A Windows Vista forum. Vista Banter

Welcome to Vista Banter.

You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to ask questions and reply to others posts, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact support.

Go Back   Home » Vista Banter forum » Microsoft Windows Vista » Hardware and Windows Vista
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Hardware and Windows Vista Hardware issues in relation to Windows Vista. (microsoft.public.windows.vista.hardware_devices)

=4GB ram=3d display problems with nvida based video card



 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old April 14th 07, 03:00 PM posted to microsoft.public.windows.vista.hardware_devices
Ward Taylor
external usenet poster
 
Posts: 17
Default =4GB ram=3d display problems with nvida based video card

Good Day
After upgrading my system from 2GB to 4GB of ram, I am having problems
with applications that display anything in 3d. This includes unreal
tournament as well as the built-in vista "media center" and aero. I do
not run with aero enabled, but tried it just as a test. After a reboot,
I can load an application that uses 3d once, and it will work fine, game
plays great, or I can watch a dvd. Upon trying to load a 3d application
again, the frame rate is abysmal, 1 frame per second. This then also
affects 2d apps, they do not refresh areas of the screen in a timely
fashion. This happens with both the builtin vista drivers for my
graphics card and the latest 101.41 from nvidia. Dxdiag reports that my
video card has 487mb approx total memory, when it actually has 128mb
onboard, and the agp aperture size is also set to 128mb Other than this,
the system runs great. I am thinking that this is a driver issue, but
was wondering if anyone else had a similar experience or know of a work
around.
System specs:
Tyan 2875 m/b
2 opteron 246
4 gb ram
Gigabyte 6800 based agp video card w/128mb
Windows vista ultimate x64
Thank you for any and all replies
  #2 (permalink)  
Old April 14th 07, 07:20 PM posted to microsoft.public.windows.vista.hardware_devices
LarryC
external usenet poster
 
Posts: 37
Default =4GB ram=3d display problems with nvida based video card

Things to check.

Make sure your BIOS is the latest and that the BIOS settings are correct.

Make sure your memory is not defective. Even though they are new and it
boots up doesn't mean that your new RAM is not defective. Make sure all your
memory are of the same brand and make.

Check your power supply. Just because it turns on doesn't mean your power
supply is giving out proper voltages.

Best advice I could make though is to call your Motherboard manufacturer for
tech support or visit their user forum. I don't think it is a Vista problem
but hardware issues. You might want to double check the Vista hardware
compatiblity list to make sure your components are Vista certified. If not,
your just beta testing your hardware.



"Ward Taylor" wrote:

Good Day
After upgrading my system from 2GB to 4GB of ram, I am having problems
with applications that display anything in 3d. This includes unreal
tournament as well as the built-in vista "media center" and aero. I do
not run with aero enabled, but tried it just as a test. After a reboot,
I can load an application that uses 3d once, and it will work fine, game
plays great, or I can watch a dvd. Upon trying to load a 3d application
again, the frame rate is abysmal, 1 frame per second. This then also
affects 2d apps, they do not refresh areas of the screen in a timely
fashion. This happens with both the builtin vista drivers for my
graphics card and the latest 101.41 from nvidia. Dxdiag reports that my
video card has 487mb approx total memory, when it actually has 128mb
onboard, and the agp aperture size is also set to 128mb Other than this,
the system runs great. I am thinking that this is a driver issue, but
was wondering if anyone else had a similar experience or know of a work
around.
System specs:
Tyan 2875 m/b
2 opteron 246
4 gb ram
Gigabyte 6800 based agp video card w/128mb
Windows vista ultimate x64
Thank you for any and all replies

  #3 (permalink)  
Old April 14th 07, 08:21 PM posted to microsoft.public.windows.vista.hardware_devices
JW
external usenet poster
 
Posts: 1,021
Default =4GB ram=3d display problems with nvida based video card

The KB article in the following link may prove helpfull:

http://support.microsoft.com/kb/929605/en-us

If you are using DDR2 memory are you using 4 Dimms or 3. With some MOBOs
Vista does not seem to like the fact that all memory is not running at the
same speed if you are using an odd number of DDR2 dimms.

"LarryC" wrote in message
...
Things to check.

Make sure your BIOS is the latest and that the BIOS settings are correct.

Make sure your memory is not defective. Even though they are new and it
boots up doesn't mean that your new RAM is not defective. Make sure all
your
memory are of the same brand and make.

Check your power supply. Just because it turns on doesn't mean your power
supply is giving out proper voltages.

Best advice I could make though is to call your Motherboard manufacturer
for
tech support or visit their user forum. I don't think it is a Vista
problem
but hardware issues. You might want to double check the Vista hardware
compatiblity list to make sure your components are Vista certified. If
not,
your just beta testing your hardware.



