|
|
Can't adjust 'wheel tab' or '3rd button' by
Medic2002
Just upgraded to Vista today, I usually use my middle button on my laptop to
scroll up/down pages, when I try to use it to scroll up now, nothing happens
and if I use it to scroll down, it opens up a seperate application that will
move the page in whatever direction I move the pointer. I would really
rather just scroll up/down instead. When I open the Mouse Properties, there
is nowhere to...
|
|
1 |
155 |
|
|
Finding Used Memory Address Space; Maximum amount of RAM by
[email protected]
Is there any way to find out what portion of my memory address space
is free, or how much has been used up?
Essentially I want to find my system's maximum amount of addressable
physical RAM, before I buy more.
If it makes a difference, Memtest 86+ reports my 2x1GB sticks as
2048MB. However, task manager says 2045MB and Control PanelSystem
says 2046MB. Computer reckons I have 2.00GB. Does this...
|
|
4 |
204 |
|
|
PVR3000 and Vista 64 by
gbbsoft
I have Vista 64-bit with PVR3000 Delux.
I install all fixes, newest driver from Leadtek site. I have newest
WinFast PRV2 and... nothing. I don't see anything in PRV2. I try other
programs and... only one program is working: VirtualDub (1.6.17). Maybe
because it is 64-bit program, and all others as 32-bit. Any suggestions?
On maybe I should wait for newest driver/pvr3?
--
gbbsoft
|
|
4 |
185 |
|
|
No sound on Vista by
BigMonsterGirl
New computer - Compaq Presario with factory installed Vista Home Basic. I'm
using the speakers from my old HP Pavilion - Polk Audio. I can get sound
through them, it's just very, very faint. Is this a driver issue? I've
looked in my device manager and the installed driver is a Realtek HD driver.
I've been to the audio manager and troubleshot it every which way - no
solution there.
Any help...
( 1 2 3)
|
April 15th 07 08:09 AM
by Jack K
|
20 |
483 |
|
|
Movie Maker 2.6 by
Cal Bear '66
Windows Movie Maker 2.6 for Vista
Movie Maker 2.6 is for Windows Vista users whose computer cannot run the Vista version of Movie Maker.
To test if your computer can run the Vista version of Movie Maker:
|
April 15th 07 05:11 AM
by Brian
|
2 |
167 |
|
|
I deleted the dvd/cd rom icon from the "Computer" window... by
John Murphy
...and can't get it back. I think there may be a bug in Vista. Twice now,
when drawing the cursor across an Icon in the "Computer" window, the cursor
has picked up the Icon and when it slid under the frame of the window, the
file and/or device disappeared from the computer. It did not go into the
trash. It just vanished. In the case of the file, I was able to restore it
from a removable...
|
|
3 |
150 |
|
|
Disable auto detect of multiple monitors? by
WayneLiv
I have my Vista Business notebook connected to a KVM switch with a 20" LCD
monitor attached. When I select the notebook on the KVM I have a dual screen
display with the notebook display and the external LCD.
Every time I select a differnt PC on the KVM, Vista on the notebook auto
detects that the external display is gone and resets the display settings to
a single display.
Is there any way...
|
|
0 |
148 |
|
|
Vista not Recognizing CD or DVD Disks by
stu
Hi,
I ran both the beta and RC1 with no problems. I have the following 2 drives
in my machine:
Toshiba DVD-ROM SD-M1102
TSST corp CD/DVDW SH-W 162Z
They both worked correctly prior to installation of the retail version of
Ultimate. Vista recognises both drives and states that they are both working
|
April 15th 07 03:29 AM
by Phitur
|
7 |
172 |
|
|
Can not populate my secondry Hard Drive? by
Sameh
I can see my secondry hard drive, in the device manager, but when I try to
populate, it gives me the message that no information is found.
Also I can't see this drive on my computer, although it was there during
installation of windows Vista Home Premuim.
|
|
3 |
150 |
|
|
Disable Wireless on startup by
Pascal Flo
Hi,
I have an Acer Aspire 9420 with Vista home premium. Each time I startup,
wireless is on even if the laptop is connected to network with ethernet
câble. How can I automaticly disable wireless when a network cable is
connected OR disable wireless on startup and turn it on with the switch on
keybord ?
