Having an issue with adjusting the scroll speed on my Microsoft Laser Mouse 5000 on a vista laptop. When i do this by going to - Control Panel - Mouse Properties and then adjust the vertical scroll speed to fastest, i click apply and then OK to close the window. However, the scroll speed immediately reverts back to slowest, a fact made clear by both the actual slow scroll speed and by...

Hello! Just installed Windows Vista Ultimate Edition. Got one quite large problem. My external DAC, a Silverstone EB01, does not work that good. The internal soundcard on the motherboard works OK.... but with the DAC I get only noise after playing a MP3/Video for a while. The noise can dissappear after maybe 10-60 seconds. But it will come back after a few minutes.

Does anybody here know of a way to get a Compaq Aero 1530 to sync to Outlook 2007 under Vista? I suspect that it will require a driver of some sort since it connects via a serial port. ** Tom **

.... has anybody experiences which current hardware will be supported to get Dolby Digital 5.1 and DTS under Windows Vista RTM? Regards, Thomas

Hy, I'm using the recent Silicon Image x64 drivers for my Sil 0680 controller. Under XP I was working on a mirrored set (RAID 1) with 2 Samsung 120 GB drives. After installing Vista RC1 I can not access the RAID. Vista finds the two physical discs that it can not access, but it should find the one logical disc (the RAID set). Is there any known workaround to get my RAID 1 working?

I have 2 vista ready TV cards and after installing in the pci slot and restarting vista does not see them. I have tried to manually install but then I get an error saying the device cannot start(code 10). I have never had this problem unless the card was bad but they are not. 1 is the adstech instant hdtv and the other is the v-stream studio TV terminator with vista drivers. They both work in...

Operating System: Windows VistaT Ultimate (6.0, Build 6000) (6000.vista_gdr.070627-1500) Language: English (Regional Setting: English) System Manufacturer: americanfuture System Model: AWRDACPI BIOS: Award Modular BIOS v6.00PG Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 CPUs), ~2.3GHz Memory: 2046MB RAM Page...

Hi everyone. How’s everyone doing? Good day! -- thomasz Posted via http://www.vistaheads.com

hi, i have a "Corsair TWIN2X 6400 DDR2, 2048MB CL5 Kit w/two matched CM2X1024A-6400 Dimm's " and i wounder if some one know some good timings for this ram or shuld i use the standard timings which is " 5-5-5-18" the MHz of the ram is current : 848 MHz

hi i m going to buy a asus hd 3870x2 grapich card but i wounder if it would work with my k9n sli platinum? i think it is 1.0 pci e on that mobo and does any one know if you get less or more power on hd 3870x2 asuse , because there is two different version one with

hi. just changed motherboard to k8n sli platinum but now i cannot use my sata HDD , vista just wont boot when the disk is connected. it just keep on going forever in the boot up screen. but in linux , bart pe and other free dos program, it works just fine. i tried to formate it in all of these OS but still no way to boot in vista, i even cant boot from the vista disk with the HDD...

HI. i m looking for a news group for general hardware stuff, does anyone know which is the best news group?

Hi, I have a problem trying to restore data from a 750 GB WD drive installed in a USB/SATA enclosure. The drive worked fine in my previous notebook (which died) running Vista Business, but didn't appear in another XP machine. I don't know why. However, when I connected it to my new notebook running Vista Home Plus, under Disk Management it appeared as Invalid (not foreign or any other

I have a new Toshiba p100 laptop that came with windows media center, I just upgraded to the MSDN Rel of WIndows Vista Everything is good except the system BSOD on any media related activty including remote desktop The offending driver is nv4_mini.sys, I have made sure I have the lastest NVidia drivers that are posted 8.4.0.0

I have 2 GForce 8800 GTS card each with 640mb of memory on them. I have 4gb of physical memory. But when I goto my display settings I get this. GPU processor: GeForce 8800 GTS ForceWare version: 169.25 Total available graphics memory: 2431 MB Dedicated video memory: 640 MB System video memory: 0 MB Shared system memory: 1791 MB Video BIOS version: 60.80.20.00.02

This modem worked in Beta2 - but doesn't work in RC1. In RC1, it forces a blue screen reboot when activated. So I connected a US Robtobics USB modem from my wife's computer and no problem. But here is the weird part: While I was on the Internet, Microsoft upgraded my NetDragon as a Smartlink 56k. When I query the modem, everything is fine (it was assigned COM3). But when I attempt tyo use...

Has anyone gotten this to work in RC2?

Hi there, I have the problem, that all printouts are upside down. (Vista RC2) Every Workstation with no vista on prints correct. Does anyone know this problem? My Printer is a Ricoh 2022D. Thank you. --

I am trying to install an internal PCI dialup modem using the Hardware Installation Wizard. I get as far as selecting the driver and the next step is to select a port. However there are no ports to select from(Using Xp for example, the selection would have included COM1, COM2, LPT1, ...etc) What do I do now ?, Any suggestions or advice would be appreciated. Thanks in advance

I have an HP m8425f new with Vista SP1 and have just purchased a Microsoft wireless laser mouse 8000 which works fine with one exception. When I use Quicken I can only get the mouse to scroll in one direction vertically. When I turn the scroll wheel in either direction the Quicken screen will only scroll backwards and I cannot get it to scroll forwards. Any suggestions please?