Found this on-line here
http://www.vistax64.com/vista-genera...r-corrupt.html :

"I solved my problems by doing a Google search for the words.
I then used windows explorer to navigate to
C:/Windows/System32/Tasks/Microsoft/Media Centre
and deleted mcupdate.
I don't know why this task was not visible in Task Scheduler but the above
procedure seems to have worked."

Instead of deleting it, try renaming it first and see what happens.

I think if you try to run something that interferes with the other, it
probably will not run and leave an error in the log file. Don't know for
sure; I've never run into that problem.

SC Tom



David
"DirtyDawg" wrote in message
...
Ah Oh,

I went to my other machine (Desktop Vista Home Premium 32b) went through
the
same procedure to get into the Task Scheduler and as soon as it loads up I
get a rectangular box, from Task Scheduler, saying "The task image is
corrupt
or has been tampered with.mcupdate". However I can just click ok to that
message and still get into it and see that the manual running of DD by me
was
successful, so I don't know what is up there. Is there a way to fix this
error message by doing something on my own? Possibly just deleting the
current Tasks or something and then re-entering them? Thanks.


"DirtyDawg" wrote:

Hello SC Tom, thanks for replying to another one of my topics here.


I got into the scheduler like you described and found that there are
multiple arguments in there already, one of which is the -i that you
mentioned. However there are two others that are not in the help file
either
and would like to know if you know what they represent as well? They
are -e
and -g.


I ask this because if I try to use the -f force switch and something else
like -w for a full fragmentation, and one of these other arguments is
something that is the oposite, well you know where I'm going with this
right.
Anyway, thanks again for the reply, and hope to hear from you again
soon.

"SC Tom" wrote:


"DirtyDawg" wrote in message
news I was under the impression for quite some time now that when you run
Disk
Defrag on the schedule that it actually defrags the drive when you
tell it
to. Now it seems that it really doesn't, it just goes out and checks
to
see
if IT THINKS IT NEEDS IT, and then goes from there. Because of
starting
to
use my systems sleep mode more often, I've found it necessary to run
DD
manually and it seems like to me that it hasn't defraged the drive AT
ALL
this last YEAR and 1/2. I say this because defrag has been running
for 2
hours now and is still going. I'm assuming that it is because it has
never
really defragged my drive at all. Is my assumption correct? How
would a
person go about checking that the drive has actually been defragged
or
not?
I mean really defragged, not the program defrag deciding one way or
the
other. Thanks.

Here are your options for defrag:

"Description: Locates and consolidates fragmented files on local
volumes to
improve system performance.

Syntax: defrag volume -a [-v]
defrag volume [{-r | -w}] [-f] [-v]
defrag -c [{-r | -w}] [-f] [-v]

Parameters:

Value Description
volume Specifies the drive letter or mount point path of the
volume
to
be defragmented or analyzed.

-c Defragments all volumes on this computer.

-a Performs fragmentation analysis only.

-r Performs partial defragmentation (default). Attempts to
consolidate only fragments smaller than 64 megabytes
(MB).

-w Performs full defragmentation. Attempts to consolidate
all
file
fragments, regardless of their size.

-f Forces defragmentation of the volume when free space is
low.

-v Specifies verbose mode. The defragmentation and analysis
output
is more detailed.

-? Displays this help information."

If you go into Task Scheduler/ Scheduled Tasks/ Windows/ Disk Defrag,
highlight ScheduledDefrag and click Properties in the RH pane, it'll
bring
it up for editing. Under Actions, click on Edit. On the Add arguments
(optional) line, add -f and see if that will force it for you. (Though
it's
not listed in the help screen, -i makes defrag run in the background.)

SC Tom

Thanks for that SC Tom.


I'm not sure why I didn't think of googling it myself. Oh well, that's what
happens when you get old (lazy and forgetful) . The only thing I can think
of related to Media Center is that I have 1 program set to record every week.
That must be it. I'll probably just delete that series recording option in
WM and forget about watching that weekly. It's not that important to me
anyway. Thanks again, and I hope you enjoy the rest of your weekend. I'm
looking forward to watching some football later.

