I am trying to set up printer sharing but am having problems.
I have a Windows XP Desk Top and have just put a router on for my laptop
which is Windows Vista.
I think i have followed all the instruction correct, i'v got wireless
connection to my Broadband through my PC to laptop but i have tried to
printer share(printer on PC) with no success. I have set up a network but
cant see my PC or Printer on it. Do i have to install my printer on laptop
with disk or what.
Please help, i have pulled all my hair out trying to set it up (now bald).
What am i doing wrong.
Regards.
Hotwheels
--
Please treat me carefully as i am a new user

hotwheels wrote:
I am trying to set up printer sharing but am having problems.
I have a Windows XP Desk Top and have just put a router on for my laptop
which is Windows Vista.
I think i have followed all the instruction correct, i'v got wireless
connection to my Broadband through my PC to laptop but i have tried to
printer share(printer on PC) with no success. I have set up a network but
cant see my PC or Printer on it. Do i have to install my printer on laptop
with disk or what.
Please help, i have pulled all my hair out trying to set it up (now bald).
What am i doing wrong.
Regards.
Hotwheels

If you can't see your machines on the network, then you haven't set up
the network correctly. Since I don't know exactly what you did (or
didn't), all I can offer you is general networking troubleshooting
steps. Go through them systematically and you'll be able to network.
After you get the Local Area Network (LAN) file/printer sharing set up,
go to the Printers applet in XP and share the printer. Then go to the
laptop and install Vista drivers. Get the drivers by going to the
printer mftr.'s website and downloading them. That way you'll have the
latest ones. When you install the drivers on the Vista laptop, the
installation routine should see the printer connected to XP now. The
exact way to install a printer does depend on how the printer mftr.
wrote the install routine but in general that's the way you do it.

*****
This link will take you through Vista networking very well:

http://www.microsoft.com/technet/net.../vista_fp.mspx

Problems sharing files between computers on a network are generally
caused by 1) a misconfigured firewall; or 2) inadvertently running two
firewalls such as the built-in Windows Firewall and a third-party
firewall; and/or 3) not having identical user accounts and passwords on
all Workgroup machines; 4) trying to create shares where the operating
system does not permit it.

Here are some general networking tips for home/small networks:

1. Configure firewalls on all machines to allow the Local Area Network
(LAN) traffic as trusted. With Windows Firewall, this means allowing
File/Printer Sharing on the Exceptions tab. Normally running the Network
Setup Wizard on XP will take care of this for those machines.The only
"gotcha" is that this will turn on the XPSP2 Windows Firewall. If you
aren't running a third-party firewall or have an antivirus with
"Internet Worm Protection" (like Norton 2006/07) which acts as a
firewall, then you're fine. With third-party firewalls, I usually
configure the LAN allowance with an IP range. Ex. would be
192.168.1.0-192.168.1.254. Obviously you would substitute your correct
subnet. Do not run more than one firewall.

2. With earlier Microsoft operating systems, the name of the Workgroup
didn't matter. Apparently it does with Vista, so put all computers in
the same Workgroup. This is done from the System applet in Control
Panel, Computer Name tab.

3. Create identical user accounts and passwords on all machines. If you
wish a machine to boot directly to the Desktop (into one particular
user's account) for convenience, you can do this. The instructions at
this link work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

4. If one or more of the computers is XP Pro or Media Center:

a. If you need Pro's ability to set fine-grained permissions, turn off
Simple File Sharing (Folder OptionsView tab) and create identical user
accounts/passwords on all computers.

b. If you don't care about using Pro's advanced features, leave the
Simple File Sharing enabled.

Simple File Sharing means that Guest (network) is enabled. This means
that anyone without a user account on the target system can use its
resources. This is a security hole but only you can decide if it matters
in your situation.

I think it is a good idea to create the identical user
accounts/passwords in any case when Vista machines are involved and it
isn't an onerous task with home/small networks.

