Printer Error
Hi Friends, I am trying to install an application on vista 64 bit OS. Every time an error pops up and the application printer is not installed. Below is the error message:- "Operation could not be completed (error 0x00000704). The specified port is unknown." I have tried to google the error but all in vain. Any help will be appreciated. Thanks in advance, Harsimrat -- Harsimrat |
Printer Error
is this a 64bit application? If it's a 32bit application and it creates
it's own printer port, the port monitor software would need to be 64 bit. -- Alan Morris Windows Printing Team Search the Microsoft Knowledge Base he http://support.microsoft.com/search/?adv=1 This posting is provided "AS IS" with no warranties, and confers no rights. "Harsimrat" wrote in message ... Hi Friends, I am trying to install an application on vista 64 bit OS. Every time an error pops up and the application printer is not installed. Below is the error message:- "Operation could not be completed (error 0x00000704). The specified port is unknown." I have tried to google the error but all in vain. Any help will be appreciated. Thanks in advance, Harsimrat -- Harsimrat |
Printer Error
Harsimrat wrote on 06/25/2009 05:57 ET :
Hi Friends, I am trying to install an application on vista 64 bit OS. Every time an error pops up and the application printer is not installed. Below is the error message:- "Operation could not be completed (error 0x00000704). The specified port is unknown." I have tried to google the error but all in vain. Any help will be appreciated. Thanks in advance, Harsimrat Harsimrat I received the error: Operation could not be completed (error 0x00000704). The specified port is unknown. Installing my multifunction printer/scanner/fax. Specifically Brother MFC-440CN. My OS is Windows 7, x64. I'm installing it as a network printer on the IP address 192.168.1.69. I received this error during installation, twice. I allowed the installation to continue. After re-boot, I noticed my virtual fax printer was not there. Everything else seemed to work fine. I went to "Devices and Printers" and clicked "Add Printer". I allowed the default LPT1, then I selected "Windows Update" to get the latest goodies from MS. I found the Fax printer for Brother PC-FAX v.2.1, and added it. After that, I chose any printer and selected Printer Properties, then the tab "Ports". I clicked "Add Port", I selected standard TCPIP, and following thru, I entered my port as: 192.168.1.69. I opened the port for my Brother PC-FAX.v.2.1 and assigned it to IP the port I just added. I could not find a solution anywhere for this and the only suggestions made were re-install the OS. For a stable system other than this, I did not want to to do that and then re-install several thousand programs. During my research, I found MS making reference to a good print driver, PRINTER.DLL. That caused me to search for a driver and when I didn't find it anywhere on my system, I went and got one stumbling across one available from the Windows Update when I added my new printer. I planned to place that PRINTER.DLL file into the folder recommended my MS, but I found I didn't need to go that far. All I had to do was allow MS to offer up the printer I needed (after allowing the full printer install package to complete with the errors) and then assigning it to the TCPIP port found in my printer. If you have a similar 0x00000704 error, you may find this solution to apply to you. After months, my MFC-440CN works as advertized (as it had before I changed my registry) to default my "Program Files x(86)" and "Program Files" to default to drive "D". I don't know that my change to the registry had anything to do with this error, but I believe the key is finding a good driver from the Windows Update (by adding a printer) and finding a good driver to download, followed by assigning it the IP the printer has. I REALLY hope this helps someone avoid re-installing their OS. This was one hard puppy for me to fix. I would like to know if this helped you and if my post was worth while. |
Printer Error
суббота, 20 апреля 2013*г., 22:16:45 UTC+3 пользователь jackson написал:
Harsimrat wrote on 06/25/2009 05:57 ET : Hi Friends, I am trying to install an application on vista 64 bit OS. Every time an error pops up and the application printer is not installed. Below is the error message:- "Operation could not be completed (error 0x00000704). The specified port is unknown." I have tried to google the error but all in vain. Any help will be appreciated. Thanks in advance, Harsimrat Harsimrat I received the error: Operation could not be completed (error 0x00000704). The specified port is unknown. Installing my multifunction printer/scanner/fax. Specifically Brother MFC-440CN. My OS is Windows 7, x64. I'm installing it as a network printer on the IP address 192.168.1.69. I received this error during installation, twice. I allowed the installation to continue. After re-boot, I noticed my virtual fax printer was not there. Everything else seemed to work fine. I went to "Devices and Printers" and clicked "Add Printer". I allowed the default LPT1, then I selected "Windows Update" to get the latest goodies from MS. I found the Fax printer for Brother PC-FAX v.2.1, and added it. After that, I chose any printer and selected Printer Properties, then the tab "Ports". I clicked "Add Port", I selected standard TCPIP, and following thru, I entered my port as: 192.168.1.69. I opened the port for my Brother PC-FAX.v.2.1 and assigned it to IP the port I just added. I could not find a solution anywhere for this and the only suggestions made were re-install the OS. For a stable system other than this, I did not want to to do that and then re-install several thousand programs. During my research, I found MS making reference to a good print driver, PRINTER.DLL. That caused me to search for a driver and when I didn't find it anywhere on my system, I went and got one stumbling across one available from the Windows Update when I added my new printer. I planned to place that PRINTER.DLL file into the folder recommended my MS, but I found I didn't need to go that far. All I had to do was allow MS to offer up the printer I needed (after allowing the full printer install package to complete with the errors) and then assigning it to the TCPIP port found in my printer. If you have a similar 0x00000704 error, you may find this solution to apply to you. After months, my MFC-440CN works as advertized (as it had before I changed my registry) to default my "Program Files x(86)" and "Program Files" to default to drive "D". I don't know that my change to the registry had anything to do with this error, but I believe the key is finding a good driver from the Windows Update (by adding a printer) and finding a good driver to download, followed by assigning it the IP the printer has. I REALLY hope this helps someone avoid re-installing their OS. This was one hard puppy for me to fix. I would like to know if this helped you and if my post was worth while. Thanks man. I had the same problem, and now it is solved) Andrew, http://letsunlockiphone5.com/ - IT stuff |
Printer Error
I know that this is an old thread, but it comes up when searching the web for the solution.
Anyway, what worked for me with Brother MFD connected to wi-fi is adding the TCP/IP port with the IP address of the device using the Printer Management PRIOR to starting the Brother driver installation wizard. So just open Printer Management go to your Local Server Ports Add Standard TCP/IP Port enter the IP address of the device, and after that install the drivers. |
All times are GMT. The time now is 03:22 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.0.0 RC6
Copyright 2004-2006 VistaBanter.com