A Windows Vista forum. Vista Banter

Welcome to Vista Banter.

You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to ask questions and reply to others posts, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact support.

Go Back   Home » Vista Banter forum » Microsoft Windows Vista » Networking with Windows Vista
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Networking with Windows Vista Networking issues and questions with Windows Vista. (microsoft.public.windows.vista.networking_sharing)

Ethernet networking problem causes bluescreen



 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old February 2nd 09, 05:39 PM posted to microsoft.public.windows.vista.networking_sharing
bluescreenenemy
external usenet poster
 
Posts: 1
Default Ethernet networking problem causes bluescreen

Hello,
My Vista Ultimate Sp1 computer went bluescreen. After restarting, the
computer said bluescreen was caused by an "ethernet networking problem." I
followed the directions provided at
"http://wer.microsoft.com/responses/Response.aspx/13805/en-us/5.1.2600.0.00000000.9.9?SGD=ee5737ed-b626-4a1e-9acc-590ec50bfad0"
(Steps 1 & 2 revealed nothing.) I've come to step three and opened "Event
Viewer." In Event Viewer, it said "Fault bucket
0xD1_Rtlh86!MpHandleSendInterrupt+e1, type 0" under general tab for the
bluescreen event. Discussion pages at this site did not match with my fault
bucket. Here are some specs for my ethernet hub.
"Name [00000004] Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC
(NDIS 6.0)
Adapter Type Ethernet 802.3
Product Type Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Installed Yes
PNP Device ID PCI\VEN_10EC&DEV_8168&SUBSYS_365C1462&REV_01\10EC8 16800"

"Driver c:\windows\system32\drivers\rtlh86.sys (6.1837.926.2006, 43.50 KB
(44,544 bytes), 11/2/2006 5:25 AM)"


I hope someone can find a way to solve the problem.

  #2 (permalink)  
Old February 2nd 09, 05:54 PM posted to microsoft.public.windows.vista.networking_sharing
Jack \(MVP-Networking\).
external usenet poster
 
Posts: 551
Default Ethernet networking problem causes bluescreen

Hi
It seems that there is trouble with your Network card.
First log to Realtek support and look for the most recent drivers for the
RTL8168/8111
Then look at Windows Device Manger and Uninstall what every thing relate to
the Network card.
Reboot and install with the new drivers.
BTW. It would be also a good idea to apply the SP2 or SP3 upgrade to WinXP.
Jack (MS, MVP-Networking)

"bluescreenenemy" wrote in
message ...
Hello,
My Vista Ultimate Sp1 computer went bluescreen. After restarting, the
computer said bluescreen was caused by an "ethernet networking problem." I
followed the directions provided at
"http://wer.microsoft.com/responses/Response.aspx/13805/en-us/5.1.2600.0.00000000.9.9?SGD=ee5737ed-b626-4a1e-9acc-590ec50bfad0"
(Steps 1 & 2 revealed nothing.) I've come to step three and opened "Event
Viewer." In Event Viewer, it said "Fault bucket
0xD1_Rtlh86!MpHandleSendInterrupt+e1, type 0" under general tab for the
bluescreen event. Discussion pages at this site did not match with my
fault
bucket. Here are some specs for my ethernet hub.
"Name [00000004] Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC
(NDIS 6.0)
Adapter Type Ethernet 802.3
Product Type Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (NDIS
6.0)
Installed Yes
PNP Device ID PCI\VEN_10EC&DEV_8168&SUBSYS_365C1462&REV_01\10EC8 16800"

"Driver c:\windows\system32\drivers\rtlh86.sys (6.1837.926.2006, 43.50 KB
(44,544 bytes), 11/2/2006 5:25 AM)"


I hope someone can find a way to solve the problem.


  #3 (permalink)  
Old November 30th 09, 06:13 PM posted to microsoft.public.windows.vista.networking_sharing
BeefyDog
external usenet poster
 
Posts: 1
Default Ethernet networking problem causes bluescreen


Had the same issue here, but only when the NIC (by Realtek) was plugged
into a gigabit ethernet switch (the brand of switch did not matter).
BSOD every time even in safe mode. Moved cable to 10/100 switch - no
BSOD.
I've encountered problems with Realtek chips before (usually found on
cheap mobos or cheap NICs and it shows), so I usually replace NICs with
IntelPro's or something else more reliable. Anytime you see a "crab"
silkscreened on a VLSI chip, you can be assured it is crap.


--
BeefyDog
  #4 (permalink)  
Old January 12th 10, 10:41 AM posted to microsoft.public.windows.vista.networking_sharing
Chuck[_2_]
external usenet poster
 
Posts: 445
Default Ethernet networking problem causes bluescreen

There are millions of the Realtek based NICs out there. The great majority
work fine. It may be that some counterfeit chips are involved.
One issue can be that there is a driver version chip version mismatch. (New
chip version, older driver, or the opposite)
Automatic updates seem to be the leading cause of such mismatches.

As to the "same issue" -- since the thread is not showing, who knows what
the same issue actually is.

"BeefyDog" wrote in message
...

Had the same issue here, but only when the NIC (by Realtek) was plugged
into a gigabit ethernet switch (the brand of switch did not matter).
BSOD every time even in safe mode. Moved cable to 10/100 switch - no
BSOD.
I've encountered problems with Realtek chips before (usually found on
cheap mobos or cheap NICs and it shows), so I usually replace NICs with
IntelPro's or something else more reliable. Anytime you see a "crab"
silkscreened on a VLSI chip, you can be assured it is crap.


--
BeefyDog



  #5 (permalink)  
Old January 12th 10, 10:41 AM posted to microsoft.public.windows.vista.networking_sharing
Chuck[_2_]
external usenet poster
 
Posts: 445
Default Ethernet networking problem causes bluescreen

There are millions of the Realtek based NICs out there. The great majority
work fine. It may be that some counterfeit chips are involved.
One issue can be that there is a driver version chip version mismatch. (New
chip version, older driver, or the opposite)
Automatic updates seem to be the leading cause of such mismatches.

As to the "same issue" -- since the thread is not showing, who knows what
the same issue actually is.

"BeefyDog" wrote in message
...

Had the same issue here, but only when the NIC (by Realtek) was plugged
into a gigabit ethernet switch (the brand of switch did not matter).
BSOD every time even in safe mode. Moved cable to 10/100 switch - no
BSOD.
I've encountered problems with Realtek chips before (usually found on
cheap mobos or cheap NICs and it shows), so I usually replace NICs with
IntelPro's or something else more reliable. Anytime you see a "crab"
silkscreened on a VLSI chip, you can be assured it is crap.


--
BeefyDog



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 07:14 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.Search Engine Optimization by vBSEO 3.0.0 RC6
Copyright ©2004-2024 Vista Banter.
The comments are property of their posters.