|
|
Compaq IJ300 (Lexmark Z11) by
brianto
Everything works fine since I installed Vista except for my printer a Compaq
IJ300 which is a Lexmark Z11 in disguise. I installed the driver for the Z11
through the "Add Printer" but the problem arrises when I try and install my
black cartridge. ( You have to change the colour to black). When I press add
new cartridge ie black ,everything is ok but when I go to allign it, the
program states...
|
September 15th 06 01:32 PM
by brianto
|
1 |
923 |
|
|
Does anyone have a dial-up modem that works on Vista? by
H#
"dkisling" wrote:
I had the same problem USR5699- Usr tech says they only had two new models
with Vista drivers- I didn't try to edit the new models drivers etc. Instead
I dug out all the old modems (5) I had and tried them all until I found a
cheapo I bought 3-4 years ago from CompUSA- their private label version from
PCTEL model FS-LEC -SKU 274406 I bought for about $25 it's a...
|
September 15th 06 01:51 PM
by H#
|
0 |
304 |
|
|
GPU help by
Horseman
Hi Thanks spooner I was nearly going back to xp when I came upon your post I
also have a 3438 amilo and it was working on beta 2 but I did a clean install
of rc1 as beta 2 had saved all my old windows xp and therefore there was not
enough space to install I thought that it would be ok, but had your problem
at least now my dvd works and the screen is a reasonable resolution, but I do
not get...
|
|
0 |
170 |
|
|
GPU help by
Horseman
Sorry should have said thanks Spoons Cheers Dave
"JW" wrote:
Have you checked to see if their are any recent updates to your MOBO BIOS?
What driver are you using when you try and do the update?
What driver release does Vista try and install if you ask it search for a
driver on your system disk partition?
"Spoons" wrote in message
|
|
0 |
179 |
|
|
OEM DVD RW Suddenly Gets Code 39 on driver by
JW
Worked for me as well. I have a NEC DVD ND-6500A that was showing a
corrupted driver until I deleted the filter values. Now it works fine.
"Bones" wrote:
That fix should work. I've already used it on a few systems.
"BurrWalnut" wrote in message
...
|
September 15th 06 04:53 PM
by JW
|
0 |
178 |
|
|
NOBODY having problems with ATI beta drivers? by
Josh
I have a Radeon X1300 256MB PCI-E and when I use the Microsoft drivers my
computer starts up black... When I use the ATI drivers... well.. they don't
even install..
Anybody know what the problem is? Device Manager shows an X1300 but it shows
a question mark for VGA Controller :(
|
September 15th 06 07:29 PM
by Josh
|
0 |
181 |
|
|
NOBODY having problems with ATI beta drivers? by
Josh
I have a Radeon X1300 256MB PCI-E and when I use the Microsoft drivers my
computer starts up black... When I use the ATI drivers... well.. they don't
even install..
Anybody know what the problem is? Device Manager shows an X1300 but it shows
a question mark for VGA Controller :(
|
September 15th 06 07:29 PM
by Josh
|
0 |
192 |
|
|
Hauppauge WinTv 878/9 WDM by
Aran M
i am trying to get the above card to work with windows vista windows update
has said that it has found the updates for that file and the company says
that it is compatible with vista, but when i do the updates from windows
update it throughs and error code at me #80070002 so i click help and it
tells me to go and do all thease things which i have done 4 times and still
the same results, so i...
|
September 15th 06 08:14 PM
by Aran M
|
0 |
162 |
|
|
Windows vista RC1 Does not accept my EAX1600PRO video card by
Claudio Santos
Hey.
Does anyone encountered or has some ideia why is windows RC1 does not send
any image at all to the video card??? the last he shows is always the
windows date and that progress bar that windows has at start then he just
gets black and no more images....funny that i succed in instaling windows...
had to change to other video card to test windows vista RC1 but i really
want is my Asus...
|
|
0 |
161 |
|
|
wdm usb standart audio driver? by
olli
hello,
i got a tv usb stick from terratec. it is called prodigy. in my device
manager there are 2 entries...one works with a bda driver...i think it is for
the picture. but the other is not working. at the properties i see it needs a
standart usb wdm audio driver but windows can´t install its own because the
installation failes and on the official cd there seems to be no useful
driver. can...
