Can not set 1080i using NVIDIA Vista Drivers on a dual boot machin
 

Hi - Asked the NVIDIA help site but got a "Beta = no can help" responce so
any ideas would be welcome!
==================
I have a 6200TC in a Home Theater PC connected using Component to a Plasma
TV. The HTPC is a Dual Boot (XP using Forceware 84.21 and Vista Beta 2 using
the Vista Beta 2 drivers). The XP envoronment is working fine with a 1080i
setting and overscan changes to fit the screen properly. My Problem is that
under the Vista environment I can not make many change in the NVIDA Control
Panel (only 3D and Multiple Display is Avail). I have used the Windows
Control Panel to change the resolution to 720x576 but want to get 1080i and
change the overscan if needed but can not find the option anywhere. I have
also notice that intalls/changes in one environment sometime impacts the
other!
Thanks
Nathan

Can not set 1080i using NVIDIA Vista Drivers on a dual boot machin
 

Have you tried the Advanced View feature in Control Panel instead of
Standared View?

"Nathan" wrote in message
...
Hi - Asked the NVIDIA help site but got a "Beta = no can help" responce so
any ideas would be welcome!
==================
I have a 6200TC in a Home Theater PC connected using Component to a Plasma
TV. The HTPC is a Dual Boot (XP using Forceware 84.21 and Vista Beta 2
using
the Vista Beta 2 drivers). The XP envoronment is working fine with a
1080i
setting and overscan changes to fit the screen properly. My Problem is
that
under the Vista environment I can not make many change in the NVIDA
Control
Panel (only 3D and Multiple Display is Avail). I have used the Windows
Control Panel to change the resolution to 720x576 but want to get 1080i
and
change the overscan if needed but can not find the option anywhere. I
have
also notice that intalls/changes in one environment sometime impacts the
other!
Thanks
Nathan

Can not set 1080i using NVIDIA Vista Drivers on a dual boot ma
 

Yup, the only difference between "Std" and "Advanced" view is one option
under "Confugure Your Display" for dual screens. It is almost as there are
no real config options avail in the NVIDIA Control Panel loaded.

"JW" wrote:

Have you tried the Advanced View feature in Control Panel instead of
Standared View?

"Nathan" wrote in message
...
Hi - Asked the NVIDIA help site but got a "Beta = no can help" responce so
any ideas would be welcome!
==================
I have a 6200TC in a Home Theater PC connected using Component to a Plasma
TV. The HTPC is a Dual Boot (XP using Forceware 84.21 and Vista Beta 2
using
the Vista Beta 2 drivers). The XP envoronment is working fine with a
1080i
setting and overscan changes to fit the screen properly. My Problem is
that
under the Vista environment I can not make many change in the NVIDA
Control
Panel (only 3D and Multiple Display is Avail). I have used the Windows
Control Panel to change the resolution to 720x576 but want to get 1080i
and
change the overscan if needed but can not find the option anywhere. I
have
also notice that intalls/changes in one environment sometime impacts the
other!
Thanks
Nathan

Can not set 1080i using NVIDIA Vista Drivers on a dual boot ma
 

I found that there are very extensive help screens available with the
Control Panel. I had it seach on interlaced and a whole string
of HDTV display help sections came up including assistance with
overscanning. Just using Advance mode I found several custom resoluution
and timing option screens available. \

"Nathan" wrote in message
...
Yup, the only difference between "Std" and "Advanced" view is one option
under "Confugure Your Display" for dual screens. It is almost as there
are
no real config options avail in the NVIDIA Control Panel loaded.

"JW" wrote:

Have you tried the Advanced View feature in Control Panel instead of
Standared View?

"Nathan" wrote in message
...
Hi - Asked the NVIDIA help site but got a "Beta = no can help" responce
so
any ideas would be welcome!
==================
I have a 6200TC in a Home Theater PC connected using Component to a
Plasma
TV. The HTPC is a Dual Boot (XP using Forceware 84.21 and Vista Beta 2
using
the Vista Beta 2 drivers). The XP envoronment is working fine with a
1080i
setting and overscan changes to fit the screen properly. My Problem is
that
under the Vista environment I can not make many change in the NVIDA
Control
Panel (only 3D and Multiple Display is Avail). I have used the Windows
Control Panel to change the resolution to 720x576 but want to get 1080i
and
change the overscan if needed but can not find the option anywhere. I
have
also notice that intalls/changes in one environment sometime impacts
the
other!
Thanks
Nathan