View Single Post
  #7 (permalink)  
Old April 2nd 08, 11:28 AM posted to microsoft.public.windows.vista.networking_sharing
Alex Zamfir[_2_]
external usenet poster
 
Posts: 3
Default Unauthenticated Network?

Thanks again for the reply Robert.

IPv6 is disabled. Same error. The chicagotech post didn't help either. Any
other ideeas? Thanks a lot in advance.



"Robert L. (MS-MVP)" wrote:

Try to disable IPv6 if you haven't done so. Or check this post. Please post
back with the result.

Make sure that only one network adapter is enabled
http://chicagotech.net/netforums/viewtopic.php?t=3583

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Alex Zamfir" wrote in message
...
Thanks very much for the reply Robert. I did all that you suggested and
now
when trying to use the client deployment tools I get the following error:

"Make sure that only one network adapter is enabled and that is connected
to
the Small Business Server"

The clients are connected via wireless to the server and there is only one
connection active (the wireless one).

Thanks in advance for any new suggestions.



"Robert L. (MS-MVP)" wrote:

We have seen many cases like this one. Try this:

1. Remove the Vista from the domain.
2. Install MS update KB926505. or check this post.

Solved: Vista can't join the SBS ...Also. when trying to join SBS 2003
using
client deployment tools, you may receive this message: The Small Business
Server Networking Wizard was not ...
http://www.chicagotech.net/netforums...opic.php?t=264

3. Rejoin the domain.

Please post back with the result.


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Alex Zamfir" Alex wrote in message
news I have the same problem but the solution that worked for you Bob didn't
for
me. Any other suggestions guys? And there is loss of functionality. The
firewall profile detected is not "domain" but "public" and the group
policy
firewall settings are not in effect. That means I cannot connect to the
workstation via remote desktop and other such issues.

Any advice will be greatly appreciated.

Alex.


"BobP" wrote:

Problem Solved!

Solution was to unjoin the workstation from the domain, reset the
secure channel, then rejoining the workstation back to the domain


On Fri, 22 Feb 2008 07:46:20 -0500, BobP
wrote:

Hi-

On some of the workstations on my SBS2003 network the Network and
Sharing Center is showing the network connection as "Unauthenticated"
and showing a yellow triangle icon.

It doesn't seem to have any impact on performance that I can see, but
looks messy.

What does Unauthenticated in this context mean, and why do some
stations show it and not others? How do I get rid of it?