"SC Tom" wrote:

Found this on-line here
http://www.vistax64.com/vista-genera...r-corrupt.html :

"I solved my problems by doing a Google search for the words.
I then used windows explorer to navigate to
C:/Windows/System32/Tasks/Microsoft/Media Centre
and deleted mcupdate.
I don't know why this task was not visible in Task Scheduler but the above
procedure seems to have worked."

Instead of deleting it, try renaming it first and see what happens.

I think if you try to run something that interferes with the other, it
probably will not run and leave an error in the log file. Don't know for
sure; I've never run into that problem.

SC Tom



David
"DirtyDawg" wrote in message
...
Ah Oh,

I went to my other machine (Desktop Vista Home Premium 32b) went through
the
same procedure to get into the Task Scheduler and as soon as it loads up I
get a rectangular box, from Task Scheduler, saying "The task image is
corrupt
or has been tampered with.mcupdate". However I can just click ok to that
message and still get into it and see that the manual running of DD by me
was
successful, so I don't know what is up there. Is there a way to fix this
error message by doing something on my own? Possibly just deleting the
current Tasks or something and then re-entering them? Thanks.


"DirtyDawg" wrote:

Hello SC Tom, thanks for replying to another one of my topics here.


I got into the scheduler like you described and found that there are
multiple arguments in there already, one of which is the -i that you
mentioned. However there are two others that are not in the help file
either
and would like to know if you know what they represent as well? They
are -e
and -g.


I ask this because if I try to use the -f force switch and something else
like -w for a full fragmentation, and one of these other arguments is
something that is the oposite, well you know where I'm going with this
right.
Anyway, thanks again for the reply, and hope to hear from you again
soon.

"SC Tom" wrote:


"DirtyDawg" wrote in message
news I was under the impression for quite some time now that when you run
Disk
Defrag on the schedule that it actually defrags the drive when you
tell it
to. Now it seems that it really doesn't, it just goes out and checks
to
see
if IT THINKS IT NEEDS IT, and then goes from there. Because of
starting
to
use my systems sleep mode more often, I've found it necessary to run
DD
manually and it seems like to me that it hasn't defraged the drive AT
ALL
this last YEAR and 1/2. I say this because defrag has been running
for 2
hours now and is still going. I'm assuming that it is because it has
never
really defragged my drive at all. Is my assumption correct? How
would a
person go about checking that the drive has actually been defragged
or
not?
I mean really defragged, not the program defrag deciding one way or
the
other. Thanks.

Here are your options for defrag:

"Description: Locates and consolidates fragmented files on local
volumes to
improve system performance.

Syntax: defrag volume -a [-v]
defrag volume [{-r | -w}] [-f] [-v]
defrag -c [{-r | -w}] [-f] [-v]

Parameters:

Value Description
volume Specifies the drive letter or mount point path of the
volume
to
be defragmented or analyzed.

-c Defragments all volumes on this computer.

-a Performs fragmentation analysis only.

-r Performs partial defragmentation (default). Attempts to
consolidate only fragments smaller than 64 megabytes
(MB).

-w Performs full defragmentation. Attempts to consolidate
all
file
fragments, regardless of their size.

-f Forces defragmentation of the volume when free space is
low.

-v Specifies verbose mode. The defragmentation and analysis
output
is more detailed.

-? Displays this help information."

If you go into Task Scheduler/ Scheduled Tasks/ Windows/ Disk Defrag,
highlight ScheduledDefrag and click Properties in the RH pane, it'll
bring
it up for editing. Under Actions, click on Edit. On the Add arguments
(optional) line, add -f and see if that will force it for you. (Though
it's
not listed in the help screen, -i makes defrag run in the background.)

SC Tom

Thanks for that SC Tom.


