|
|
Toshiba M200 and Vista by
David Eitan Poll
Has anyone been able to get everything working on the M200 in Vista? I run
into problems when trying to use the tablet in presentation mode, in that it
will not output to an external monitor unless the monitor is connected when
the tablet is starting up. The other problem comes when trying to resume
from sleep. The monitor doesn't turn on, but if I hold down the little
button that turns...
|
February 1st 07 08:58 AM
by awgneo
|
2 |
134 |
|
|
Unknown device messages for generic volumes by
David Edwards
I have a rather annoying display of new hardware messages that appear when
Vista first boots. They can never find the appropriate driver, and if I ask
for the new hardware to be ignored in future, the computer will then fail to
boot in Vista. I have tracked these to the disk partitions on the second
drive. The device manager lists three Generic volumes and three Unknown
devices under Storage...
|
|
2 |
165 |
|
|
SigmaTel High Definition Audio CODEC by
David E
Hello! Possible bug follows:
I just recently installed RC1 and it was pretty smooth--except for the
sound. While it runs mostly out of the box and I can not record anything
using my microphone. At first it used some generic driver (Microsoft High
Defintion Audio.. something like that) and after fiddling with it I think I
was able to get it to use the updated driver from Windows Update to...
|
September 8th 06 05:23 PM
by Jeff
|
2 |
528 |
|
|
New AVC-3610 Driver Causes Blue Screen by
David DeLella
After installing the new RC1 release of Windows Vista I proceed to test my
machine setup with my Adaptec AVC-3610 Dual TV Tuner. This is listed as one
of the supported devices on the Vista requirements page. In beta 2 and 5536
there were no related issue with setting up this device. In RC1 the drivers
installed however when downloading the update from Microsoft through Windows
update the...
|
|
2 |
580 |
|
|
New AVC-3610 Driver Causes Blue Screen by
David DeLella
After installing the new RC1 release of Windows Vista I proceed to test my
machine setup with my Adaptec AVC-3610 Dual TV Tuner. This is listed as one
of the supported devices on the Vista requirements page. In beta 2 and 5536
there were no related issue with setting up this device. In RC1 the drivers
installed however when downloading the update from Microsoft through Windows
update the...
|
|
0 |
530 |
|
|
Cannot Sync Samsung Phone with PDA to Palm Desktop with Vista by
David DeFrain
I have an older Samsung phone (an SPH I330) with a built in PDA using Palm
OS. I've synched it with XP for years. It installs in a cradle and has a
USB connection to the PC.
I got a new computer with Vista, and this phone will not sync. In Vista's
Device Manager, there is an entry for "Palm OS Handheld Devices," with a sub
entry for a "Samsung Handheld," so it looks like there is some...
|
|
1 |
132 |
|
|
Vista RTM and Legacy Drivers by
David Cornelson
I've been downloading and installing nearly every release of Longhorn and now
Vista since the first CTP's. In every case I was able to "get by" with the XP
drivers for my AT&T Plug&Share wireless modem and the on-board ASUS P4P800
motherboard 3Com 3c940 ethernet adapter. These drivers worked on the most
recent RC2 installation.
Neither of these drivers will function (Error Code: 10) in the...
|
|
1 |
125 |
|
|
Wired or Wireless Adapter that Works with RTM? by
David Cornelson
I'm looking for a PCI adapter I can throw on my ASUS P4P800 motherboard that
will work with the RTM of Vista.
Anyone have something that worked without a hitch?
David
|
|
2 |
149 |
|
|
Vista RC1 5600 HP DVD 840 external not working by
David Buckley
I have a dell inspiron with a HP DVD 840 e dvd re writter. The Drive
reconises fine under windows xp but does not under RC1 5600 of windows vista
Does anyone no how to get this drive functioning under vista
|
|
0 |
143 |
|
|
DATA D drive? by
david boylan[_3_]
Hi could somebody explain how i use my DATA D drive . When i open MY
Computer i have a Acer C drive with 69.7 GB and a DATA D with the same
GB , it may seem a stupid question but i don't have a good knowledge of
computers
Cheers Dave
--
david boylan
|
|
3 |
133 |
|
|
Unknown Device. by
David Barratt
Hi all,
I've recently installed Vista Ultimate. Looking in the 'Device Manager' I
found an unknown device. Upon further inspection I discovered that it is for
my Mustek 1200 UB Plus scanner.
