|
|
GeForce Go Problems by
Sapaca
I just installed Vista on my laptop and it did not detect my Video Card as
the GeForce Go 7200 that it is. I don't know what drivers to go for or
anything, and a lot of features are disabled because Vista thinks I have a
lousy card.
Any help would be greatly appreciated.
-Sapaca
|
October 7th 06 06:28 AM
by Sapaca
|
5 |
111 |
|
|
Computer crashes with 3gb and 4gb DDR3 Ram, but works with 2gb and by
santiago83
Here are my pc stats. Proc. C2Quad 9300, Mobo DX38BT, 4gb RAM dual
channel (Kingston set of two 2gb strips, DDR3 1333), NVIDIA GeForce
XFX 8800GT 512mb ddr3, HD SG 750gb, PSU Satellite 600w, Windows Vista
Ultimate 32 (same problem happened under Win XP, and I´d be willing to move
up to Vista Ultimate 64).
Here´s the thing. When I turn on my pc with just ONE of the two memory
strips (2gb),...
|
October 11th 08 11:20 PM
by PvdG42
|
1 |
235 |
|
|
Computer crashes with 4gb DDR3 RAM, but works with 2gb by
santiago83
Here are my pc stats. Proc. C2Quad 9300, Mobo DX38BT, 4gb RAM dual
channel (Kingston set of two 2gb strips, DDR3 1333), NVIDIA GeForce
XFX 8800GT 512mb ddr3, HD SG 750gb, PSU Satellite 600w, Windows Vista
Ultimate 32 (same problem happened under Win XP, and I´d be willing to move
up to Vista Ultimate 64).
Here´s the thing. When I turn on my pc with just ONE of the two memory
strips (2gb),...
|
|
4 |
222 |
|
|
Windows XP Error Message by
santemplar
Please help me. I Windows XP. There was a message on the screen:Due to
disconnecting abruptly using power surge set up ' Start Windows Normally';
'Start in Safe Mode';'Start Mode with Networking'; 'Start with Command
Prompt. I searched for away to fix this and I did a System Recovery of all
files on hard drive according to directions on HP Support. I recovered the
originals files but I now...
|
|
2 |
165 |
|
|
Problem with RAM by
SankSoft
I have the following hardwa
motherboard Abit AB9 Pro
4 x 1Gb DDR2 PC-6400, 800MHz KINGMAX RAM
(two RAM modules are of model: KLDD48F-A8KB5, and two: KLDD48F-A8KI5)
Intel Core2 Duo E6600 @2.40GHz CPU
Motherboard correctly recognize all 4Gb of RAM (Info at the boot), but when
I open basic information about my computer in Vista Ultimate (32 bit) it
shows that I have 3070Mb of RAM.
|
|
7 |
148 |
|
|
SDIO WLAN support during sleep by
Sankara Narayanan V
Windows Vista does not seem to support the SDIO based Wireless LAN cards
during standby/hibernate (S3/S4). Seems like Vista blocks the power supplied
to the device/bus during the sleep. Power should be supplied to the
bus/device if the wireless card need to support wake on feature.
Is it a bug or Windows Vista does not implement this support?
Any discussions/knowledge sharing/comments will...
|
July 10th 07 12:00 PM
by freddy
|
4 |
99 |
|
|
Hard Disk Data Recovery by
SANJAY PAWAR
Hi there,
My laptop IBM R50 hard drive started giving problem.
Suddenly partition table is automatically deleted and my data is lost. I
tried recovering using Stellar Phonix but all efforts are gone in vain.
Pls suggest, what reliable software should I use to recover it.
Thanks in advance
Best Regard
|
|
6 |
206 |
|
|
file conversion method by
SANJAY PAWAR
File which I have created using Windows XP/ Microsoft excel are not opening
in
windows vista/ Microsoft worksheet.
What to do, I do not understand.
Pls suggest !
Best Regards
Sanjay
|
|
1 |
125 |
|
|
sony handycam, can't capture videos by
Sanisandra
sorry, this is going to be long, because i am very frustrated.
I have a sony handycam and I am trying to get the videos onto my computer.
before i had vista everything worked fine, now it does not work.
When I use sony's own program ( picture package ) with usb-stream I can get
the videos but without audio ( yes I tried every sound device ), when I try
plug-and-burn, my camera is not...
|
|
1 |
111 |
|
|
Question regarding 'Event12, Kernel-WHEA' Error Log by
sangwooksohn
I have question regarding Kernel-WHEA (EventID 12) error log which seems to
appear everytime Windows boots up.
