|
|
Problems using iPod Shuffle with Vista by
ajh
Firstly, although the iPod installs OK Media player doesn't recognise it as a
media device so can't be used. I'm sure I could do this on an earlier build.
Secondly using iTunes (7 although from what I have read elsewhere, this
doesn't seem to be a version specific issue) I can't do much at all. iTunes
recognizes it OK but a restore or sync will fail (unknown error 1418) and
disconnect. Also...
|
September 27th 06 07:47 PM
by ajh
|
0 |
174 |
|
|
Problems using iPod Shuffle with Vista by
ajh
Firstly, although the iPod installs OK Media player doesn't recognise it as a
media device so can't be used. I'm sure I could do this on an earlier build.
Secondly using iTunes (7 although from what I have read elsewhere, this
doesn't seem to be a version specific issue) I can't do much at all. iTunes
recognizes it OK but a restore or sync will fail (unknown error 1418) and
disconnect. Also...
|
September 27th 06 07:48 PM
by ajh
|
0 |
187 |
|
|
Problems with iPod shuffle by
ajh
Firstly, although the iPod installs OK Media player doesn't recognise it as a
media device so can't be used. I'm sure I could do this on an earlier build.
Secondly using iTunes (7 although from what I have read elsewhere, this
doesn't seem to be a version specific issue) I can't do much at all. iTunes
recognizes it OK but a restore or sync will fail (unknown error 1418) and
disconnect. Also...
|
September 27th 06 07:49 PM
by ajh
|
0 |
178 |
|
|
Belkin F5D7001 Drivers? by
Arve
I also have the same card. At first i could not see my accesspoint, only 5 or
6 other network in my building. I tried the belkin driver but got the
'invalid inf file' error.
The current chanel of my accesspoint was set to 12 at the time. By changeing
the chanel to 2, the accesspoint suddenly appeared in Vista.
I could also connect to the internet after a while. But now the connection
is super...
|
September 27th 06 08:41 PM
by Arve
|
0 |
304 |
|
|
U3 thumb drive doesn't work by
Micahman74
This is what I know but also as far as I've got...
1: You need to have launchpad intaller set to autostart
2: You have to remove password protection (at least while you are doing this)
3: Plug the drive in, launchpad will try to run, popup informing you that
launchpad is not compatible and option to check for update.
4: Choose yes, IE launches and you are informed that a software update to...
|
September 27th 06 08:53 PM
by Sean
|
1 |
867 |
|
|
Any solution for mass storage controller issue? by
nibby
I can see from the posts that a few of us are having a problem with the mass
storage controller. So far I'm unable to use my USB external hard drive or my
memory card reader that is built into my laptop.
Does anybody have a work around or solution to this problem yet?
Cheers loads
--
Why can''t everything just work first time?!?
|
September 27th 06 09:19 PM
by nibby
|
0 |
254 |
|
|
Vista Driver for Intel 82801FR SATA RAID on 925X Chipset by
ADAM
hi guys. I have a qustion where can i download an update for my 82801FR SATA
RAID controller to be version 6.0.11.x? I currently have version 4.5.0.6515.
"Arrow" wrote:
Hello Bill,
I asume you've tried the F6 once the installation begins? By the way I
needed to start my PC with the Vista DVD inside, to start from scratch, so I
was able to use F6. The initial start of the...
|
September 27th 06 11:18 PM
by ADAM
|
0 |
208 |
|
|
andLinux PreBeta and Vista by
LordDavon
Hello,
My name is David Solomon and I am the founder of andLinux. andLinux is a
native Linux distribution that runs seemlessly in Microsfot NT based systems,
which means no configuring, dual booting, partitioning, etc. andLinux has
around 10,000 active users.
I am readying the next version of andLinux and am testing it against Vista,
but the testing is failing. The problem is with one...
|
|
0 |
184 |
|
|
Problem with Novatel Merlin U730, cingular connection manager, & V by
Dowtown Jon
Using build 5536, when I get done installing the cingular connection manager,
reboot and then put my Novatel card in my pc card slot, I get a blue screen
core dump.
