|
|
Fatal Mistake. by
Trinity
I believe i made a fatal mistake when I upgraded my memory recently. I went
from 2 GB of PC3200 to 4 GB of PC4000. After the upgrade Vista had seriuos
issues and would not boot at all. I removed Vista and tried a clean install
but it seems the it does not care for my new memory, I keep getting error
messages when I boot about critical failures and non Paged memory. I had
hoped the Blue...
|
September 12th 06 08:27 PM
by Trinity
|
6 |
253 |
|
|
MISSING DVD /CDRW DRIVE by
Loaner
I did a clean install on RC1 today and everything went well. Everything works
fine except one thing. I CANNOT FIND MY DVD ROM. I put a DVD in the DVD Rom
and nothing happens. I've been to device Manager and tried everything but the
drive is not being detected. Please help.
I have a Gateway 610 XL Media center PC. Pentium IV, 3.0 GHs, 2 GB DDR
SDRAM,
200GB HD Ultra ATA 800 MHs...
|
|
1 |
190 |
|
|
MISSING DVD ROM DRIVE by
Loaner
I did a clean install of RC 1 today and everything went well. Everything
works except that I cannot find the DVD ROM Drive. I put different DVD's
into the Drive and nothing is detected. I've been to Device Manager and tried
everything and still no detection.
I have a Gateway 610 XL Media Center PC with 200 GB of Ultra ATA HD, 2 GB of
DDR SDRAM , Pentium 4, 3.0 GHz Processor 800 Mhz...
|
September 13th 06 05:07 AM
by Loaner
|
0 |
176 |
|
|
hp Photosmart 7960 by
Ed
Can you get the 3310 to work wireless? The printer so far is working but
scanner no way , any idea ?
"Harold" wrote:
the 64 bit system.. also I found out if you play around a little any 64 bit
drivers will work for the printers...I also have a c4180 photosmart (all in
one), the printer will sork but the scanner wont.. Im still working on that
one...
|
September 13th 06 07:09 AM
by Ed
|
0 |
147 |
|
|
hp Photosmart 7960 by
Ed
the 3310 all in one printer works wireless on the last rc1 version but the
scanner and any other service will not. Any ideas? anybody with an wireless
scanner driver that will work?
"Harold" wrote:
the 64 bit system.. also I found out if you play around a little any 64 bit
drivers will work for the printers...I also have a c4180 photosmart (all in
one), the printer will sork but the...
|
September 13th 06 07:10 AM
by Ed
|
0 |
135 |
|
|
x64 drivers for Brother HL-2070N by
SGSCOMPS
Looking for Vista x64 drivers or configuration/setup information to use in a
networked configuration, not USB. Works fine with XP x64 but would like to
get it working with x64 Vista
|
|
0 |
162 |
|
|
Creative RC1 Drivers by
mikwiz
Has anyone heard when or if Creative will release RC! drivers to download for
XFI 64bit and Audigy 2 Advanced MB laptop 32 bit. Has anyone ever heard of
Audigy 2 Advanced MB that comes with a Dell Inspiron 1405 laptop?? Does
anyone know why Creative sucks??? What is a good Creative alternative to
Creative soundcards on 64bit desktop and 32 bit laptop????
--
Buddha Bless You
|
September 13th 06 01:19 PM
by Ted F
|
1 |
159 |
|
|
Fujitsu SnapScan by
eopiela
The driver for the Fujitsu SnapScan line of scanners is incompatible with
Vista and when I contacted Fujitsu technical support to inquire about a
workaround/updated driver, they indicated that none was available and none
was planned. This relatively expensive scanner is going to be a brick under
Vista, and I anticipate many law office users of the scanner won't upgrade
once they discover...
|
September 13th 06 02:18 PM
by eopiela
|
0 |
163 |
|
|
Generi RNDIS Driver issue by
Sam
Tried installing a new WM5 device (HTC TYTN) and kept getting a message that
the generic RNDIS driver was missing. Vista will also not install ASync. Any
clues??????
|
September 13th 06 03:10 PM
by Sam
|
0 |
180 |
|
|
Mouse issues after clean install & Updating by
Tim Starid
I have Beta 2 installed currently. I was experiencing problems with my mouse
clicking 2 times when I clicked it once, or at least effecting the objects it
was clicking. I decided to reisntall before placing RC1 on, thinking I had
screwed this up myself.
