|
|
No Audio Device after Computer Resumes from Sleep State by
George
When my computer resumes from its sleep state (STR), the Sound Device is
gone. I have to reboot the computer to get it back. I have a Gigabyte
965P-DS3 (rev 2) mother board with a Realtek ALC888 HD codec chip. I used
the latest Realtek HD software which is version 1.56. This is a newly built
computer with a clean install of Vista Home Premium.
I reverted back to the drivers Vista...
( 1 2 3)
|
|
22 |
475 |
|
|
After installing raid0 system hangs by
George
After installing two 300gb velociraptors the system hangs in a strange
way.The mouse can move around ,I can use the start menu ,but the apps I run
never run.I have to reboot.It is too often ,any suggestions ?
Configuration windows home premium 32bit Asus p5premium mb Intel 9300 quad
and 4gb 1600mhz ddr3.
Thanks
|
October 2nd 08 02:31 PM
by George
|
0 |
241 |
|
|
Lost a drive d: by
George
Hello all
I have a raid 0 array and a third disk I use for backup.While playing with
Intel storage manager 8.5 drive d: disappeared. I can find it in bios and in
device manager but not in My computer even using command prompt.
Any ideas ?
Thanks
George
|
|
1 |
196 |
|
|
raid 0 "error occured" by
George
What is this ?
I run chkdsk and found no problem. I marked the disk as normal using Intel
storage manager and it runs fine.
Still I worry.
Any suggestions?
Thanks
|
|
1 |
214 |
|
|
Installing vista on raid 0 by
George
When do I need to give the driver for the array ?
Will the installation ask for it or do I need to press a key like xp ?
Thanks
George
|
|
1 |
206 |
|
|
Adding two disks raid0 by
George
Is it possible two add two new disks in raid0 on an existing windows vista
home premium 32 bit installation and how?
Thanks
George
|
|
3 |
214 |
|
|
More than 4gb ram by
George
I have added 2 more gb ram.Vista home premium 32bit reports 4gb ,but using
various applications I see 3072 mb ram.Is there a problem ?
Thanks
George
|
|
2 |
255 |
|
|
Vista burning feature not recognizing its own disk by
George
I only use Vista built-in burning feature to backup important files. I’m not
interested in burning movies, music, make bootable disks, etc. I have only
one DVD that I use all the time until it is full. The problem is when
occasionally I want to add a few more files to the DVD, Vista generates this
request:
"Windows can’t write to the disk you inserted.
Please insert a writable disk into...
|
July 18th 08 07:54 PM
by George
|
0 |
116 |
|
|
Problem with Front Panel of Realtek HD Manager by
George
I am experiencing a problem with Realtek HD Manager Front Panel in Vista Home
Basic.
Back panel has three buttons:
Blue=Line In (Line In)
Green=Front Speakers Out (Speakers)
Pink=MicIn (Microphone)
Then: Front Panel has two buttons;
Green=Headphone (Speakers)
Pink=FrontIn (FrontMic) – This is my problem…
Now the question: How do I change front pink to MicIn Microphone instead of
|
March 31st 08 12:45 AM
by George
|
0 |
169 |
|
|
Microsoft wireless keyboard 7000 by
George
I cannot use the keyboard when the computer boot and access the bios.
Anyway to get in the bios with this keyboard ?
Thanks
|
January 11th 08 02:11 PM
by Malke
|
1 |
137 |
|
|
Vista changed my floppy drive to drive "B" by
George
i have been using Vista Ultimate for quite some time it seems now and
suddenly last week I noticed that my floppy drive is now named drive "B". I
have checked in my BIOS and that appears to be correct and I can't figure out
how to get it back to being drive "A". I know there is little use for them
these days but I tried to create a floppy for Seatools to run a diagnostic on
one of my Seagate...
|
February 22nd 07 06:55 PM
by AndersT
|
5 |
291 |
|
|
I have a problem with my Video Card by
George
Hello!
I have a Video Card ATI Radeon A9200SE. I can't using Windows Areo because
there is a problem with my ATI Control Panel . I have Windows Vista
Enterprise. Can you give me some solutions where can I download drivers for
my video card or download ATI Control Panel. When I go to control panel, and
Problem Reports and Solutions there is a problem with my Video Card... It
says:
"Windows...
|
April 25th 07 02:43 PM
by JW
|
2 |
152 |
|
|
plug and play by
George
My Vista doesn't recognice my card reader or panansonic digital camera, and
error message of code 28 shows up. Help.
|
|
0 |
109 |
|
|
|
|
3 |
141 |
|
|
Vista Sync to Axim X51 in Windows Mobile Device Center (WMDC) by
George
I am at wits end!! I had no luck with an IPAQ 4350 mobile 2003 device, so I
bought an Axim X51 mobile 2005 device and still no luck. I just get ERROR
and not connection between them. It is not a USB problem as the drivers load
for Axim, and WMDC tries to connect, but get ERROR. I have done uninstall,
reinstall and nothing. Dell says it is MS problem and that patch will be
coming. I see...
|
August 22nd 07 03:02 PM
by Julio
|
1 |
101 |
|
|
SATA drives correct jumping 150/s or 300/s ? by
George
Hi,
I, running Vista Ultimate on a 3.40GHZ Pentium-4 PC with 2GB of RAM
All my drives are SATA, my primary "C" drive is a WD360 Raptor 10,000 rpm,
my second and third drive are Seagate Barracuda 7.200 RPM.
When accessing my secondary drives, Vista is slow. I have both Seagate
unjumped (300/s) and I wonder if this is the correct setting or should I
install
the jump to lower to 150/s?
|
|
3 |
135 |
|
|
|
September 27th 07 01:18 PM
by George
|
0 |
96 |
|
|
DVD Hang by
George Mathias
I have 2gb ram laptop, with "DVD Super Multi DL " now when I use a 8gb DL
DVD my system gets hanged, I tried using it by enabling readyboost but no
effect, why is my 2gb ram laptop getting hanged with an 8gb DL DVD
George
|
|
2 |
254 |
|
|
system restore not working by
George Mathias
hi, on my friends laptop vista home basic, while trying to restore the system to previous points one gets an error stating "restore was unsuccessful, no changes have been made, please try again"
In such a case what would one advice to do,
And why it is showing such an error, possible causes.
--
George Mathias
|
|
9 |
236 |
|
|
system restore after installing new software by
George Mathias
in case if I install a new software, and later use an older system restore point, will I be able to come back and restore the system to the point when I installed the new software, will it show up on system restore.
--
George Mathias
|
November 9th 09 10:51 PM
by peter
|
2 |
186 |