I am running a small home network consisting of one desktop and two laptops
(all running Vista Home Premium). I want all three machine to have full
access to all files etc on each other. I remember that there was a way where
I could grant full access permission to "Everyone", but I've forgotten how.
Anybody refresh my memory please?

Brendan wrote:

I am running a small home network consisting of one desktop and two
laptops (all running Vista Home Premium). I want all three machine to have
full access to all files etc on each other. I remember that there was a
way where I could grant full access permission to "Everyone", but I've
forgotten how. Anybody refresh my memory please?

I believe you asked this yesterday in an XP newsgroup and I answered you
then. Here's the full answer one more time:

Here are general network troubleshooting steps. Not everything may be
applicable to your situation, so just take the bits that are. It may look
daunting, but if you follow the steps at the links and suggestions below
systematically and calmly, you will have no difficulty in setting up your
sharing.

Excellent, thorough, yet easy to understand article about File/Printer
Sharing in Vista. Includes details about sharing printers as well as files
and folders:

http://technet.microsoft.com/en-us/l.../bb727037.aspx

Problems sharing files between computers on a network are generally caused
by 1) a misconfigured firewall or overlooked firewall (including a stateful
firewall in a VPN); or 2) inadvertently running two firewalls such as the
built-in Windows Firewall and a third-party firewall; and/or 3) not having
identical user accounts and passwords on all Workgroup machines; 4) trying
to create shares where the operating system does not permit it.

A. Configure firewalls on all machines to allow the Local Area Network (LAN)
traffic as trusted. With Windows Firewall, this means allowing File/Printer
Sharing on the Exceptions tab. If you aren't running a third-party firewall
or have an antivirus/security program with its own firewall component, then
you're fine. With third-party firewalls, I usually configure the LAN
allowance with an IP range. Ex. would be 192.168.1.0-192.168.1.254.
Obviously you would substitute your correct subnet. Refer to any third
party security program's Help or user forums for how to properly configure
its firewall. Do not run more than one firewall. DO NOT TURN OFF FIREWALLS;
CONFIGURE THEM CORRECTLY.

B. For ease of organization, put all computers in the same Workgroup. This
is done from the System applet in Control Panel, Computer Name tab.

C. Create matching user accounts and passwords on all machines. You do not
need to be logged into the same account on all machines and the passwords
assigned to each user account can be different; the accounts/passwords just
need to exist and match on all machines. DO NOT NEGLECT TO CREATE
PASSWORDS, EVEN IF ONLY SIMPLE ONES. If you wish a machine to boot directly
to the Desktop (into one particular user's account) for convenience, you
can do this. The instructions at this link work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
http://www.elephantboycomputers.com/#FAQ

"Malke"
Thanks for your reply. I put this into XP by mistake and that's why I
couldn't find it.


"Malke" wrote in message
...
Brendan wrote:

I am running a small home network consisting of one desktop and two
laptops (all running Vista Home Premium). I want all three machine to
have
full access to all files etc on each other. I remember that there was a
way where I could grant full access permission to "Everyone", but I've
forgotten how. Anybody refresh my memory please?

I believe you asked this yesterday in an XP newsgroup and I answered you
then. Here's the full answer one more time:

Here are general network troubleshooting steps. Not everything may be
applicable to your situation, so just take the bits that are. It may look
daunting, but if you follow the steps at the links and suggestions below
systematically and calmly, you will have no difficulty in setting up your
sharing.

Excellent, thorough, yet easy to understand article about File/Printer
Sharing in Vista. Includes details about sharing printers as well as files
and folders:

http://technet.microsoft.com/en-us/l.../bb727037.aspx

Problems sharing files between computers on a network are generally caused
by 1) a misconfigured firewall or overlooked firewall (including a
stateful
firewall in a VPN); or 2) inadvertently running two firewalls such as the
built-in Windows Firewall and a third-party firewall; and/or 3) not having
identical user accounts and passwords on all Workgroup machines; 4) trying
to create shares where the operating system does not permit it.

A. Configure firewalls on all machines to allow the Local Area Network
(LAN)
traffic as trusted. With Windows Firewall, this means allowing
File/Printer
Sharing on the Exceptions tab. If you aren't running a third-party
firewall
or have an antivirus/security program with its own firewall component,
then
you're fine. With third-party firewalls, I usually configure the LAN
allowance with an IP range. Ex. would be 192.168.1.0-192.168.1.254.
Obviously you would substitute your correct subnet. Refer to any third
party security program's Help or user forums for how to properly configure
its firewall. Do not run more than one firewall. DO NOT TURN OFF
FIREWALLS;
CONFIGURE THEM CORRECTLY.

B. For ease of organization, put all computers in the same Workgroup. This
is done from the System applet in Control Panel, Computer Name tab.

C. Create matching user accounts and passwords on all machines. You do not
need to be logged into the same account on all machines and the passwords
assigned to each user account can be different; the accounts/passwords
just
need to exist and match on all machines. DO NOT NEGLECT TO CREATE
PASSWORDS, EVEN IF ONLY SIMPLE ONES. If you wish a machine to boot
directly
to the Desktop (into one particular user's account) for convenience, you
can do this. The instructions at this link work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
http://www.elephantboycomputers.com/#FAQ