http://www.redmondmag.com/news/article.asp?EditorialsID=7989 ss.

All, I got it working. After trying every other suggestion this is the combination that worked for me. I discovered that Windows Live One Care was shutting down the connection by setting my firewall to "restricted". I turned off my wireless, changed my firewall settings to NOT "Automatically change my firewall protection..." and everything started working.

Good Evening all. I just clicked on Start, All programs, Windows DVD Maker for Vista. It errors out saying that my Video dows not meet minimum requirements. I clicked on learn more and it tells me thaI need DirectX 9. When I checked my system, it tells me that I have DirectX 10. So what is the problem? What can I do to fix this problem other than buying a new video card? Thanks -- Doug

After many ill fated attempts to get this camera to work, I read here about new software from Logitech. I am running RC2 5744 and although a slightly quirky install, the camera now functions properly and big surprise, the mic is listed and functions great. The new driver is version10.0.4 released 11/21/06 with a driver date of 11/10/06.

I got Vista RC1 on Centrino2130, Samsung X50, 1,5GB ram If I start a DVD and choose the Media Center I got an decoder failure, on Mediaplayer it says that there isn't enough ram to play a DVD The Taskmanager is telling me that there are at all 1533MB physical ram, about 1000 all the time are in cache and ~40 free...why there is so much in the cache, how i can change this? The other~500mb are...

Hi, i've installed Vista on a test machine, and ther's a problem with the sound drivers. When i'm trying to listen a music or to have the windows sounds, i must connect my speakers to the microhpone connector. My motherboard is an Asus but the model y don't know because it's where i work. I'll tell tou that later. PS : excuse me for my bad english, i'm french =)

I'm still having the same problem the only solution is to restart..I've tried sleep mode and to disable and enable the sound driver but nothing works.... ANY SOLUTION GUYS ? "NightOwl" wrote: i had the same problem, so i finally gave up on the old sound max chip and bought a cheapish audigy sound card. havent had any problems since.

I have a 3380 connected to an XP computer using the PCL6 driver. When I try to connect to it using Vista I get an error saying the monitor is not supported. I loaded the printer drivers in Vista using the lpt1: just to see what is available and I find that only the PCL5 driver is available with Vista. Does anyone have any ideas about what to do to get my printer connected? -- regards, Mark

Hello, Does anyone know how to install the Creative Soundblaster live!5.1 on Vista? I'm running RC1 right now and it doesn't recognise my soundcard. I have searched the creative website and the microsoft website but haven't found a sollution yet. I hope someone knows how to do this, thanks for any information! Eduard

Hi, I'm getting a "parameter is incorrect" error when Vista Business RTM is installing ANY USB storage device, whether flash or HDD based. I've tried several of each and none work. It appears to find the device driver software and goes to install it and that's when the error occurs. Vista Business RTM was an upgrade to Windows XP Pro SP2, rather than a clean install.

I am using a HP ZV6000 (ZV6149EA) laptop under Windows Vista, but my soundcard: Conexant CX20468 - 31 AC97 Audio was not detected in the Device Manager. Now, there's a update available for my soundcard, but I can't install this because I get this error: -- Windows can't update important files and services while the system is using them. Make sure to save your files before restarting. --

Hello NG, the driver of the Cam installed proberly, but the cam doesn't work in MSN Messenger. The CD or the driver from the downloadsite - doesn't work, because - the installation ask for Windows XP - SP 2 or newer... Any ideas or comments, that the cam work?

anyone know when Nvidia will have RTM drivers for Vista? I see they still have RC2 ones available.. (or did i miss them on their site?) thanks

I have spent the last 4 hours trying to install Vista RTM on my machine. The upgrade didnt go well so i decided to blow it away and start fresh. I have an Asus A8V-Deluxe MB with promise 378 sata controller. I downloaded the drivers for my MB from ASUS and when prompted by the Vista install I put in the CD and pointed to both the 2003 and xp drivers. None of these showed my drives. Is there...

What is Page Fault error? What could be its possible reason(s)?

Having installed the RTM release on my Samsung Q1 the Microsoft update identified a Bluetooth update which I installed. During the install I was asked for the original Bluetooth CDROM, as this was a Microsoft update I did not have this. I've tried searching for driver s and letting Vista to try and resolve the problem, but I now have three hardware devices listed in device manager but unable...

I will be very happy to send some gift from Spain such as wine, some fine food etc to whoever will help me to solve this problem. So please read carefully. I have Inspiron 700m, BIOS 7, winth both Windows XP Professional and Windows Vista Enterprise on it. I connect it to Philips 180P2 LCD monitor , whcih has two inputs - either direct VGA cable or DVI and DVI to VGA cable. Under Vista, I...

I've connected my Treo 700wx to my desktop running Vista Ultimate and hear a "beep" when it connects. However, when I go to the mobile device center it doesn't show up. Any ideas? Andrew

I two have the HP 3150 printer and it is dead in the water for right now. To take note on the below issue, Microsoft does not write drivers for these products. The product manufacturer (HP) makes a driver that is a "basic" driver to run out of the box. The Mfg then writes a driver with all the functions for the printer/etc. I know this does not help, but blame HP, they are the ones that...

This is in regards to the Vista x86 I got from MSDN. I have an NVidia 7900GT wtih a Viewsonic 22" that should be running native resolution at 1680*1050. I've installed the latest drivers from NVidia, the Viewsonic Vista Inf, etc & still get no native support. Is this some sort of crule trick being played by me. I have a 19" as my 2nd monitor & all is working there as intended. Any ideas?