I completed a clean install, and went in to complete windows updating. It
notified me I had one update to isntall, so I installed and...
|
|
0 |
187 |
|
|
Upgrade to RC1 by
George Spiro
Hi,
I am having trouble to get my drivers for my SATA to upgrade my current BETA
2 installation on my M400 Tablet. I am looking for the storage drivers for
my SATA. Which seems to be a ICH7 Intel but I cannot find them anywere was
anyone able to by pass this?
Thanks,
G.
|
|
6 |
180 |
|
|
When Screen Resolution is enlarged the desktop Scrolls by
Micah
Alright,
I have a Dell 600m Laptop. It has a ATI Radeon 9000 64MB video card.
Currently if I go above 1024 x 768 Resolution the whole desktop is no longer
in view and Vista then does some werid scrolling. Now I pretty sure this is
not vistas' fault. It must be something to do with configuration. Something
else that is werid is that 4
Monitors show up in device monitor. Since this is a...
|
September 12th 06 11:57 PM
by Micah
|
1 |
206 |
|
|
When Screen Resolution is enlarged the desktop Scrolls by
Micah
Alright,
I have a Dell 600m Laptop. It has a ATI Radeon 9000 64MB video card.
Currently if I go above 1024 x 768 Resolution the whole desktop is no longer
in view and Vista then does some werid scrolling. Now I pretty sure this is
not vistas' fault. It must be something to do with configuration. Something
else that is werid is that 4
Monitors show up in device monitor. Since this is a...
|
September 12th 06 11:57 PM
by Micah
|
1 |
182 |
|
|
Hp DC7600 by
Andy
Just installed RC1 ong a HP Dc7600 with Realtek HD audio.
My problem is that I can't get any sound. When I look in device manager, all
i find under Sound is "High Definition Sound".
On the control panel Sound it says that sound is working, but I can not get
any sound out.
/A.
|
September 13th 06 07:20 AM
by Andy
|
4 |
209 |
|
|
Audigy 4 + rc1 by
AJASAUR
I've got an audigy 4 card and for the life of me i can't get it to work with
rc1. I've tried the beta drivers from creative and the xp 64 pro drivers with
no luck.
Has anyone out there got there audigy to work and how did you do it?
|
September 13th 06 12:06 AM
by Dm00ney
|
5 |
284 |
|
|
Aero & GeForse 6600 by
KeithO
Okay, I know the guys in the States have nothing to do with Pacard Bell
BUT.....
I have a PB Easynote W7621 laptp. PB do not have any drivers for Vista at
all, as far as I can see on their web site. Although Vista downloaded the
updated drivers for my GeForce 6600 (256MB) and now my system runs fine in
all resolutions.....
How do I get it to run Aero?
|
|
3 |
196 |
|
|
Out of Range - 36.3Khz / 34hz - ATI X1900XTX by
Beta Tester
Clean install of Vista 64 Bit RC-1, and experience problems at the very end
of the install. All files are loaded and no issues reported until the end.
The screen just turns blank.
Reboot machine, and it says Windows did not load correctly and do you want
to start in Safe Mode
The screen displays the error:
Out of Range 36.3Khz /34Hz
|
|
2 |
168 |
|
|
Which USB driver are ReadyBoost ready? by
David Sherman
http://blogs.msdn.com/tomarcher/archive/2006/06/02/615199.aspx
Is there a list of ready Boost Drive? or exact specs for these
drives?
thanks
|
|
1 |
207 |
|
|
HP scanjet 4600 in RC1 doesnt work (no driver) by
Jason
I have an HP scanjet 4600 and am having problems making it work in RC1. It
worked fine in Beta2 though.
There doesnt seem to be any HP software that works in RC1 even though the
win xp software worked in Beta2. The OS originally used the driver for win
xp which worked fine before. Now it gives an error when I try to use it even
in the windows fax/scan ui. It can do a preview scan but if I...
|
September 13th 06 07:20 AM
by Loaner
|
1 |
190 |
|
|
Generic RNDIS Driver by
Sam
Tried installing a new WM5 device (HTC TYTN) and kept getting a message that
the generic RNDIS driver was missing. Vista will also not install ASync. Any
clues??????
|
September 13th 06 03:11 PM
by Sam
|
0 |
180 |