|
|
Hard works on USB but not on Firewire by
Pgo
I have an Iogear ION Tri-Select hard disk. The drive works fine when I
connect via its USB connection. But when I connect by Firefire (IEEE 1394)
it does not work.
Under RC1 the device manager showed a driver error and would not let the
drive work.
Under RC2, the driver error is gone, but when asked to populate info on the
drive, it returns an error.
(1) How do I report the problem to...
|
|
2 |
147 |
|
|
Dell 3007WFP and nVidia 7950GX2 by
Mark W Scheidell
I just installed these two new pieces of hardware. I was under the
impression the Vista drivers for 7950GX2 didn't support SLI. Maybe I
misunderstand what SLI is all about but I was prepared for not being able to
get the full 2560 x 1600 resolution. Was under the impression this was only
possible if Vista could see both GPUs and that required SLI.
At any rate I'm glad it works - and to...
|
|
0 |
153 |
|
|
5.1 Sound in Vista. Yes! Finally by
Mick
5.1 Sound in Vista RC1 build 5600. Yes! Finally!
High Definition Onboard Audio: SIGMATEL STAC 92XX C-Major HD Audio. Audio
heaven.
Dell XPS/9150 dual core.
I have a complete total package using all kinds of DVD burning software.
The sole exception is Google Earth. Dang!
|
October 14th 06 12:07 AM
by CM745
|
5 |
187 |
|
|
Reformatting after install by
RandySavage
I am also having a problem going back to XP. The drive won't format in the
text-mode portion of Windows XP setup/install.
The error message is:
"Setup was unable to format the partition. The disk may be damaged. Make
sure the drive is switched on and properly connected to your computer. If
the disk is a SCSI disk, make sure your SCSI devices are properly terminated.
Consult your...
|
|
0 |
162 |
|
|
Geforce Go 7300 on Asus A6jC by
Andrea Casini
I just wanted to report that my Geforce Go 7300 worked fine with Aero all the
way to RC2 where the driver is reported by Vista of been incompatible. I wish
i could be sure i'll work fine on final release because otherwise i won't by
the upgrade license and i think many other people would agree with me. The
thing is that the upgrade Advisor marks this video card to be compatible with...
|
October 14th 06 05:12 AM
by Ilan
|
1 |
191 |
|
|
Sound Card by
Deniz Selçok
I have a sigmatel high definition audio sound card. ý can use my xp driver
on vista. sometimes ound is great but sometimes sound is very bad cýzzzzz,
cýzzzz. what is this. please help me...
|
|
0 |
134 |
|
|
What is clicking? by
Clark
My computer, since RC1 it seems has been "clicking" about every 10 minutes
or so, but I don't know what it is. The sound is like a relay being
activated and seems to be coming from the front where the drives are.
It doesn't seem to be the same sound as when the video mode changes, but it
might be related. I will try to find out exactly where it is coming from,
but I look a little strange...
|
October 14th 06 11:55 AM
by Clark
|
9 |
174 |
|
|
Mobile Device Center Problems by
Dan swartz
I recently updated my RC1 to RC2 and downloaded the Mobile Device Center
(Beta 3) package from he
http://www.microsoft.com/windowsmobile/devicecenter.mspx
My problem is when I run the installer nothing happens. I double click it
and it looks like it will run but nothing ever happens.
I am logged in as a user with Admin rights, I re-downloaded the installer,
and I tried it on 2 separate...
|
October 14th 06 02:02 PM
by MICHAEL
|
6 |
230 |
|
|
ATI TV-WONDER 550/650 - VISTA fails to boot, even from install DVD by
Cwagz
Has anyone else experienced this problem?
I have been running Vista RC1 and RC2 since the day they were released. I
like Vista so much that I decided to make it my sole OS on my 2 computers.
Also, I wanted to start playing with the Media Center functions so I went and
purchased an ATI "Vista Premium Certified" tuner card, the new TV Wonder 650.
