|
|
No native Vista drivers for ATI Radeon 9000? by
Torben Gundtofte-Bruun
Hi all!
Is there no native Vista driver for the ATI Radeon 9000 Pro 128MB?
I've looked at www,ati.com (and ati.amd.com) but the only Vista driver pack
is "catalyst_8-31-100_vista32_rc2" which doesn't include the 9000 cards. My
computer gets a rating of 1,0 because Vista doesn't detect any RAM on the
card. (Other components get ratings of 2,6..4,8.) But I don't think the
graphics card is the...
( 1 2)
|
November 11th 06 02:34 AM
by JW
|
10 |
269 |
|
|
Microphone does not stay muted in vista! by
Topo
Hi,
I have this problem in vista that is quiet annoying. I know how to mute the
microphone in audio playback devices to stop the annoying feedback however
everytime I restart vista it goes back un-muted and I have to mute it again
manually. I have vista ultimate sp1 and Creative SB Audigy soundcard. The
Audigy driver does not have an independent mixer control and everything else
works fine....
|
May 6th 08 04:16 PM
by Topo
|
0 |
129 |
|
|
NVRAID 1 and RC1 by
Toph
I'm attempting to install Vista RC1 cleanly to my computer. I have 3 SATA
drives in my NForce4-based PC.
1 SATA Drive is standalone, while the other 2 are in a RAID 1 array using
the onboard NVRAID controller. I am unable to see ANY drives, even after
loading either the XP, Beta 2 or RC1 Nvidia drivers for the RAID controller
in question.
Has anyone else had this issue? Thanks!
|
September 10th 06 05:44 PM
by cyanna
|
5 |
484 |
|
|
General Failure - during pings by
topazviper
Randomly my internet connection would drop off and it didn't appear to be a
router issue. I setup a ping 192.168.1.1 -t and randomly I get "general
failure".
Is there a way for me to see exactly what is happening? Am I losing
packets, or is my driver bad?
|
|
0 |
116 |
|
|
Installing from cd suddenly hangs !! by
top secret
Hi there ,i have been sitting with this problem for a while , running
vista + sp1, the problem is , while installing games on my system , the
game will install but only to a point then it will stop . just hangs at
the same place and there it will stay , most of my games.
PLZ i need help with this annoying problem :cry:
--
top secret
|
December 1st 08 03:39 PM
by Dick D.
|
4 |
295 |
|
|
HP LaserJet 3150 Fax / Printer Driver by
Top
I two have the HP 3150 printer and it is dead in the water for right now. To
take note on the below issue, Microsoft does not write drivers for these
products. The product manufacturer (HP) makes a driver that is a "basic"
driver to run out of the box. The Mfg then writes a driver with all the
functions for the printer/etc. I know this does not help, but blame HP, they
are the ones that...
|
November 23rd 06 12:25 AM
by Gary H
|
1 |
180 |
|
|
Touch screen add on kit with vista. by
tooextreme94
I have a magic touch 17" add on kit so I can use my finger with some
programs. It worked perfect wtih XP pro but now when I plug it in vasta
installs it automatically. The software is for xp that I have and the company
disconniued support for my touchscreen. the touch screen responds to my
finger but it is no calibrated. the mouse curser is 2" away friom my finger
when I touch the screen....
|
|
2 |
104 |
|
|
NEW HARDWARE FOUND by
TONYSOPRANO99
I can't get my computer to keep from running the new hardware found program.
It shows an unknown device to install. Every time i reboot it does this. All
my devices work fine, but this message keeps popping up. Any suggestions? I
am running windows vista home basic.
Thanks
|
|
6 |
133 |
|
|
Vista doesn't see dat on SATA USB Drive by
TonyP
I have a SATA Drive that I pulled out of a Windows 2003 server. I put it in
a USB drive container. When I plug it into an XP machine, I can see all of
the data. When I plug it into a Vista PC, I don't see any data. Is there
some security setting or something that I need to change?
|
|
2 |
135 |
|
|
|
|
1 |
153 |
|
|
Sata Drivers - New Hope! by
tonya
I am running Vista Beta 2 build 5384 using an old MSI motherboard. When I
installed Vista, my SATA onboard drivers stopped working (Promise FastTrak
376 type), as did the third IDE port. No amount of reinstalling drivers
worked. Then I came across an IDE card from Maxtor called the SATA/150 which
was in the box of a new HD I bought for my daughter. Out of curiosity, I
installed that on my...
|
August 29th 06 10:09 AM
by tonya
|
0 |
606 |
|
|
Promise FastTrak 376 ? by
tonya
I have trouble with this controller on my MoBo as well (an aging MSI Neo).
