|
|
Additional monitor displays background but nothing else. by
Sideways
My additional monitor displays the desktop background but no other
information at all. I am running Vista Home Premium.
Can anyone please help me to get the second screen (Samsung 245B) to
replicate what's on the first (Fjitsu Amilo 1718)?
|
|
4 |
176 |
|
|
SATA DVD Burners by
Sid-M
I apologize for my ignorance, but I just can't find an answer. I notice that
the SATA DVD Burners, such as Sony and Samsung, do not have an audio output.
Does this mean that it is not required to connect the audio output to your
sound card if the drive is SATA? Thanks for any information.
|
|
3 |
271 |
|
|
Windows Media Player the Default by
Sid-M
Whenever I insert a DVD disc in the drive, Windows Media Center opens. I
have set AutoPlay to open with Windows Media Player, but Media Center opens
every time. Is there a way to make Windows Media Center the default player
for DVDs? Thanks for any help.
|
March 27th 08 07:51 AM
by Sid-M
|
0 |
302 |
|
|
compatible vista soundcard? by
Sid Fishes
have an audigy SE with Vista Ultimate, sound is choppy, no mic, and as you
all prob know, Creative support
on this is zero.
can someone please recommend me a 100% Vista compatible PCI or USB sound
card?!
thank you!
Sid
|
|
4 |
194 |
|
|
Hard drive light constantly flashing ,reading hard drive during id by
Sid
I need some answers to a question, actually an answer or opinion. I have a
dual boot machine XP/Vista Home Prem. , This is a pretty fast machine with
plenty of horsepower to run Vista. Gigabyte Mobo, Athlon 64 X2 4400+ chip,
4gb OCZ 800mhz. RAM, plenty of cooling and I'm not overclocking the processor
or anything like that. During system IDLE the HD light is constantly flashing
and I can...
( 1 2)
|
|
18 |
1,410 |
|
|
RC2 installed drivers newer than 96.33? by
sickpuppy
I upgraded from RC1 to RC2. After a successful upgrade, I checked the video
drivers. RC2 had recognized my Nvidia card correctly and had installed a
driver from Nvidia, which I think is newer than 96.33. The new driver was
7.14.10.9677. It, so far, is working fine. I have played HL2 on Steam and
there was no problem. Unlike before with RC1 and driver 96.33.
Is this a newer driver or not....
|
|
4 |
148 |
|
|
Nvidia 96.85 drivers won't load. by
sickpuppy
Downloaded new Nvidia 96.85 x86 drivers and they will not load. I get an
error msg stating that I am not running Windows Vista, even though I am
running Windows Vista RC2 Build 5744 and video card is a Nvidia GeForce 6600
256mb video memory.
I was really hoping that these drivers would work and gaming would be
improved.
I followed the instructions and turned off virus software and unloaded...
( 1 2)
|
|
11 |
398 |
|
|
DVD/CD drive not working by
Sicknerd
hello chumps
there seems to be a problem.. obviously
it seems that my laptop unable to read any cd-r, when i open Nero for
example, it can't detect my dvd/cd burner drive.
i still can run dvd-r and it works fine except for cd-r
i tried burning a cd using my friend's laptop, its works and there a
stuff in the cd. but when i insert in mine, there's nothing contain in
it.
|
|
3 |
190 |
|
|
|
March 11th 07 03:18 PM
by JW
|
2 |
150 |
|
|
SUPBackGround.exe by
Sian
Has I waited for my computer to show all my programs on the screen a message
came up saying that SUPBackGround.exe is not responding and will be shut
down. I would appreciate it if someone could explain to me what it is because
I have done a search in my computer and I can note find this problem and I
have looked in the help section and support program and I still don't know
what it is.
|
|
1 |
199 |
|
|
Random reboots & BSOD by
si77
I have a custom built machine that used to run XP, with all the latest
patches packs etc, and it was very stable and usable.
I bought the Vista Ultimate 64bit and formatted my RAID array and
completed a clean install, no problem.
However, it became apparent that there was something seriously wrong as
the PC new randomly reboots. It can be sat idle, and reboot! I took
advise and switched off...
|
March 29th 07 09:26 PM
by si77
|
1 |
117 |
|
|
iTunes says my blank CD is not blank by
shypurplepanda
I've been trying to burn an audio CD on my computer (i've only had this
computer for a few months and this is the first time I've tried burning any
kind of disc), and when I put the CD in and hit burn it says that my cd is
not blank, I tried a handful of blank cds and it spit them all back out at me
saying it's not blank. Just to make sure, I opened my computer and looked at
the disc there...
|
February 26th 08 05:08 PM
by Shilps
|
5 |
151 |
|
|
Dell Hardware Issue with Windows Vista by
Shyotter
I bought a Dell Dimension 9200 with Windows XP MCE in September 2006. I then
bought aa copy of Windows Vista Home Premium to replace XP MCE. I am having
an issue getting the front headphone socket to work (The USB ports in the
panel are fine). The system also locks for about two minutes after the system
has been running for five minutes of so and then one of my DVD ROM drives
drops offline....
|
February 21st 07 01:10 PM
by pvdg42
|
1 |
229 |
|
|
USB devices stopped working by
shygirlxoxo
Last week all of my USB devices stopped showing up. I have tried the printer,
the PSP and my camera and card reader. The ports are fine but the computer
stopped detected all plug n play type devoces. Anyone have any idea whats
going on?
|
|
0 |
503 |
|
|
USB stopped working by
shygirlxoxo
Last week all of my plug n play type devices stopped working. No camera, no
printer, no PSP!!! lol Anyone out there that can help a girl out?
|
|
0 |
493 |
|
|
|
|
0 |
684 |
|
|
Unable to install USB HP Printer (photosmart 3210) by
Shwoarma
Hello all,
I am Running vista Home premium and have a problem installing the HP printer.
I install the software and then connect the USB lead and turn on printer.
The software looks for the printer, Vista's own hardware detect comes on,
then I get a problem.
It asks for which file to select either on my c drive in the windows / inf
folder or windows update version. Which ever I select I...
|
|
2 |
176 |
|
|
DX10.1 and current graphics cards by
Shwoarma
Unsure where to post this one....
We have all read the current rumours floating around the web. Does anybody
actually or can confirm or deny that the latest graphics cards (8800 GTX etc)
are compatible with the upcoming DX10.1 release?
I have two on order and while I still have the option would like to cancel
if this is true.
|
August 15th 07 09:20 AM
by CJM
|
7 |
151 |
|
|
SATA lightscribe DVD writer by
Shwoarma
Hello,
I know that this has been covered numerous times but I still cannot
get it to work.
I have a SATA Samsung SH-183A drive is recognised by windows vista, it
writes and burns ok. I have installed the latest applications from
lightscribe.com (LSS and the simple labler) both installed ok. But Simple
Labler will not recognise a lightscribe device.
I have the latest firmware from...
|
|
0 |
147 |
|
|
Wrong values for processor in device manager by
Shwoarma
Odd one upgraded for an amd 5200 to a 6000. Device manager shows the 5200
still.
BIOS recognises it as a 6000, so does other cpu recognition software ie
NVIDIA ntune, cpuz etc.
Any ideas???
|
September 21st 07 03:30 PM
by ALUT
|
5 |
183 |