I put the card in an open PCI slot in my...
|
October 14th 06 02:13 PM
by JW
|
2 |
145 |
|
|
drivers for Pixelview PV@3000 by
rahul mundra
Dear Friends,
Does RC1 support Pixel View PV@3000 TV Tuner card as i am unable to find a
driver for the same.
Rgds,
Rahul
|
|
0 |
154 |
|
|
Vista RC1 Sync Center fails to Setup by
Rich
I have a i-Mate Windows Mobile 5.0 K-Jam device that is recognised from Vista
RC1 and is correctly presented in the Sync Center and Mobile Device Center.
When I select "Set up" from the Sync Center menu or via a Right-Click on the
device nothing happens and the partnership setup fails to be completed.
I've updated with latest updates, tried different cables and different USB
ports with the...
|
October 14th 06 04:15 PM
by Monk58
|
1 |
130 |
|
|
|
October 14th 06 05:33 PM
by Alejo
|
1 |
135 |
|
|
asus A7N8X by
gsf1200
I have an asus A7N8X mobo, ethernet will not work with vista rc1. Ethernet
controller shows up in device manager with no drivers. Tried asus drivers,
nvidia mobo drivers (old and new versions of each) Still no ethernet. I
installed an old pci ethernet card and installed drivers, still nothing! It
works fine with mepis linux, so its not a hardware problem. I then installed
on another computer...
|
|
4 |
154 |
|
|
|
|
2 |
128 |
|
|
No sound by
Scanner
Hello. Today I'v upgraded from XP to Vista RC2, and now I got no sound...
I don't know the specs on my PC, and since HP don't have them posted on
their site I don't know what to do really.
(Device Manager)
I think this is my soundcard...
Other devices: Multimedia Audio Controller
It's strange, since the microphone input seems (havn't tried though) to work:
Sound, video and game controllers:...
|
October 14th 06 10:59 PM
by Scanner
|
0 |
125 |
|
|
copy and past by
Don M.
When I try to copy a few of urls to notepad to save for later use. When I
right click to open the dropbox where the copy and paste command is located
at I cna't highlight the copy button so that I can copy and paste the
urls.Also when I go to a site has a joke or something that I would like to
save I can hold down my left button and high all of the jokes and then click
on paste to a soecial...
|
October 14th 06 11:38 PM
by MICHAEL
|
1 |
156 |
|
|
Screen Shot of Vista Monitor Problem by
Amazaun
I installed RC1 last weekend, ended up loosing everything and starting over.
I'm gonna give RC2 a shot. Biggest problem is that when the setup was
loading, the display was skewed and it flashed like a slowish strobe light.
It was impossible to read to see what kind of info it wanted. My monitor is
an Envision LCD EN9110. Video card is Nvidia GeForce FX 5200. Obviously I
couldn't...
|
October 14th 06 11:51 PM
by Amazaun
|
2 |
138 |
|
|
|
October 15th 06 12:44 AM
by kajrav
|
1 |
125 |
|
|
How do I hook up my Xbox 360? by
Pinkshirtbadman
Sorry if this is percieved as a dumb question, but I'm kind of new to this
I'm waiting arrivel of some RAM and a new TV Tuner card before I install
Vista RC, but had some questions so I can get things wired msot easily before
I get everything started.
I'm a little confused on how I need to manage my setup.
basicaly the main thing I am looking forward to doing is recording live TV.
I currently...
|
|
1 |
181 |
|
|
Broadcom driver installation error by
tantebootsy
Hi,
I get the same error-message, though it's XP I try to install the
driver on. I've got the problem, that I doesn't have a
"c:\windows\inf\setupapi.app.log" or "setupapi.dev.log" on my system
where I could look, if files are missing.
Mark, maybe you could just say to me, which files were missing in your
scenario, maybe I'm lucky and it's the same missing on my system ...
|
|
0 |
149 |