5. Create shares as desired. XP Home does not permit sharing of users'
home directories (My Documents) or Program Files, but you can share
folders inside those directories. A better choice is to simply use the
Shared Documents folder. See the first link above for details about
Vista sharing.
*****

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User

Thanks very much Malke,
Im going to try that now.
Regards
Hotwheels
--
Please treat me carefully as i am a new user


"Malke" wrote:

hotwheels wrote:
I am trying to set up printer sharing but am having problems.
I have a Windows XP Desk Top and have just put a router on for my laptop
which is Windows Vista.
I think i have followed all the instruction correct, i'v got wireless
connection to my Broadband through my PC to laptop but i have tried to
printer share(printer on PC) with no success. I have set up a network but
cant see my PC or Printer on it. Do i have to install my printer on laptop
with disk or what.
Please help, i have pulled all my hair out trying to set it up (now bald).
What am i doing wrong.
Regards.
Hotwheels

If you can't see your machines on the network, then you haven't set up
the network correctly. Since I don't know exactly what you did (or
didn't), all I can offer you is general networking troubleshooting
steps. Go through them systematically and you'll be able to network.
After you get the Local Area Network (LAN) file/printer sharing set up,
go to the Printers applet in XP and share the printer. Then go to the
laptop and install Vista drivers. Get the drivers by going to the
printer mftr.'s website and downloading them. That way you'll have the
latest ones. When you install the drivers on the Vista laptop, the
installation routine should see the printer connected to XP now. The
exact way to install a printer does depend on how the printer mftr.
wrote the install routine but in general that's the way you do it.

*****
This link will take you through Vista networking very well:

http://www.microsoft.com/technet/net.../vista_fp.mspx

Problems sharing files between computers on a network are generally
caused by 1) a misconfigured firewall; or 2) inadvertently running two
firewalls such as the built-in Windows Firewall and a third-party
firewall; and/or 3) not having identical user accounts and passwords on
all Workgroup machines; 4) trying to create shares where the operating
system does not permit it.

Here are some general networking tips for home/small networks:

1. Configure firewalls on all machines to allow the Local Area Network
(LAN) traffic as trusted. With Windows Firewall, this means allowing
File/Printer Sharing on the Exceptions tab. Normally running the Network
Setup Wizard on XP will take care of this for those machines.The only
"gotcha" is that this will turn on the XPSP2 Windows Firewall. If you
aren't running a third-party firewall or have an antivirus with
"Internet Worm Protection" (like Norton 2006/07) which acts as a
firewall, then you're fine. With third-party firewalls, I usually
configure the LAN allowance with an IP range. Ex. would be
192.168.1.0-192.168.1.254. Obviously you would substitute your correct
subnet. Do not run more than one firewall.

2. With earlier Microsoft operating systems, the name of the Workgroup
didn't matter. Apparently it does with Vista, so put all computers in
the same Workgroup. This is done from the System applet in Control
Panel, Computer Name tab.

3. Create identical user accounts and passwords on all machines. If you
wish a machine to boot directly to the Desktop (into one particular
user's account) for convenience, you can do this. The instructions at
this link work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

4. If one or more of the computers is XP Pro or Media Center:

a. If you need Pro's ability to set fine-grained permissions, turn off
Simple File Sharing (Folder OptionsView tab) and create identical user
accounts/passwords on all computers.

b. If you don't care about using Pro's advanced features, leave the
Simple File Sharing enabled.

Simple File Sharing means that Guest (network) is enabled. This means
that anyone without a user account on the target system can use its
resources. This is a security hole but only you can decide if it matters
in your situation.

I think it is a good idea to create the identical user
accounts/passwords in any case when Vista machines are involved and it
isn't an onerous task with home/small networks.

5. Create shares as desired. XP Home does not permit sharing of users'
home directories (My Documents) or Program Files, but you can share
folders inside those directories. A better choice is to simply use the
Shared Documents folder. See the first link above for details about
Vista sharing.
*****

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User