By chance, I stumbled over a Maxtor SATA/150 card that is an IDE PCI card
with 2 x Sata and an IDE socket as well. Installed it with XP drivers from
Maxtor's site, and lo & behold it works. I'm running Vista B2 build 5384.
Hope this helps! Tonya From Norway.
"Jim Willsher" wrote:
Hi,
|
August 29th 06 10:15 AM
by tonya
|
0 |
694 |
|
|
external HDD enclosure probs by
Tony97103
I am trying to transfer files from my old computer hard drive using an usb
2.0 enclosure. My new computer is running Vista, the old hard drive is
running xp. When I plugged it in, my computer sees it as a mass storage
device, but I cannot access nor see any files on the old hard drive. I'm
getting kinda frustrated, I tried to link the two computers via ethernet that
didn't work. My old...
( 1 2)
|
|
14 |
341 |
|
|
IPAQ 6910, Vista RC1, Office 2007 by
Tony Thijs
Hi,
Does anyone has experience with the newest IPAQ 6910, Vista RC1 and Ofice
2007 tech refresh. I want to test the combination.
Kind regards,
Tony Thijs
|
|
0 |
165 |
|
|
8000 mouse transceiver by
Tony Linguini
I bought the mouse for my tablet which already has bluetooth. I know this is
a stretch, but couldn't I use the transceiver to add bluetooth capability to
another computer? Problem is it shows up by itself as a mouse. Suggestions
appreciated. Thanks.
|
|
0 |
148 |
|
|
Printing with Vista/IE 7 to HP photosmart 7350 by
Tony H
I have downloaded the generic driver from HP and can print everything except
items from web pages.
I have to copy into Word and print from there (which works fine but is a
pain).
I can also copy to PDF files and print OK from there.
|
May 29th 07 05:58 PM
by Tony H
|
2 |
119 |
|
|
How to bridge from a HTC device to a lan and the Internet etc? by
Tony
Hi,
I want to connect and establish a network bridge from a HTC 710s or HTC
Touch with Windows Mobile 6.0 over WiFi or Bluetooth to a LAN connection in
Vista and connect with the internet Live messenger over the LAN instead over
the expensive GPRS connection.
a. Is there a standard way to bridghe over Bluetooth and WiFi Windows Mobile
6.0?
|
June 18th 07 05:49 PM
by Tony
|
0 |
230 |
|
|
AC97 vista problem by
Tony
Hi,
I experience major problems with getting a AC 97 system up and running under
Vista.
I have a Gigabyte sinxp1394 Mobo with AC97 chipset and Vista ultimate. I
upgraded the driver with the realtek 6.0.6243 version I downloaded from
Realtek.
Recording turned out to be impossible in an erratic way. Nor the build in
sound recorder, The Microsoft media 9 encoder or Adobe Audigy see the mixer.
|
|
1 |
123 |
|
|
Inaccurate System Time/Clock (running slow) by
Tony
I bought a new laptop from bestbuy the other day. Everything is running well
except for the system clock. System time will be running slow, 10 sec in
every 15 min. So the system clock kept on drifting off . The accumulation in
a day will be around 10-20 min. OMG!
I've tried to sync the time via internet, then shutdown Vista, and return to
BIOS. I've been keeping an eye on it for one and a...
|
|
1 |
137 |
|
|
ReadyBoost - Can the USB drive be left in the system for restart? by
Tony
Why do you need to re-plug the USB again? You just leave the USB disk there
and set up the readyboost for once, then everytime you reboot it, it uses
readyboost automatically.
"HeyD" ????
...
Hey,
The question is, can the USB drive or for that matter any flash drive
be left in the computer and have ReadyBoost just see it...
|
|
1 |
213 |