If I try and reboot with the card in the notebook, I still get a core dump.
basically I cant use my WWAN card with Vista :-(
Notebook is HP NC8430, specs on request.... appreciate any help.
|
|
0 |
175 |
|
|
samsung q1 sound driver and cd drivers by
AKASORA
has anyone found a way to install the drivers that came with the cd? when
try to install it it gives me a offline screen message. then i try to install
all of them individualy, but it fails to do so as it launches a chain
installer. the soundcard also does not work on vista i have contacted SRS
labs but they failed to contact me back. i installed the card once it worked
for about 10 min....
|
September 28th 06 01:02 AM
by AKASORA
|
0 |
180 |
|
|
SAMSUNG Q1 AND CD DRIVER SOFTWARE by
AKASORA
has anyone found a way to install the drivers that came with the cd? when
try to install it it gives me a offline screen message. then i try to install
all of them individualy, but it fails to do so as it launches a chain
installer. the soundcard also does not work on vista i have contacted SRS
labs but they failed to contact me back. i installed the card once it worked
for about 10 min....
|
September 28th 06 01:03 AM
by AKASORA
|
0 |
150 |
|
|
Control Panel Error by
MikeP
Has anyone received this error at start up? Solution?
"hd audio control panel for vista has stopped working"
Onboard Realtek HD Audio on Intel D915GAG motherboard.
|
September 28th 06 01:24 AM
by MikeP
|
0 |
167 |
|
|
wireless, wi-fi, drivers, connection by
Matt M
Try upgrading the firmware on the router. I have a linkys WRT54G and that
worked for me....
"Sid" wrote:
Hi, sorry to jump in on this thread...seems the most appropriate place for me
to come rather than setting up yet another wireless query...
I have an Acer 800 with an Intel 2200BG card which absolutely refuses to
connect to my wireless network although it will see it in the...
|
September 28th 06 02:19 AM
by Matt M
|
0 |
171 |
|
|
deleted WDDM drivers, can't get them back! by
Tim_Mac
hi,
yes i feel a bit stupid... i was pleased to see Vista had the option to
delete the driver software when you uninstall a driver, so i tried it out on
the Microsoft ATI WDDM driver before changing to the ATI catalyst driver to
see if i could get glass.
the catalyst driver didn't work, and now i can't revert to the WDDM driver
either. what's more, i have extracted the install.wim file from...
|
|
5 |
180 |
|
|
|
September 28th 06 02:20 PM
by Mario
|
2 |
309 |
|
|
ATI RADEON MOBILTY X600 by
Curtis
this graphic card is not registering properly and is saying that there is no
video memory and is regiersting as a genteric video card please figure out a
way so that it works with laptops as this poses a problem for users of it and
there is no work around for it as the manfacture of the laptop does not carry
the drivers for the lastest version of it includeing the beta drivers for...
|
September 28th 06 02:28 PM
by Curtis
|
0 |
162 |
|
|
rtl8187 vista drivers by
LAURENT
i have an asus motherboard with a realtek 8187 wifi card which does not work
with vista 32 bit rc1, please help!
laurent
|
September 28th 06 02:45 PM
by LAURENT
|
0 |
297 |
|
|
ATI Radeon x1600 PRO AGP 8x 512 mb Ram W/ Vista 5536 by
nscrnbr27
I tried vista 5536 but I am still stuck with the Graphics Card Crashing
resulting in me not being able to fully installing vista.
I have to disable the device. According to the hardware compatibility that
my system meets the recommendations by far. I heard switching the agp texture
size from 512 down to 256 will work....My motherboard does not support
switching the agp texture size so I am...
|
September 28th 06 03:01 PM
by SUAT
|
1 |
404 |
|
|
ATI Radeon x1600 Pro PCI-e on X64 5384 by
SUAT
Hello.
The ATI drivers for Vista RC1 is a real sorrow for my Radeon X1600 Pro 512
MB graphics RAM AGP 8x, too. It gives 4 bit color horizontal stripes during
booting such that I cannot see anything on screen. After waiting a couple of
minutes I type in my password blindly and press enter. I then see the
desktop. But I cannot open Control Panel nor Device Manager to uninstall the
ATI...
|
September 28th 06 03:34 PM
by JonK
|
1 |
257 |
|
|
enabling one desktop across multiple monitors by
worldzfree
Hello,
I have a Dell GX280 with a built-in Intel 82915G/GV/910GL Express Chipset
Family that supports two monitors. I recently installed Vista RC1 (5600) as
a clean install and everything went fine.
When the desktop comes up I see a mirrored desktop on my two Dell 1709FP
LCD's. When I go into the dislay properties one of my displays is listed as
greyed/not attached. If I right-click...
|
|
2 |
451 |