I'm not sure why I didn't think of googling it myself. Oh well, that's what
happens when you get old (lazy and forgetful) . The only thing I can think
of related to Media Center is that I have 1 program set to record every week.
That must be it. I'll probably just delete that series recording option in
WM and forget about watching that weekly. It's not that important to me
anyway. Thanks again, and I hope you enjoy the rest of your weekend. I'm
looking forward to watching some football later.

"SC Tom" wrote:

Found this on-line here
http://www.vistax64.com/vista-genera...r-corrupt.html :

"I solved my problems by doing a Google search for the words.
I then used windows explorer to navigate to
C:/Windows/System32/Tasks/Microsoft/Media Centre
and deleted mcupdate.
I don't know why this task was not visible in Task Scheduler but the above
procedure seems to have worked."

Instead of deleting it, try renaming it first and see what happens.

I think if you try to run something that interferes with the other, it
probably will not run and leave an error in the log file. Don't know for
sure; I've never run into that problem.

SC Tom



David
"DirtyDawg" wrote in message
...
Ah Oh,

I went to my other machine (Desktop Vista Home Premium 32b) went through
the
same procedure to get into the Task Scheduler and as soon as it loads up I
get a rectangular box, from Task Scheduler, saying "The task image is
corrupt
or has been tampered with.mcupdate". However I can just click ok to that
message and still get into it and see that the manual running of DD by me
was
successful, so I don't know what is up there. Is there a way to fix this
error message by doing something on my own? Possibly just deleting the
current Tasks or something and then re-entering them? Thanks.


"DirtyDawg" wrote:

Hello SC Tom, thanks for replying to another one of my topics here.


I got into the scheduler like you described and found that there are
multiple arguments in there already, one of which is the -i that you
mentioned. However there are two others that are not in the help file
either
and would like to know if you know what they represent as well? They
are -e
and -g.


I ask this because if I try to use the -f force switch and something else
like -w for a full fragmentation, and one of these other arguments is
something that is the oposite, well you know where I'm going with this
right.
Anyway, thanks again for the reply, and hope to hear from you again
soon.

"SC Tom" wrote:


"DirtyDawg" wrote in message
news I was under the impression for quite some time now that when you run
Disk
Defrag on the schedule that it actually defrags the drive when you
tell it
to. Now it seems that it really doesn't, it just goes out and checks
to
see
if IT THINKS IT NEEDS IT, and then goes from there. Because of
starting
to
use my systems sleep mode more often, I've found it necessary to run
DD
manually and it seems like to me that it hasn't defraged the drive AT
ALL
this last YEAR and 1/2. I say this because defrag has been running
for 2
hours now and is still going. I'm assuming that it is because it has
never
really defragged my drive at all. Is my assumption correct? How
would a
person go about checking that the drive has actually been defragged
or
not?
I mean really defragged, not the program defrag deciding one way or
the
other. Thanks.

Here are your options for defrag:

"Description: Locates and consolidates fragmented files on local
volumes to
improve system performance.

Syntax: defrag volume -a [-v]
defrag volume [{-r | -w}] [-f] [-v]
defrag -c [{-r | -w}] [-f] [-v]

Parameters:

Value Description
volume Specifies the drive letter or mount point path of the
volume
to
be defragmented or analyzed.

-c Defragments all volumes on this computer.

-a Performs fragmentation analysis only.

-r Performs partial defragmentation (default). Attempts to
consolidate only fragments smaller than 64 megabytes
(MB).

-w Performs full defragmentation. Attempts to consolidate
all
file
fragments, regardless of their size.

-f Forces defragmentation of the volume when free space is
low.

-v Specifies verbose mode. The defragmentation and analysis
output
is more detailed.

-? Displays this help information."

If you go into Task Scheduler/ Scheduled Tasks/ Windows/ Disk Defrag,
highlight ScheduledDefrag and click Properties in the RH pane, it'll
bring
it up for editing. Under Actions, click on Edit. On the Add arguments
(optional) line, add -f and see if that will force it for you. (Though
it's
not listed in the help screen, -i makes defrag run in the background.)

SC Tom