I am currently running Windows Vista Ultimate x64 on AMD Opteron 280 box
with 4GB RAM. And I see following error log in Event Viewer;
Event12, Kernel-WHEA
Machine Check Event reported is a fatal Bus or Interconnect timeout error.
Memory Hierarchy Level: 3
Participation: 0
|
|
6 |
122 |
|
|
Partition allocation by
Sangs
I have Windows vista home edition , hard disk 160GB. Created partion through
Shrink of 60 GB. Now showing as 58.59 GB unallocated.
When Through "New simple volume", what should be the simple volume size as
selecting 59gb or any other size, shows "there is not enough space available
on the disk(s) to complete this operation"
Can anyone suggest? Restore has already been disabled
|
|
4 |
149 |
|
|
Shrinking/expanding basic volumes by
Sandy[_4_]
I just wanted to confirm a few things before I screwed up something (like,
my OS). Usually, I'd use Partition Magic to resize partitions, but
apparently, Vista includes something quite similar (and PM won't work on
Vista) so I thought I'd give it a go. Also, this is with basic volumes, not
dynamic.
I have a single hard drive partitioned as:
Primary
Extended - contains three logical...
|
|
8 |
154 |
|
|
Scanner Canon Canoscan 3000f on 64bit Vista by
SandyX
There are no drivers for my scanner as it is not compatible with 64bit Vista.
Does this mean my scanner is now redundant? Hey, I like this scanner!! Is
there a solution or is it now a pedal car?
--
SandyX
|
|
5 |
248 |
|
|
Lifecam vx-6000 trouble by
sandythehippy
i have a vx6000 and installed it as instructed. everything appeared fine it
told me it was finished installing and to plug in the camera, but every time
i actually try to use the lifecam software windows tells me that it has
stopped working....
Any clues?
|
September 11th 08 05:46 PM
by Kecia
|
2 |
239 |
|
|
Headset in front jack not working by
Sandy
I have 2 problems and can someone please help?
1) Headset plugged into front jacks is not working and it looks like my PC
hasn't even sensed the headset bcos I expected it to it ask me about what I
have plugged into the jack if it was not sure.
2) Rear speakers are working fine for playbacks. Rear jack microphone is
working for recording but the issue is the audio being recorded cannot be...
|
|
2 |
161 |
|
|
Windows Mobile Device by
Sandy
Hi there. I set up my IPAQ to synchronise Outlook Calendar, Mail, Address
Book and Tasks and it worked on a number of occassions. Then suddenly it
stopped and now Vista thinks that my IPAQ is a 'File Store' (that's the
description it gives in thepartnership screen) and the only thing I can do is
load media files onto the IPAQ, no opportunity to synchronise with Outlook
anymore.
|
|
7 |
171 |
|
|
Safely Remove Hardware by
Sandrien13
When trying to safely remove a SanDisk Cruzer 2GB flash drive on my new
laptop, it does not stop the device. Actually, nothing happens. The icon does
appear in the taskbar, but it just doesn't do anything.
When trying to remove it via windows explorer, explorer freezes and has to
be restarted.
When shutting down or restarting Vista with the USB device still attached it
freezes. In safe mode,...
|
|
9 |
171 |
|
|
DVD Drive Gone by
Sandra Smithey
I just installed the 32-bit Vista Ultimate on my laptop yesterday. I
installed a couple of programs from CDs and eveything was working fine.
Tonight I installed a driver for the LightScribe program and hadn't
installed the program first. I now can't use my DVD Drive. When I put a DVD
or CD in the drive the light comes on but nothing else. I can't see my DVD
Drive in Device Manager or in...
|
|
5 |
122 |
|
|
geluid by
sandra
Ik vindt het geluid dat uit mijn computer komt maar niks en wilt mijn
computer op mijn audio-installatie aansluiten zodat in goede geluid krijgt
van mijn muziek die ik op de computer hebt.Kan iemand mij uitleggen hoe ik
dat voor elkaar krijgt?Bvd
|
November 25th 07 11:10 AM
by sandra
|
0 |
169 |
|
|
Very chopping video and sound by
Sandman691
I am having some serious difficulties trying to get the Hauppauge
HVR-1600 to work properly with my system. The graphics and sound is
very choppy or gives acceptable performace. You never know what you'll
get. MCE will recognize the card but I get a blue screen after a few
moments that says video lost (never any video or sound). On WinTV2000 I
get either hit or miss, the chop or descent...
|
February 10th 08 06:58 PM
by JW
|
3 |
153 |