Many thanks,
P.
|
April 15th 07 02:07 AM
by DanR
|
2 |
149 |
|
|
Dual monitor by
Andreas
I upgrade a dual-monitor PC from XP to Vista ultimate. The second monitor
doesn't work and a message says that a non-compatible VGA driver was
disabled. The operational device is Nvidia Geforce 6600 which works fine
although the resolution is lower than before, and the non-operational device
is Nvidia Geforce2 MX/MX400.
I guess the problem is not the inability of Vista to support...
|
|
1 |
128 |
|
|
No Standby after MS Laser 6000 mouse by
Sam Steinhauser
I just switched my mouse from a MS Wireless Explorer 2 to a MS Wireless Laser
6000 mouse. I already was using Intellipoint 6.1. Everything works great but
my system won't turn off the monitor or go into standby. It has always
promptly went into standby. Iuninstalled Intellipoint and reinstalled so I
ocould choose the 6000 during setup. I have change the power settings,
restarted several...
|
|
2 |
125 |
|
|
Trouble with a Canoscan LIDE 70 Scanner by
Cris Halbert
I have already talked to Canon Technical Support and have had no
success. I have uninstalled and reinstalled the Vista 32bit drivers for my
scanner and it is detected and device manager reports it running with no
errors. I am running Vista 32 Ultimate. The moment I go to scan anything with
it, it starts to scan, freezes, then errors out. I have tested the scanner on
a Win XP machine and it...
|
|
1 |
140 |
|
|
vista seems very sensitive to hardware changes by
tonj
I don't know if its me but my vista software throws a major tantrum if I fit an additional hard drive. I find invariably that it
wont boot. I can run a repair from the CD but it seems silly to have to do this. Windows XP and earlier versions just found the new
drive during the boot and added it as another drive letter but after fitting an additional hard drive vista gives me an error page
that...
( 1 2)
|
April 14th 07 10:22 PM
by Liz
|
12 |
292 |
|
|
USB Hardware Unresponsive After Sleep--But Update Doesn't Help!! by
Velcroman
The problem: My MS Keyboard, Receiver, and Remote Control periodically vanish
after waking from hibernation--usually after the SECOND time it hibernates, I
think, oddly enough. I use the IR blaster in the receiver to change channels
on my TV, so I can't record shows with Vista MCE when this happens.
The USB Stack Update purports to fix this exact problem, but it doesn't!
I've tried...
|
|
4 |
215 |
|
|
|
April 14th 07 08:29 PM
by Robert
|
0 |
159 |
|
|
Blue Screen while shutting down by
Hassan AlDoy
I've got Vista installed on an HP Pavillion AMD Turion 2.8 Ghz and 4 GB Ram.
I need to know to what does this error belong? which device is causing the
blue screen with error about nvm60x32.sys
Please advice
|
|
2 |
134 |
|
|
What is the ATI Northbridge Driver? by
Ivan Samuelson
I have the Visiontek Theater 550 MCE video card and I'm using the latest 7.1
drivers for Vista. I noticed that there is the Catalyst driver, the Theatre
550 Pro drive and an ATI Northbridge Driver.
If I install the Northbridge driver, it causes my mouse and other USB
devices to no longer function, so I don't install it.
Is it necessary? Here is my hardware setup:
ASUS A8N-E Motherboard with...
|
|
5 |
147 |
|
|
How to remove duplicate device drivers? by
Tyler Cobb
At some point unknown to me, possibly after a BIOS flash, I ended up losing
my network device object in Device Manager and in its place I now have a
"Network Device #2". The whole #2 designation alone was enough to drive me
nuts, but now the original Network Connection icon of "BellSouth.net" (my
ISP) is also gone and in its place is "Local Area Network 3". When I try to
rename LAN3 back to...
|
|
2 |
145 |
|
|
Problem with scanner and Windows Photo Gallery by
Glenn Shaw
My brother is having problems with his scanner and Windows Photo Gallery.
He has a Canon CanoScan N670U USB-powered flatbed scanner connected to his
PC, which is running Vista Home Premium. He has installed the latest Vista-
compatible drivers and software for the N670U, and has verified the
installation in the Scanners and Cameras Control Panel.
However, when he tries to scan an image into...
|
|
2 |
180 |