|
September 15th 06 09:51 AM
by olli
|
0 |
275 |
|
|
Vista does not recognize ram by
ddelta
I have 3 gigs of ram installed and my bios registers all physical ram, but
vista only recognizes 2 gigs
|
September 15th 06 07:10 AM
by ddelta
|
0 |
237 |
|
|
VISTA ICANDY and no Support FOR INTEL MotherBoards by
Jon Acord
VISTA RC1 32 Bit / 64 Bit both provide no support for my PCI Video slots on my
Intel® Server Board SE7525RP2. I did a clean install on my 64 bit PC (both
32 bit and 64) using my NVIDIA PNY 7600 GT PCI Express card 2 Gigabytes of
DD2 RAM.
Keep in mind folks that this setup works fine with XP Professional 32 bit
and 64 bit, which I am forced to run as we speak due to VISTA's inability to...
( 1 2)
|
|
10 |
334 |
|
|
Ati Drivers RC1 Bad??? by
camesenin
I install last drivers of Ati for my X800 All in Wonder later the screen
turned blue and the system froze ( no text just blue). I reset the computer
but just as it was to hit the desktop it turned blue again and froze so I
restarted in safe mode and rolled back.
My Performance Rating is 1
not working the drivers of ati for RC1, not working the drivers for ati of
windows update.
|
|
7 |
174 |
|
|
Graphic Driver Issue (X800GT AGP) by
Anthony LiPetri
I'm having a problem installing the Standard VGA driver for RC1. The error
message I get basically says that Windows had a problem installing the VGA
driver and the reason for it is that it cannot be found. I don't recall
deleting anything from the install, and the ATISMBus driver that downloaded
before through Windows Update is nowhere to be found. Can anyone help me?
|
|
0 |
177 |
|
|
Dell Printers by
Alan H
I have a new Dell All in One 960. Works great on XP. No support in Vista.
We need more driver support, Microsoft. :)
|
|
2 |
179 |
|
|
Wrong memory detected on GeForce 7900GT by
Armando Arroyo
I have a GeForce 7900GT with 256Mb, Vista RC1 detects my Videocard as having
520Mb, of which it says 248Mb are Dedicated Video Memory and the rest
(271Mb) are System Shared Memory. Can this Shared Memory be disabled so the
Videocard only reports the onboard real memory?
|
September 15th 06 05:53 AM
by Peter M
|
1 |
212 |
|
|
radeon, viewsonic and vista display problem by
Chris
I have the same problem, where it seems like the monitors won't quit trying to
re-sync so the screen just keeps going black, then back to the desktop, then
black, etc. etc. every few seconds.
This has been happening on my system since Beta 2 and I have an Nvidia
7800GTX card (so not just an ati problem) and my monitors are both Viewsonic
G220fb's.
If I unplug my Viewsonic monitors and plug...
|
September 15th 06 05:12 AM
by Chris
|
0 |
201 |
|
|
mouse doesn't work in Vista by
Christopher Ellis
"Greg Hudson" wrote:
Windows Key Go to computer via arrows right-click key Manage Computer
(or something of the nature) Tab around the window that pops up until you
get the focus of the left pane, then go down to device manager.
Hope it work for you. :)
G'Day Roadking.
I've got exactly the same problem, except I'm using a MS serial mouse.
It *WAS* working during install, but as...
|
|
0 |
200 |
|
|
mouse doesn't work in Vista by
Christopher Ellis
"Greg Hudson" wrote:
Windows Key Go to computer via arrows right-click key Manage Computer
(or something of the nature) Tab around the window that pops up until you
get the focus of the left pane, then go down to device manager.
Hope it work for you. :)
G'Day Roadking.
I've got exactly the same problem, except I'm using a MS serial mouse.
It *WAS* working during install, but as...
|
|
0 |
203 |
|
|
Sync Outlook 2003 with QTEC S200 Windows Mobile 2005 by
Roger
Hi all
I had big hope, that in Vista RC1 synchronisation between my QTEC S200
(Windows Mobile 2005) and Outlook 2003 would work. But when connecting via
USB to the PC the Sync-Center shows only the QTECs Memory (internal & SD
Card), but not the Phone itself. The memory can not be configured.
Synchronizing Sound from within MediaPlayer 11 works fine.
Could it be, that synchronisation with...
|
September 15th 06 09:17 PM
by Roger
|
0 |
172 |