expected. As each hard drive was
replaced, I lost the ability to share from that drive. I have tried
removing
and then re-establishing shares with different share names, as well as
setting the permissions for Everyone to full control. No attempts to reset
the sharing have been successful. If I look at the share setting for any
of
these drives, it looks as if any Vista or XP machine should be able to
have
access. None do. The shares show up, but an Access Denied message greets
any
attepmts to connect. This Vista machine can connect and access any machine
in
the workgroup.

Yes, I used the Security Tab to assign Everyone as Full Control, though I
shouldn't have to for reading, which is the default.

With XP, when I change the permissions, XP will go through all the files and
folders affected and set the permissions. This can take several minutes for a
large tree. With Vista, at least on this machine, changing permissions does
not result in any noticeable disk activity. Is that how it should be?

Bye.

"Robert L. (MS-MVP)" wrote:

Have you assigned permissions in the Security tab? Or this search result may
help.
Vista Permission Issues
Mar 19, 2007 ... Post Posted: Fri Mar 02, 2007 5:14 am Post subject:
How to: check permissions using Vista icacls command, Reply with quote . ...
www.chicagotech.net/vista/vistapermission.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"David Sommers" wrote in message
...
I have One Vista PC, one Vista notebook, one Windows Server 2003 PC and a
bunch of XP desktops and notebooks. All of the XP machines are SP3, the
Vista
machines are SP1. The Vista notebook can share files and folders as
expected
with any of the other machines in the workgroup. All the XP machines and
the
Server 2003 PC can share as expected. However, the Vista PC cannot share
any
files or folders with any other machine. It can share its printer just
fine
with any machine as expected.

Of special note - prior to replacing all of the hard drives in this Vista
PC, I could share files and folders as expected. As each hard drive was
replaced, I lost the ability to share from that drive. I have tried
removing
and then re-establishing shares with different share names, as well as
setting the permissions for Everyone to full control. No attempts to reset
the sharing have been successful. If I look at the share setting for any
of
these drives, it looks as if any Vista or XP machine should be able to
have
access. None do. The shares show up, but an Access Denied message greets
any
attepmts to connect. This Vista machine can connect and access any machine
in
the workgroup.

You may want to use icacls to check the permissions. Also do you have 3rd
party security software?
How to: check permissions using ...
How to: check permissions using Vista icacls command ... I want to
share my Vista D drive with the XP Pro and Win2K machines on my network. ...
http://www.chicagotech.net/netforums...21f994 3d18bd


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"David Sommers" wrote in message
...
Yes, I used the Security Tab to assign Everyone as Full Control, though I
shouldn't have to for reading, which is the default.

With XP, when I change the permissions, XP will go through all the files
and
folders affected and set the permissions. This can take several minutes
for a
large tree. With Vista, at least on this machine, changing permissions
does
not result in any noticeable disk activity. Is that how it should be?

Bye.

"Robert L. (MS-MVP)" wrote:

Have you assigned permissions in the Security tab? Or this search result
may
help.
Vista Permission Issues
Mar 19, 2007 ... Post Posted: Fri Mar 02, 2007 5:14 am Post
subject:
How to: check permissions using Vista icacls command, Reply with quote .
...
www.chicagotech.net/vista/vistapermission.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"David Sommers" wrote in message
...
I have One Vista PC, one Vista notebook, one Windows Server 2003 PC and
a
bunch of XP desktops and notebooks. All of the XP machines are SP3, the
Vista
machines are SP1. The Vista notebook can share files and folders as
expected
with any of the other machines in the workgroup. All the XP machines
and
the
Server 2003 PC can share as expected. However, the Vista PC cannot
share
any
files or folders with any other machine. It can share its printer just
fine
with any machine as expected.

Of special note - prior to replacing all of the hard drives in this
Vista
PC, I could share files and folders as expected. As each hard drive was
replaced, I lost the ability to share from that drive. I have tried
removing
and then re-establishing shares with different share names, as well as
setting the permissions for Everyone to full control. No attempts to
reset
the sharing have been successful. If I look at the share setting for
any
of
these drives, it looks as if any Vista or XP machine should be able to
have
access. None do. The shares show up, but an Access Denied message
greets
any
attepmts to connect. This Vista machine can connect and access any
machine
in
the workgroup.

I used icacls to inspect the permissions on the Vista PC and compare with
those on the Vista notebook that shares properly. From what I could
understand, the Vista PC had some permissions missing. There was no entry for
Everyone. In fact Everyone was missing from the standard Public folder. I
tried using icacls to add EveryoneF) to the permissions for Drive_V. There
was a fair amount of disk activity for some time. After it got quiet, I tried
to connect to the Vista PC from the Vista notebook. I was able to get down
one level of folders on the Drive_V share before I got an Access Denied
message. When I tried the same addition to Drive_P, it failed after some disk
activity saying the share name no longer existed. This was not actually the
case, the share was still there.

Of note: Drive_P and Drive_V are shares on two 1.5TB drives with less than
1TB of data each. Drive_P has many smallish files, while Drive_V has much
fewer, but larger files. It appears as if Vista doesn't fully traverse the
trees on these drives and sort of give up setting the permissions with no
error in one case and a bogus error in another.

What would you suggest now?

