|
|
Microsoft Office Keyboard RT9450 by
Russ Valentine
Problem persists in 5536. I can find no newer drivers or updates for the
keyboard that will restore functionality.
--
Russ Valentine
306551
"The Barsteward" wrote:
Vista has recognised the keyboard but has not allowed functionality of the
|
|
0 |
770 |
|
|
External Hard Drive Not Working by
dsmturbo
Having same problem with an external USB hard drive enclosure. It is very
strange, Vista won't boot if it is turned on, however it was on when I
installed Vista.
If I turn it on while in Vista, I get the clunk/clunk device detected sound
but it never shows up.
"ironj221" wrote:
I'm havn't found a solution yet, let me know if you do.
|
|
0 |
788 |
|
|
Intel 950GMA drivers in RC1 ?? by
wgd
In article ,
says...
Hi,
Did any one hear about it? Do you know if Vista RC1 will have native drivers
for this integrated graphics? I just spend 45 minutes playing hide and seek
with "Desktop Properties" to make "Intel Lakepod driver" change my
resolution back to maximum, so I can see anything on the...
|
August 27th 06 08:29 PM
by wgd
|
0 |
755 |
|
|
Need to reload my HP printer but can not =64bit by
Neal
Do to some issues I now have to reinstall my HP 2610. I had it loaded as
the 990C before so I could print at least but now I can not load it. I go
to add a printer, it sees my HP on the network but it will not give me a
list of HP dirvers to choose from. I only get asked if I have a hard disk
or to try windows update but that list only gives me Dell drivers.
I did see a few posts with...
|
August 28th 06 03:35 AM
by Neal
|
1 |
840 |
|
|
NVida 6200LE by
HagarTheHorrible
OK... here is the problem. I recently upgraded from an ATI Sapphire with 128
meg of memory to an NVida 6200LE with 256 meg of memory that I bought from
Tiger Direct. When I had tried to burn DVDs using my old video card I got
the warning message that my ATI card was not sufficiently powerful to handle
the job - hence the upgrade.
Now with the new NVida card whenever I try to run WMV files,...
|
|
0 |
826 |
|
|
TV Turners in Windows Vista Beta2 by
DeBeDos
Hi all,
I installed Windows Vista Beta2 in my system for evaluating.
System Description:
Intel PIV 2,53 Ghz
2 GB RAM
HD, Various Disks - System Partition 100GB
ATI RADEON 9600 Pro 256MB AGP
Motheboard ASUS P4P800-E Deluxe
TV Turner:
|
August 28th 06 01:19 PM
by Chris
|
1 |
950 |
|
|
FDTI USB To Serial drivers cause BSOD by
baddawgg
I have several devices that use the FDTI chip to create a serial port. One or
two work but when I install all my serial devices (I have five) I get a BSOD.
Everything worked fine in XP.
|
|
0 |
791 |
|
|
Microsoft Driver for "Legacy Audio Devices" by
Andrew Fiddian-Green
In Windows XP most basic sound cards are supported by drivers written by
Microsoft for supporting "Legacy Audio Devices"
But it seems that Microsoft written drivers for such legacy audio devices
were not delivered in Vista Beta 2.
I am assuming such drivers are included in later builds. = But I wonder if
there is anywhere I can get them for the current Beta #2?
|
|
0 |
958 |
|
|
Updating ATI or Intel Drivers on RC1 and Pre-RC1 builds by
B Barley
I doubt cmedia will get their act together for their new drivers for their
most basic motherboard chipsets used by manufactures like asus.
I've been using the win xp drivers, and it works...barely. I have a 7.1
surround sound system set up and all I get is the center speaker.
"JW" wrote:
By the time of the final release of Vista all of the hardware suppliers
should have released to MS...
|
|
0 |
752 |
|
|
Drive Error-Checking by
dexos
I imagined this to be an easy task. I just ran the drive-check on my d: drive
but I am unable to locate the log file to see if there were any problems
Does anyone know the location of this file?
|
August 29th 06 02:59 AM
by dexos
|
0 |
802 |
|
|
log file for drive-check by
dexos
Just ran the check disk on my d: drive. I am unable to find the log file to
see if there were any problems.
