I cannot print a pdf document from Adobe Reader 7.0.8 to my LaserJet 1020. The file seems to get stuck in the spooler. At least this is the status indicated in the printer window. I also cannot cancel/delete the file from the que. I cannot change the driver because the "New Driver..." button is greyed out/inactive. I downloaded the latest XP driver from the HP site but the EZInstaller ...

I have the same board and have the same audio problem. The only work around is to buy a cheap usb audio device. I got a Trust EAX2.0 and it does the job. "Robert Ludewig" wrote: I own the mainboard MSI K7D Master with the AMD 762 / AMD 768 chipset running two athlon MP 2000+. Are there working dreivers for the onboard sound wich is AC97 somewhere ?

Hi, Just wondering whether anyone has experience issue with DVD writer disappearing from Vista RC1 after rebooting. I have a Pioneer 111D installed with a Liteon CD/DVD combo. When I restart my PC, either from a cold or warm reboot, Vista can see my Liteon drive but not by Pioneer DVD writer. However, If I go into DEVICE MANAGER and perform a SCAN FOR NEW HARDWARE, the Pioneer DVD writer...

after restoring vista to a previous state, the voice recognition program comes up with the error " speech recognition could not start because the language configuration is not supported" it goes further to say that the recognizer language must match the language of the user interface. please change the language....but i can't and my mic system is working just fine, help please

Does anyone know if Silicon Image has a driver (sil3114 SATA Raid Controller Raid 0 & 5) for Vista? The XP Driver is incompatible and Vista is near final version, i think it's time for new Driver NOW!!!! THX Manuel -- ASUS A8N-SLI Premium (nForge4) AMD Athlon 64 X2 4200+

Anyone?anyone? I have two network printers I have got to get up and running. Walker

I have a LaCie Biggest F800. This is a USB2.0-connected RAID drive. I have three computers. Computer #1 runs WinXP Pro SP2. THis is where the drive was connected. It works fine there, formatted with NTFS, no security. If I plug it in to computer #2, which runs WinXP Pro SP1 it is recognized and works fine (automatically assigned a drive letter and is readable). This helps to confirm...

I have recently made the move from AMD based systems to Intel based systems and after an exhaustive case issue. I finally got the system up and running. I installed the x64 edition of RC1 (missed out on the RC2 downloads, but if someone wants to hook me up with the ISO image I would be grateful) and the install went off without a hitch. I downloaded the latest beta drivers from nvidia for...

This worked!!!!!!!!!!!!! Thank you thank you thank you!!!!!!!!!!!!!!!!!!!!!!!!!! "Alex" wrote: I have an HP computer and I found a fix that actually gives you sound. Found on PlanetAMD64: http://www.planetamd64.com/index.php?showtopic=23602 "Anyways, for Windows Vista x64 with Conexant/ATI Integrated Digital

Vista RC2 (X86) Original installation of RC2 detected WinTV USB2 and Windows Update installed an update. Media Center played TV and FM correctly (although audio was somewhat muted) Remote worked. Downloaded and installed all the lastest updates from Hauppauge's site. Rebooted and WinTV2000, WinTV32, and Radio applications worked (again somewhat muted audio).

Does anyone know the status of the Windows Mobile Device Center? The ActiveSync page says that this will be the replacement for ActiveSync in Windows Vista. When is the projected release date?

Any solution yet to WPA/WPA2 (TKIP) failure to connect? I have Intel 2200bg and Netgear WGR624v2, still unable to connect after installing Vista Beta 2 . .. . -- Jon

PS: It seems that since your monitor screen is black when connected to the built in video adapter, your bios has already automatically detected that another video adapter is installed. Try connecting the monitor cable to the new nVidia card and just booting up normally. If you have a built in video adapter, you must first disable it in the system bios and specify wheater you wish an AGP or...

Downloaded new Nvidia 96.85 x86 drivers and they will not load. I get an error msg stating that I am not running Windows Vista, even though I am running Windows Vista RC2 Build 5744 and video card is a Nvidia GeForce 6600 256mb video memory. I was really hoping that these drivers would work and gaming would be improved. I followed the instructions and turned off virus software and unloaded...

Anyone having luck with ATI Radeon Mobility 9700 drivers? I have tried the Beta drivers from ATI and the drivers that come with Vista. With either of these drivers installed the screen refreshes once per 5 seconds. Uninstalling the driver makes the system work pretty well - but they keep getting reinstalled by Vista when it detects no drivers are installed. System: Sager Laptop (can't...

I got the X800 XT AIW to work. Took me all day Saturday to figure it out...but I used to spend more time than that installing Windows 95 from floppy years ago =-) 1) Install the drivers and multimedia from the original x800 cd. 2) When the install fails and a pop-up askes to try it again using recomended settings click yes. 3) reboot 4)After install when it is trying to load drivers and...

3Com 3c905b-tx NIC not working under Vista RC1. Using dialup, I go to Windows Update. It recommends updating the driver for that card. It downloads the file, but when it tries to install it, it fails giving me the code 80070103. I can't seem to find the solution to this problem. I have disabled anti-virus, anti-spyware and firewall. No change. Anyone have any suggestions? Thanks!

As per the title. I'm currently downloading RC1, and it's going to take until tomorrow! Is there somewhere I can get RC2? -- Nigel M

I have a fairly new laptop with plenty of power to run Vista (PenIV 3.06); in fact, it runs quite well, and except for the lack of video card support, I would consider upgrading. However, ATI does not support my video chip and the drivers included with Vista (that I must load manually, since Vista does not, for some reason, recognize my chip) are very slow. Checking video performance with...

I was told via Email today that Adaptec has no plans to support Windows Vista in alpha, beta, RC or final stages until after 2007!!! So what can I do if I use the 1200A raid controller do I have to reformat my raid just to put this on? Surely there is adaptec support in windows vista as in XP service pack 1? Any info on the 2940UW SCSI Cards and ATA 1200A RAID controller is appreciated. I...