|
|
HP DC7600CMT - Nvidia ASUS N6600GT problem by
Skippy
There seems to be an incompatibility when trying to use an HP DC7600CMT with
any nVidia PCI express card. The one I am attempting to use is the ASUS
N6600GT. The HP DC7600CMT has an onboard intel graphics chip that DOES work
fine. However, when trying to use the nVidia card I receive this error in
device manager:
This device cannot find enough free resources that it can use. (Code 12)
It...
|
|
1 |
461 |
|
|
PnP-X hardware by
cyanna
Anybody knows about any WSD-based printers or storage devices? Or otherwise
PnP-X enabled.......
|
September 10th 06 05:34 PM
by cyanna
|
0 |
415 |
|
|
Hard drive works on USB but not firewire by
Pgo
I have a USB/Firewire hard drive (with 3 buttons, I never use for starting
backups)
The devise works fine when I connect it by USB, but I get a drvier error
when I connect it via Firewire.
I would exspect it is the buttons that are causing the MS driver not to work.
Any suggestions on how to fix this?
|
September 10th 06 06:20 PM
by Pgo
|
0 |
413 |
|
|
Scanner doesnt work in Rc1 but worked in Beta2... by
Jason
I have an HP scanjet 4600 that I cant seem to get to work. The computer
detects it but HPs scanner software wont even load in RC1 (it worked fine in
Beta2) and the built in windows fax/scan software also acts up. It can do a
preview scan but if I try to actually scan it gives an error:
"Error applying settings to driver"
I cant get it to scan at all now, yet it worked perfectly in...
|
September 10th 06 06:57 PM
by Jason
|
0 |
530 |
|
|
Scanner worked in Beta2 but not in Rc1 by
Jason
My HP scanjet 4600 doesnt work in RC1 but worked perfectly in Beta2. The HP
software wont even attempt to load and the Windows fax and scan gives an
error.
It can do a preview scan so I know the system can control the scanner. But
if I try to "scan" it gives error: "Error applying settings to driver"
Any ideas?
|
September 10th 06 06:59 PM
by Jason
|
0 |
621 |
|
|
Vista doesn't find all my ram on a Dell 700m by
Jonathan
Just installed Vista RC1 on my Dell 700m laptop. Everything went smoothly
and performance seems ok but for some reason Vista only reports my computer
as having 512MB of Ram when I know there is a 1GIG stick in it.
Anyone else having problems like this?
|
|
0 |
517 |
|
|
Atheros Wireless network Adapter Trend micro common firewall miniport) by
Robert
Help (D-Link wireless). l can't run my Zone Alarm Security Suite on Vista
RC1 5600,however i decided too instal Trend Micro pc-cillin internet
security suite 14 (beta)2007 Release).
ERROR: This device is not working properly because Windows cannot load the
drivers required for this device. (Code 31) trend micro firewall miniport
PS: device manger has 2 wireless adapters showing.
Atheros...
|
September 10th 06 08:59 PM
by Robert
|
0 |
486 |
|
|
|
September 10th 06 11:25 PM
by buddy
|
0 |
505 |
|
|
|
September 10th 06 11:26 PM
by buddy
|
0 |
477 |
|
|
resource conflict (code 12) = no aero by
johannes
HI,
I own a computer with the folowing components and i've big problems with
windows Vista RC1 and beta2:
ASrock 775XFire-eSATA2 with Intel 945PL chipset
Gigabyte GV-NX66L128DP PCI Express vga with GeForce 6600LE Chip/128MB
Intel Pentium D 930
1024MB RAM
The computer reports a resource conflict between PCI Express root port and
|
|
0 |
441 |
|
|
resource conflict = no aero by
orgler
I own a computer with the folowing components and i've big problems with
windows Vista RC1 and beta2:
ASrock 775XFire-eSATA2 with Intel 945PL chipset
Gigabyte GV-NX66L128DP PCI Express vga with GeForce 6600LE Chip/128MB
Intel Pentium D 930
1024MB RAM
The computer reports a resource conflict between PCI Express root port and
the vga card. So I can only use the vga in safe mode. I've tried both...
|
September 10th 06 02:44 PM
by orgler
|
0 |
430 |
|
|
NVRAID 1 and RC1 by
Toph
I'm attempting to install Vista RC1 cleanly to my computer. I have 3 SATA
drives in my NForce4-based PC.
