Hello, Despues to obtain that "Vista Windows x86 and x64" recognized my SCSI
this sees that 5p has a connected device concretely is a "HP Scanjet" and
identifies it like "HP C5110A SCSI Processor Device", gustaria know to me if
somebody has been able to make work and mount drivers for this device of
which, at the moment I do not want to undo.

Vista has seen my HP sj5300C (older scanner) and it actually worked for a
while a few builds ago. HP is not going to make Vista drivers fo this
scanner, and I looked up your scanner's driver and they make no mention of a
Vista driver.

http://h10025.www1.hp.com/ewfrf/wc/s...lang=en&cc=us#

Obviously they want to sell you a new scanner.

We've had suggestion that a Vuescan .inf file could work for some of these
HP Scanners along with a Vuescan driver, but it didn't work for me. The
Vista Print team told me to go look for a TWAIN DS driver, but I have yet to
find one.

CH

"Carlos Sánchez" wrote in message
...
Hello, Despues to obtain that "Vista Windows x86 and x64" recognized my
SCSI this sees that 5p has a connected device concretely is a "HP Scanjet"
and identifies it like "HP C5110A SCSI Processor Device", gustaria know to
me if somebody has been able to make work and mount drivers for this
device of which, at the moment I do not want to undo.

In article , Chad Harris wrote:
The*Vista Print team told me to go look for a TWAIN DS driver, but I have yet
to* find one.

See my several messages including the one here about using Deskscan 2.9 which
uses TWAIN.

Thanks--Interesting--- I'll give all of them a shot. Dev Mgmt says I have
the 5300C in and it's working fine, but of course Device Manager would say
that if you stuffed a grapefruit into your pc. It hasn't been reliable for
driver health since it was released August 25, 1995 and they aren't getting
off their butts to correct it anytime this side or the other side of
Vienna/Blackcomb.

I appreciate the info Hugh.

CH


"Hugh Wyn Griffith" wrote in message
...
In article , Chad Harris wrote:
The Vista Print team told me to go look for a TWAIN DS driver, but I have
yet
to find one.

See my several messages including the one here about using Deskscan 2.9
which
uses TWAIN.

I look forward to hearing the outcome -- many are intersted g

I using an HP 6100c SCSI ( Adaptec 19160N ), basically same as an HP4c,
this scanner is 10 years old or older.I'm using Deskscan 2.9. Also about 10
years old . Works great.
You can still download Deskscan from HP site.

Doug

"Carlos Sánchez" wrote in message
...
Hello, Despues to obtain that "Vista Windows x86 and x64" recognized my
SCSI this sees that 5p has a connected device concretely is a "HP Scanjet"
and identifies it like "HP C5110A SCSI Processor Device", gustaria know to
me if somebody has been able to make work and mount drivers for this
device of which, at the moment I do not want to undo.

Bingo -- me too g

I have one client who is 'married' to his old SCSI based scanner -- I
mean way old, the controller is a 2902. The reason is that his scanner
has an effective page feeder and he knows a new scanner with a good
page feeder will set him back $300 or more.


--
Barry Schnur

As long as it works and has the definition you need .....

As long as it works and has the definition you need .....

It does for him. As for our home setup, the scanner is getting and
lame (runs ok under Win2K), but it will be one of the relatively low
cost upgrades we do before moving on to Vista on one or two productions
systems.

That being said, we may hold off on the primary systems -- we pretty
much have to until we retire the NetWare 4.2 server.

--
Barry Schnur