Does anyone know where this is?
|
August 29th 06 03:01 AM
by dexos
|
0 |
657 |
|
|
ATI Radeon Drivers - Code 43, Code 37 & Code 10 by
Rev Mike
Jake,
Don't know if you've found a solution to this problem and interestingly
enough no one else has reported a real solution either. I have a 9550 card
too and what finally worked for me were the drivers from 2004 that came with
the card's driver disk info follows:
Ati Technologies Inc.
7/10/2004
6.14.10.6458
|
|
0 |
647 |
|
|
Sata Drivers - New Hope! by
tonya
I am running Vista Beta 2 build 5384 using an old MSI motherboard. When I
installed Vista, my SATA onboard drivers stopped working (Promise FastTrak
376 type), as did the third IDE port. No amount of reinstalling drivers
worked. Then I came across an IDE card from Maxtor called the SATA/150 which
was in the box of a new HD I bought for my daughter. Out of curiosity, I
installed that on my...
|
August 29th 06 10:09 AM
by tonya
|
0 |
604 |
|
|
Promise FastTrak 376 ? by
tonya
I have trouble with this controller on my MoBo as well (an aging MSI Neo).
By chance, I stumbled over a Maxtor SATA/150 card that is an IDE PCI card
with 2 x Sata and an IDE socket as well. Installed it with XP drivers from
Maxtor's site, and lo & behold it works. I'm running Vista B2 build 5384.
Hope this helps! Tonya From Norway.
"Jim Willsher" wrote:
Hi,
|
August 29th 06 10:15 AM
by tonya
|
0 |
688 |
|
|
|
|
3 |
631 |
|
|
FDTI Serial chip/driver causes BSOD by
baddawgg
I have five devices that use FDTI serial chips. when I try to connect more
than one or two of them (it varies--not consistant) I get a BSOD and have to
use system restore to get running again. I got the signed driver from
fdtichips.com for XP.
|
|
1 |
629 |
|
|
SpeedTouch 330 USB ADSL Modem Driver by
kamesh192
"John Barnett MVP" wrote:
I had replied to this one, but it seems to have diappeared.
My speedtouch 330 is running fine on Vista, even using the older drivers
supplied from my ISP's CD.
Do you have a network card on your PC? If so has Vista recognised it.?
I had a similar where i could install the speedtouch software but then it
|
|
0 |
599 |
|
|
Can not set 1080i using NVIDIA Vista Drivers on a dual boot machin by
Nathan
Hi - Asked the NVIDIA help site but got a "Beta = no can help" responce so
any ideas would be welcome!
==================
I have a 6200TC in a Home Theater PC connected using Component to a Plasma
TV. The HTPC is a Dual Boot (XP using Forceware 84.21 and Vista Beta 2 using
the Vista Beta 2 drivers). The XP envoronment is working fine with a 1080i
setting and overscan changes to fit the...
|
August 29th 06 10:07 PM
by JW
|
3 |
600 |
|
|
Asus PVR-416 by
Rob Wilkens
I have an HP Media Center m470n and it allegedly has an 'Asus PVR-416' TV/FM
card in it. Worked fine in XP/MCE2005 but I didn't dare try the XP driver
in Vista. I don't know where to look for drivers. Anyone have any luck
with this?
-Rob
|
August 29th 06 11:00 PM
by JW
|
1 |
658 |
|
|
Toucam Pro II by
Arie
My cam is not working properly, Windows finds the cam, but can only use it
for sound(mic), but i cant use it as a camera. also the light on my cam is
burning all the time.. so my cam is in use. but im not using it..
anyone who knows what to do?
|
August 30th 06 08:35 AM
by Arie
|
0 |
671 |