Hello everyone ! I am posting a problem seeming not to relate to Vista but I hope someone can help.I am using a Nokia N70 mobile music edition but when I transferred avi file to it , I could only here the sound ,no scene ( that ' s similar when I transferred video which had been converted from WMV to MP4 by total video convert )? -- daretofail

Hello, I have a dual monitor setup at home. I've enabled remote desktop on it so that I cannot connect to it from elsewhere. The dual monitors have different resolutions, one is an LCD, the other is a CRT. Whenever I remote desktop in, only a single screen is available, which is fine. The problem is, none of my mouse clicks register on the windows. I can use the keyboard to navigate windows...

Hi, I had two hard drives, both 120gb and HHD(D:) just disappeared with no reason. http://img171.imageshack.us/img171/4858/70798746uo0.jpg] rescan disk and refresh do not help. any suggestions? thanks in advance!

I have an old Winterm 3000 series (from around the year 2000). I can connect to a Windows 2003 server using an RDP connection. However, when I try to connect to Vista Untimate using RDP remote desktop I get an error message: Client and Server versions do not match. I assume this is referring to the version of the RDP protocol ( I believe Windows 2003 uses RDP protocol 5.2 and Vista uses RDP...

I upgraded to Vista about a month ago and since then my computer (used as a PVR) just keeps crashing. It is not even crashing with a blue screen, it just completely shuts off. After one of these crashes, I can't just power the PC back on either, I have to disconnect the power supply, flip the power switch, reconnect the power supply then boot. I'd swear it was just a HW problem myself but...

That's what command powercfg -devicequery wake_armed tells me when I run it after the machine wakes from Sleep. Bizarre! Anyone else seen this? TIA. Gary

I seem to be having a problem with my wireless driver on a lenovo T61. The fault bucket is above, any ideas?

I'm planning on building a new computer. I was thinking of of using a couple (RAID 0) of SSD for my boot partition (C), and a large RAID 5 ( 2 TiB) for my data partition (D). Assuming my motherboard is not EFFI and my boot partition is MBR, can I format my RAID 5 with a GUID Partition Table (to get around the 2 TiB limit of MBR) and put an NTFS file system on it? Are there tools in the...

I've got an XBox controller for Windows, a wired one, but for some odd reason all for quadrants are lit up and flashing on and off, I have the drivers installed from Microsoft and this never happened before.....as I am looking at it, it is still flashing and I don't know why, it used to only have one quadrant lit permenantly....from previous Vista intalls, but since my latest it is now flashing...

I am not sure what happend to my computer but it is stuck in a reboot loop. I just received my computer on September 30th from dell. I am running Microsoft Windows Vista SP1 Home Premium Edition. here are some additional specs Inspiron 518, Core 2 Quad Q6600 (2.4GHz, 2x4MB) 3GB DDR2 SDRAM,800MHZ- 2X512MB,2X1GB,DIM,M Radeon HD 2400 Pro Graphics Media Card 500GB Serial ATA II Hard...

Hi all...So I've let my laptop overheat several times, and all of a sudden, I found it to be slow! As molasses. I ran some utilities (PC Doctor 5 which ships with all IBM/Lenovo Thinkpads), and that gave it a passing grade! So I run my trust tool "PC Wizard", and even when I have it plugged in, turn the battery scheme to "Maximum Performance", PC Wizard only ever displays 997.45MHz anymore. No...

BUILT THIS SYSTEM WITH THESE SPECS HERE ARE MY SPECS: CPU: AMD ATHLON 6400 WINDSOR M/B: K9A2 PLATINUM RAM: CORSAIR XMS2 DHX 4GB (2 X 2GB) 240-PIN DDR2 SDRAM DDR2 800 (PC26400)

does windows media center support s-video input? i have a AVerMedia M150-D and i want to play X-Box through my computer :) -- thepizzaman

ha blue screened me can anyone help my system is OS Name Microsoft® Windows Vista™ Ultimate Version 6.0.6001 Service Pack 1 Build 6001 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name BOB-VISTA System Manufacturer System manufacturer System Model System Product Name System Type x64-based PC

I just did a clean install of Vista 5744. It did not load my ethernet driver or my sound driver. I pointed it to the previous Vista install directory (RC1, 5600 I think) and it was able to install them. I want to wipe clean the HD that I installed RC1 on to reclaim the space (Vista is installed on my primary boot drive now), so could someone please tell me what folder I would need to save...

Hi, for months I have been trying to solve this problem, I have a HP pavillion labtop with an integrated Broadcom WLAN adapter, for some reason when im on my wireless connection I get a BSOD that says "IRQL NOT LESS OR EQUAL" i can only get a quick glance at the file displayed on the bottom "bcmwl16.sys" or something like that, now i have tried many things, uninstalling and reinstalling the...

I wanted to post an update: 1. I'm trying hard not to reformat, so I am exhausting all other options first. 2. I tried the latest ATI Catalyst v8.10 (driver only), and still experienced the same problem. 3. I installed the video driver provided by MS Update and it appears to be working much better. I will see how this turns out. With my older ATI 2600 card, the MS drivers didn't help, but with...

I bought the gaming receiver for windows and it worked fine until i bought a logitech MX518 mouse then it stopped working completely. When i plugged it in the green LED light did not come on and vista did not recognize anything. I have read that logitec drivers could stop it from working so i uninstalled the drivers and still nothing, i tried to use my PS2 mouse and still did not work. I have...

When I play a flashplayer video (eg. CNN) the synaptics touch pad scrolling quits functioning! I have: uninstalled and re-installed Flashplayer Updated synaptics drivers Any suggestions? Don

I recently got an Envision G2219w1 external monitor for my Gateway laptop running Vista Home Premium. Initially the monitor worked perfectly at the maximum 1680x1050 resolution. I used it for several hours, no problem. Then I put the laptop in hibernate mode and returned several hours later to continue my session. Now no matter what I do 1680x1050 is not offered as an option. 1600x1200 and...