1 SATA Drive is standalone, while the other 2 are in a RAID 1 array using
the onboard NVRAID controller. I am unable to see ANY drives, even after
loading either the XP, Beta 2 or RC1 Nvidia drivers for the RAID controller
in question.
Has anyone else had this issue? Thanks!
|
September 10th 06 05:44 PM
by cyanna
|
5 |
484 |
|
|
Western Digital External Drive by
like2hike
I have attached a WD external drive via a FireWire connection. Device Manager
says FireWire port is good. The drivers seem to install correctly. But the
drive does not appear in MyComputer.
Vista does not recognize any USB ports for me to connect the WD external
drive that way.
Any thoughts?
|
September 10th 06 02:19 PM
by MICHAEL
|
2 |
412 |
|
|
Printers that WILL work in Vista? by
chessman
How'd you get it to work? Anything special?
"Urstad" wrote:
Got my Hp laserjet 1020 to work in vista32 with xp32 drivers. its b&w and
very cheap.
~urstad
|
September 11th 06 03:41 AM
by Ray
|
1 |
496 |
|
|
Nvidia 7900 GT driver issue (96.33) by
eaglewolf
I've just installed the 96.33 drivers
(96.33_forceware_winvista_x86_international) on Vista RC1 (32 bit, build
5600) and have run into a problem. I have (identical) dual monitors set up,
and on the primary, I've found that with the new drivers the screen starts
flashing pixels (similar to interference on digital TV). This interference
also becomes more prominent when the mouse is hovering...
|
|
2 |
601 |
|
|
Vista 32bit and Creative X-Fi by
Sven
I got the betadriver from Creative, and it worked in Beta 2, but not in RC1.
I install them, and after the warning about the driver, I choose INSTALL
DRIVER. After it is finished, it wants to reboot my PC, but when it is
rebooted, there is still no driver installed for the X-Fi.
Other with same problem?
Regards
Sven
|
September 10th 06 09:20 PM
by Robert
|
1 |
525 |
|
|
Sitecom wl-141 driver? by
Radexx
I have a sitecom wl-141 wireles network adapter, but i can't get it to work.
After installing the driver I got a error message that says something like: A
problem encountered with installing, can't load the driver. I know sitecom
doesn't support Vista, but how can i get my wireless adapter to work with
vista?
|
September 10th 06 01:15 PM
by Radexx
|
0 |
621 |
|
|
resource conficts by
orgler
I own a computer with the folowing components and i've big problems with
windows Vista RC1 and beta2:
ASrock 775XFire-eSATA2 with Intel 945PL chipset
Gigabyte GV-NX66L128DP PCI Express vga with GeForce 6600LE Chip/128MB
Intel Pentium D 930
1024MB RAM
The computer reports a resource conflict between PCI Express root port and
the vga card. So I can only use the vga in safe mode. I've tried both...
|
September 10th 06 02:42 PM
by orgler
|
0 |
399 |
|
|
Asus P5WD2-e Premium SATA driver for RC-1 by
RichNRockvilleMD
I have been unable to find the drivers for my SATA drive on my
Asus mother board. I have a single 160Gig SATA drive and
the controller disk from Asus will not allow me to install the driver.
I searched the Asus site and no joy.
Anyone with any ideas?
It seemed that the Beta versions seem to work fine and I did an upgrade
but still no luck.
Everything seems to be working as I get a 5.4 on my...
|
|
1 |
436 |
|
|
Radeon 9250 by
Tete Mensa-Annan
I have an ATI Radeon 9250 in my Dell Dimension 4600C and it causes a blue
screen crash every time I shutdown or use switch user. The performance
information and tools app tells me that the 3D business and gaming graphics
performance is 1.0 which seems oddly low for that graphics card.
dxdiag tells me that DirectDraw, Direct3D, and AGP Texture Acceleration is
enabled
I'm running Battle for...
|
September 11th 06 01:25 AM
by Michael
|
4 |
528 |