Under 'Hardware Ids the message is: 'USB\VID_05D8&PID_4002&REV_0100 and
USB\VID_05D8&PID_4002.
As I understand it there is no driver for this scanner yet. Can anyone
|
December 21st 06 11:43 AM
by Dave
|
2 |
1,168 |
|
|
WD SATA Drive configured by Vista as a SCSI Drive by
David Bailey
My hard drive seems to be working overtime and when I checked it in the
Device Manager I noticed its listed as a WD SCSI Disk Drive when its actually
an SATA drive.
Went to the WD Website and the same old story "Western Digital does not
provide technical support or drivers for our products installed under Windows
Vista because Microsoft has not finalized the operating system for public...
|
October 4th 06 01:58 PM
by Theo
|
3 |
273 |
|
|
New Vista Information Forum by
David B.
Thank you for spamming the groups AND not properly cross posting.
--
----
Crosspost, do not multipost http://www.blakjak.demon.co.uk/mul_crss.htm
How to ask a question http://support.microsoft.com/kb/555375
How to Post http://www.dts-l.org/goodpost.htm
http://www.db-pc.com
_________________________________________________________________________________
|
|
0 |
122 |
|
|
Use Motherboard Setup CD or Use Vista's Device Drivers? by
David A. Lessnau
I just installed Vista Ultra RTM on a new motherboard (ECS PX1 (1.0B) -- a
P965-based system). Without having used the motherboard's Setup CD, I have
no yellow-question-marks (or whatever the equivalent is for Vista) under
Device Manager. It looks like Vista found everything on its own and
installed working drivers right out of the box (OOB). But, should I accept
those drivers as the best...
|
|
3 |
147 |
|
|
Microsoft Wireless Mouse 6000 Scrolling in Quicken 2005 under Vista Ultimate by
David A. Lessnau
I just replaced my Microsoft Wireless Laser Desktop 6000 (mouse & keyboard)
with a Logitech Cordless Desktop because 1) I hated the Desktop 6000
keyboard, and 2) Microsoft's Intellimouse software prevented Vista Ultimate
from activating the screensaver with that mouse. After making the change, I
noticed that the mouse-wheel scrolling problem I'd been having in Quicken
2005 Premier had also...
|
|
0 |
168 |
|
|
hp LaserJet 1012 Works with Vista Ultimate RTM by
David A. Lessnau
I just wanted to let people know that, at least on my system, the hp
LaserJet 1012 (1010 series) does work (at least basically) under Vista
Ultimate RTM. I couldn't run the actual HP driver software since it faults
almost immediately under Vista. Instead, I just turned on the printer and
Vista looked for the drivers. It couldn't find any on its own, so I pointed
it to HP's install CD. ...
|
|
2 |
168 |
|
|
Dell Latitude D410 w/ Intel 915GM Graphics Chipset Display Problem by
David
Running Vista RC1 32-bit
System is a dell latitude d410 w. intel 915gm display chipset.
Problem is that the screen can only be set at a maximum of 1024x768 under
resolution for the PnP monitor and that it can not be increased to the native
resolution of 1280x1024 when using the pnp monitor, there is another monitor
listed, the default monitor and when selected it will allow me to change the...
|
November 5th 06 09:16 PM
by Mike H.
|
1 |
126 |
|
|
MP3 player not being read by
david
I have vista and WMP11 preinstaled on my new computer. I also have napster,
and it wont read any of my portable devices. I had no problems with XP but
when I plug in my MP3 player it wont read anything, just to safely remove
hardware. Any suggestions?
|
October 15th 07 03:38 AM
by Spirit
|
1 |
113 |
|
|
blue screen at startup by
david
I get bluescreen when i login it blinks 3 times the first one lasts about 5
sec. what could cause this
|
|
1 |
112 |
|
|
Dell Latitude D410 w/ Intel 915GM Graphics Chipset Display Problem by
David
Running Vista RC1 32-bit
System is a dell latitude d410 w. intel 915gm display chipset.
Problem is that the screen can only be set at a maximum of 1024x768 under
resolution for the PnP monitor and that it can not be increased to the native
resolution of 1280x1024 when using the pnp monitor, there is another monitor
listed, the default monitor and when selected it will allow me to change the...
|
September 12th 06 04:34 PM
by David
|
0 |
194 |