Welcome to Vista Banter. You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to ask questions and reply to others posts, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact support. |
|
Hardware and Windows Vista Hardware issues in relation to Windows Vista. (microsoft.public.windows.vista.hardware_devices) |
|
LinkBack | Thread Tools | Display Modes |
|
|||
NVRAID 1 and RC1
I'm attempting to install Vista RC1 cleanly to my computer. I have 3 SATA
drives in my NForce4-based PC. 1 SATA Drive is standalone, while the other 2 are in a RAID 1 array using the onboard NVRAID controller. I am unable to see ANY drives, even after loading either the XP, Beta 2 or RC1 Nvidia drivers for the RAID controller in question. Has anyone else had this issue? Thanks! |
|
|||
NVRAID 1 and RC1
I can not see any drives if I have a RAID array enabled on my nForce 4 mobo.
DIV"Toph" > wrote in message .../DIV I'm attempting to install Vista RC1 cleanly to my computer. I have 3 SATA drives in my NForce4-based PC. 1 SATA Drive is standalone, while the other 2 are in a RAID 1 array using the onboard NVRAID controller. I am unable to see ANY drives, even after loading either the XP, Beta 2 or RC1 Nvidia drivers for the RAID controller in question. Has anyone else had this issue? Thanks! |
|
|||
NVRAID 1 and RC1
I have the same problem with a gigabyte GA-K8NXP-SLI which has both a NV
raid and a SI raid. After loading the drivers only the SI raid drives can be seen. It was OK with 5384 but no longer is !! You can do a fresh install of RC1 will install from Windows XP. Brian "Toph" wrote in message ... I'm attempting to install Vista RC1 cleanly to my computer. I have 3 SATA drives in my NForce4-based PC. 1 SATA Drive is standalone, while the other 2 are in a RAID 1 array using the onboard NVRAID controller. I am unable to see ANY drives, even after loading either the XP, Beta 2 or RC1 Nvidia drivers for the RAID controller in question. Has anyone else had this issue? Thanks! |
|
|||
NVRAID 1 and RC1
I just encountered the exact same problem. I was able to install BetaII and
build 5536 with no problems both with 2 drives set as RAID 0 and one as SATA only and even when I removed the RAID ARRAY completely so I just ran 3 SATA drives alone both versions installed. RC1 will not for me with the nforce 4 chipset. I then tried 5536 and beta II nforce drivers and it see's all of my drives. I just downloaded another ISO file last night and will try it again tonight with the RC1 nforce drivers and the new ISO and will get back to you. FYI I burned the RC1 ISO at 2.4x like they suggested while I had burnt the previous builds at 16x with no issues. The new ISO I downloaded last night I burnt at 8x this time so we'll see what is going on. This is one stubborn OS to deal with so far. I still cannot find a properly working anti-virus either. Phil. "Toph" wrote: I'm attempting to install Vista RC1 cleanly to my computer. I have 3 SATA drives in my NForce4-based PC. 1 SATA Drive is standalone, while the other 2 are in a RAID 1 array using the onboard NVRAID controller. I am unable to see ANY drives, even after loading either the XP, Beta 2 or RC1 Nvidia drivers for the RAID controller in question. Has anyone else had this issue? Thanks! |
|
|||
NVRAID 1 and RC1
Beware, I tried the NVidia RC1 drivers - these do not work for my board
(gigabyte GA-K8NXP-SLI ) which is an AMD nforce4 board. I only get BSODs and have had to re-install Vista RC1. You might be interested in this note: http://www.nforcershq.com/forum/vist...c&high light= Brian "PhilMaznyk" wrote in message ... I just encountered the exact same problem. I was able to install BetaII and build 5536 with no problems both with 2 drives set as RAID 0 and one as SATA only and even when I removed the RAID ARRAY completely so I just ran 3 SATA drives alone both versions installed. RC1 will not for me with the nforce 4 chipset. I then tried 5536 and beta II nforce drivers and it see's all of my drives. I just downloaded another ISO file last night and will try it again tonight with the RC1 nforce drivers and the new ISO and will get back to you. FYI I burned the RC1 ISO at 2.4x like they suggested while I had burnt the previous builds at 16x with no issues. The new ISO I downloaded last night I burnt at 8x this time so we'll see what is going on. This is one stubborn OS to deal with so far. I still cannot find a properly working anti-virus either. Phil. "Toph" wrote: I'm attempting to install Vista RC1 cleanly to my computer. I have 3 SATA drives in my NForce4-based PC. 1 SATA Drive is standalone, while the other 2 are in a RAID 1 array using the onboard NVRAID controller. I am unable to see ANY drives, even after loading either the XP, Beta 2 or RC1 Nvidia drivers for the RAID controller in question. Has anyone else had this issue? Thanks! |
|
|||
NVRAID 1 and RC1
AV: AVG free works just fine here.
"Brian P Fielding" wrote: Beware, I tried the NVidia RC1 drivers - these do not work for my board (gigabyte GA-K8NXP-SLI ) which is an AMD nforce4 board. I only get BSODs and have had to re-install Vista RC1. You might be interested in this note: http://www.nforcershq.com/forum/vist...c&high light= Brian "PhilMaznyk" wrote in message ... I just encountered the exact same problem. I was able to install BetaII and build 5536 with no problems both with 2 drives set as RAID 0 and one as SATA only and even when I removed the RAID ARRAY completely so I just ran 3 SATA drives alone both versions installed. RC1 will not for me with the nforce 4 chipset. I then tried 5536 and beta II nforce drivers and it see's all of my drives. I just downloaded another ISO file last night and will try it again tonight with the RC1 nforce drivers and the new ISO and will get back to you. FYI I burned the RC1 ISO at 2.4x like they suggested while I had burnt the previous builds at 16x with no issues. The new ISO I downloaded last night I burnt at 8x this time so we'll see what is going on. This is one stubborn OS to deal with so far. I still cannot find a properly working anti-virus either. Phil. "Toph" wrote: I'm attempting to install Vista RC1 cleanly to my computer. I have 3 SATA drives in my NForce4-based PC. 1 SATA Drive is standalone, while the other 2 are in a RAID 1 array using the onboard NVRAID controller. I am unable to see ANY drives, even after loading either the XP, Beta 2 or RC1 Nvidia drivers for the RAID controller in question. Has anyone else had this issue? Thanks! |