"Robert L. (MS-MVP)" wrote:


You may want to use icacls to check the permissions. Also do you have 3rd
party security software?
How to: check permissions using ...
How to: check permissions using Vista icacls command ... I want to
share my Vista D drive with the XP Pro and Win2K machines on my network. ...
http://www.chicagotech.net/netforums...21f994 3d18bd


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"David Sommers" wrote in message
...
Yes, I used the Security Tab to assign Everyone as Full Control, though I
shouldn't have to for reading, which is the default.

With XP, when I change the permissions, XP will go through all the files
and
folders affected and set the permissions. This can take several minutes
for a
large tree. With Vista, at least on this machine, changing permissions
does
not result in any noticeable disk activity. Is that how it should be?

Bye.

"Robert L. (MS-MVP)" wrote:

Have you assigned permissions in the Security tab? Or this search result
may
help.
Vista Permission Issues
Mar 19, 2007 ... Post Posted: Fri Mar 02, 2007 5:14 am Post
subject:
How to: check permissions using Vista icacls command, Reply with quote .
...
www.chicagotech.net/vista/vistapermission.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"David Sommers" wrote in message
...
I have One Vista PC, one Vista notebook, one Windows Server 2003 PC and
a
bunch of XP desktops and notebooks. All of the XP machines are SP3, the
Vista
machines are SP1. The Vista notebook can share files and folders as
expected
with any of the other machines in the workgroup. All the XP machines
and
the
Server 2003 PC can share as expected. However, the Vista PC cannot
share
any
files or folders with any other machine. It can share its printer just
fine
with any machine as expected.

Of special note - prior to replacing all of the hard drives in this
Vista
PC, I could share files and folders as expected. As each hard drive was
replaced, I lost the ability to share from that drive. I have tried
removing
and then re-establishing shares with different share names, as well as
setting the permissions for Everyone to full control. No attempts to
reset
the sharing have been successful. If I look at the share setting for
any
of
these drives, it looks as if any Vista or XP machine should be able to
have
access. None do. The shares show up, but an Access Denied message
greets
any
attepmts to connect. This Vista machine can connect and access any
machine
in
the workgroup.

We don't recommend to assign everyone to a root drive. Can try an account or
group? also please try to start the computer safe mode with network for
troubleshooting.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"David Sommers" wrote in message
...
I used icacls to inspect the permissions on the Vista PC and compare with
those on the Vista notebook that shares properly. From what I could
understand, the Vista PC had some permissions missing. There was no entry
for
Everyone. In fact Everyone was missing from the standard Public folder. I
tried using icacls to add EveryoneF) to the permissions for Drive_V.
There
was a fair amount of disk activity for some time. After it got quiet, I
tried
to connect to the Vista PC from the Vista notebook. I was able to get down
one level of folders on the Drive_V share before I got an Access Denied
message. When I tried the same addition to Drive_P, it failed after some
disk
activity saying the share name no longer existed. This was not actually
the
case, the share was still there.

Of note: Drive_P and Drive_V are shares on two 1.5TB drives with less than
1TB of data each. Drive_P has many smallish files, while Drive_V has much
fewer, but larger files. It appears as if Vista doesn't fully traverse the
trees on these drives and sort of give up setting the permissions with no
error in one case and a bogus error in another.

What would you suggest now?

"Robert L. (MS-MVP)" wrote:


You may want to use icacls to check the permissions. Also do you have 3rd
party security software?
How to: check permissions using ...
How to: check permissions using Vista icacls command ... I want to
share my Vista D drive with the XP Pro and Win2K machines on my network.
...

http://www.chicagotech.net/netforums...21f994 3d18bd


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"David Sommers" wrote in message
...
Yes, I used the Security Tab to assign Everyone as Full Control, though
I
shouldn't have to for reading, which is the default.

With XP, when I change the permissions, XP will go through all the
files
and
folders affected and set the permissions. This can take several minutes
for a
large tree. With Vista, at least on this machine, changing permissions
does
not result in any noticeable disk activity. Is that how it should be?

Bye.

"Robert L. (MS-MVP)" wrote:

Have you assigned permissions in the Security tab? Or this search
result
may
help.
Vista Permission Issues
Mar 19, 2007 ... Post Posted: Fri Mar 02, 2007 5:14 am Post
subject:
How to: check permissions using Vista icacls command, Reply with quote
.
...
www.chicagotech.net/vista/vistapermission.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"David Sommers" wrote in message
...
I have One Vista PC, one Vista notebook, one Windows Server 2003 PC
and
a
bunch of XP desktops and notebooks. All of the XP machines are SP3,
the
Vista
machines are SP1. The Vista notebook can share files and folders as
expected
with any of the other machines in the workgroup. All the XP machines
and
the
Server 2003 PC can share as expected. However, the Vista PC cannot
share
any
files or folders with any other machine. It can share its printer
just
fine
with any machine as expected.

Of special note - prior to replacing all of the hard drives in this
Vista
PC, I could share files and folders as expected. As each hard drive
was
replaced, I lost the ability to share from that drive. I have tried
removing
and then re-establishing shares with different share names, as well
as
setting the permissions for Everyone to full control. No attempts to
reset
the sharing have been successful. If I look at the share setting for
any
of
these drives, it looks as if any Vista or XP machine should be able
to
have
access. None do. The shares show up, but an Access Denied message
greets
any
attepmts to connect. This Vista machine can connect and access any
machine
in
the workgroup.