"Ward Taylor" wrote:

Good Day
After upgrading my system from 2GB to 4GB of ram, I am having problems
with applications that display anything in 3d. This includes unreal
tournament as well as the built-in vista "media center" and aero. I do
not run with aero enabled, but tried it just as a test. After a reboot,
I can load an application that uses 3d once, and it will work fine, game
plays great, or I can watch a dvd. Upon trying to load a 3d application
again, the frame rate is abysmal, 1 frame per second. This then also
affects 2d apps, they do not refresh areas of the screen in a timely
fashion. This happens with both the builtin vista drivers for my
graphics card and the latest 101.41 from nvidia. Dxdiag reports that my
video card has 487mb approx total memory, when it actually has 128mb
onboard, and the agp aperture size is also set to 128mb Other than this,
the system runs great. I am thinking that this is a driver issue, but
was wondering if anyone else had a similar experience or know of a work
around.
System specs:
Tyan 2875 m/b
2 opteron 246
4 gb ram
Gigabyte 6800 based agp video card w/128mb
Windows vista ultimate x64
Thank you for any and all replies



  #4 (permalink)  
Old April 15th 07, 03:51 AM posted to microsoft.public.windows.vista.hardware_devices
Ward Taylor
external usenet poster
 
Posts: 17
Default =4GB ram=3d display problems with nvida based video card

Hi
Thanks for your input. The correct amount of ram is displayed in
windows and in the bios, just not the correct amount of ram on the video
card displayed in dxdiag. I have run memtest86, it reports no problems.
The system is up 24/7 running boinc and I never have any crashes. I
do not think that it is a hardware problem.
Thanks
  #5 (permalink)  
Old April 15th 07, 02:21 PM posted to microsoft.public.windows.vista.hardware_devices
JW
external usenet poster
 
Posts: 1,021
Default =4GB ram=3d display problems with nvida based video card

There is no problem and none of your real memory is being used by the video
card.
What you are seing is the total address space allocated to the video card
and not the actual memory on the card. This is discussed in the link I
provided you.

"Ward Taylor" wrote in message
...
Hi
Thanks for your input. The correct amount of ram is displayed in windows
and in the bios, just not the correct amount of ram on the video card
displayed in dxdiag. I have run memtest86, it reports no problems. The
system is up 24/7 running boinc and I never have any crashes. I do not
think that it is a hardware problem.
Thanks



  #6 (permalink)  
Old April 15th 07, 02:36 PM posted to microsoft.public.windows.vista.hardware_devices
Ward Taylor
external usenet poster
 
Posts: 17
Default =4GB ram=3d display problems with nvida based video card

Through further troubleshooting, I have determined that a 3d app will
load and perform properly *before* vista's superfetch has completed
filling ram with it's cache, once it stops and the free ram is near 0 3d
apps don't work. I can duplicate this by loading an app that takes a
large amount of memory like a vmware virtual machine and then closing
it, before superfetch has finished repopulating the ram, a 3d app will
load and perform properly. I am thinking that either my bios(latest
version for this board), vista, or a driver is not properly handling the
software memory remapping feature.
Cheers

JW wrote:
There is no problem and none of your real memory is being used by the video
card.
What you are seing is the total address space allocated to the video card
and not the actual memory on the card. This is discussed in the link I
provided you.

"Ward Taylor" wrote in message
...
Hi
Thanks for your input. The correct amount of ram is displayed in windows
and in the bios, just not the correct amount of ram on the video card
displayed in dxdiag. I have run memtest86, it reports no problems. The
system is up 24/7 running boinc and I never have any crashes. I do not
think that it is a hardware problem.
Thanks



  #7 (permalink)  
Old April 15th 07, 04:03 PM posted to microsoft.public.windows.vista.hardware_devices
Cal Bear '66
external usenet poster
 
Posts: 3,324
Default =4GB ram=3d display problems with nvida based video card

I have 4GB of memory and an nVidia 7600 GS video card.
My RAM usage rarely tops out at 34% usage (Vista x86),
even with 3D games.


"Ward Taylor" wrote in message ...
Hi
Thanks for your input. The correct amount of ram is displayed in
windows and in the bios, just not the correct amount of ram on the video
card displayed in dxdiag. I have run memtest86, it reports no problems.
The system is up 24/7 running boinc and I never have any crashes. I
do not think that it is a hardware problem.
Thanks

  #8 (permalink)  
Old April 26th 07, 02:44 PM posted to microsoft.public.windows.vista.hardware_devices
Howiepoohs
external usenet poster
 
Posts: 11
Default =4GB ram=3d display problems with nvida based video card



"Ward Taylor" wrote:

Good Day
After upgrading my system from 2GB to 4GB of ram, I am having problems
with applications that display anything in 3d. This includes unreal
tournament as well as the built-in vista "media center" and aero. I do
not run with aero enabled, but tried it just as a test. After a reboot,
I can load an application that uses 3d once, and it will work fine, game
plays great, or I can watch a dvd. Upon trying to load a 3d application
again, the frame rate is abysmal, 1 frame per second. This then also
affects 2d apps, they do not refresh areas of the screen in a timely
fashion. This happens with both the builtin vista drivers for my
graphics card and the latest 101.41 from nvidia. Dxdiag reports that my
video card has 487mb approx total memory, when it actually has 128mb
onboard, and the agp aperture size is also set to 128mb Other than this,
the system runs great. I am thinking that this is a driver issue, but
was wondering if anyone else had a similar experience or know of a work
around.
System specs:
Tyan 2875 m/b
2 opteron 246
4 gb ram
Gigabyte 6800 based agp video card w/128mb
Windows vista ultimate x64
Thank you for any and all replies


I have exactly the same issue with Vista 64 bit and 4 gb of ram. If I am
using 2.75 gb (an odd mix of ram sticks) Vista is stable as anything, when I
add two indenticle modules, so I am running 4*1gb sticks, all same model
numbers, checked with Memtest86 to be ok, but I get the same issues as you,
slow 3d apps such as games, slow and jerky aero interface and some
instability. I want to get to the bottom of this as its been a pain for about
a week since I bought the memory.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 01:11 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.Search Engine Optimization by vBSEO 3.0.0 RC6
Copyright ©2004-2024 Vista Banter.
The comments are property of their posters.