Hey guys, I was wondering if someone can recommend a decent video card to upgrade to. I am not a gamer nor do graphic design so when i bought my pc 2 years ago i went with a cheap card, works fine for me but obviously it won't do the trick for Vista as far as Aero goes. I have a GForce4 I guess must be a pretty old one cos obvoiusly Vista doesn't like it too much. I'm just looking form...

Does anyone know if these are on the way, I can only find the X64 and X86 Drivers on Nvidia.com. What is the main difference between x32 and x64. I downloaded x32 as I thought it would put less strain on my pc.

Vista appears to be incompatible with ess maestro 3i soundcards. Driver does not work properly even in compatibility modes. I can get it to work installing in compatibility for xp or 2000 but then as soon as computer is restarted, the sound card is not functioning once again. Does anybody know of any solutions aside from getting a new sound card. This is the only serious issue with vista...

There are 32 bit XP drivers that come with Windows XP Media Center Edition for my SA 8300 HD Cable Box. are there any Vista drivers (x86 or x64) for this device?

Hi there, I have the problem, that all printouts are upside down. (Vista RC2) Every Workstation with no vista on prints correct. Does anyone know this problem? My Printer is a Ricoh 2022D. Thank you. --

Hi all, I also have the no display after boot problem, i'm running RC1 on a 1.7GH'z Celeron Laptop, with 1GB Memory, for the most, it runs very well, system spec concidering. however, i do NOT have an nVidia card, like most people thatseem to have this error, I have a sis 650 chipset running an sis 315 graphics, using the drivers from Microsoft. where this gets interesting, is, if i boot...

mainbord: P965 (foxconn P9657AA-8RKS) it use the JMicron JMB361 Host Controllor to connect IDE drive, it recognized as SCSI controllor by windowsXP. the problem is i have 2 more SCSI cards connect to 3 SCSI hard disks, and at one time only 2 of the SCSI controllor can run normally in windows Vista. my system was installed in adaptec 2100s SCSI Raid, it works normal all the time.

mainbord: P965 (foxconn P9657AA-8RKS) it use the JMicron JMB361 Host Controllor to connect IDE drive, it recognized as SCSI controllor by windowsXP. the problem is i have 2 more SCSI cards connect to 3 SCSI hard disks, and at one time only 2 of the SCSI controllor can run normally in windows Vista. my system was installed in adaptec 2100s SCSI Raid, it works normal all the time.

I too have been trying to install my Strat Commander under Vista Beta and now Vista RC1. As yet no luck, although under Windows XP I had no problems at all. I have a feeling it might be something to do with the virtual keyboard driver that's preventing installation. If anyone does work out how to install it I would be very grateful to hear from you. "Ubbe" wrote: Hi gang

"Bad Kitty" wrote: This worked for me when my CD and DVD drives both did not show up in Computer: Start Run regedit navigate to registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318 Highlight it and in the right pane, find the Upperfilters and Lowerfilters

hi i have a smc cardbus smcwcbt-G the problem is that wen installing the driver is says : windows find the driver for your device but encountered an error attenpting to install it. The system canot find the file specified. I`m using windows vista RC1 build 5600

i tried 4 different microphones and none of them registered any sound at all at maximum sensitivity levels. what can i do to fix this? "JPG" wrote: I've done all of this as well and my mic is still very quiet. I have to use a very raised voice to get it to register.

I seem to have the same problem - Speakers are working fine, the line-in jack works very quietly on maximum level, but the microphone is not working at all. From what i gathered it's a problem with the VIA Audio driver that can not ehnace enough the incoming signal from the incoming jacks. VIA website does not have any audio drivers, the autoupdate of the driver by Microsoft says I have the...

I'd been really frustrated that there was no Windows driver available for this printer. No idea if Samsung intends to provide one at some point or not. That said, I saw in one of these groups where another user had simply loaded the old XP driver for a completely different Samsung printer, and it worked. I figured, it's a test system -- what the he**. Surprisingly, IT WORKS. Alas, this...

i have this board asus AN8-VM and im missing 1 Gig of ddr 400 on it, i have all four slots with the same ddr memory, any hints?

Hi, At first, Im french, so please excuse my reallyl bad english ! I've just download an install Vista RC2 but I have some trouble with my mainboard's drivers ! It's a P4P800 and the installation CD tells me that my system is "not compatlble with this software". I'd really like to test this new OS but without netword card...it seems to be difficult ! Is there anybody who have the driver vor...

Hi, I have installed Vista on a fairly old laptop - an Acer Aspire 1360 with onboard Graphics. All is OK initially, with the 'Standard VGA' adapter driver, and I am able to use the full 1280x800 widescreen native resolution. However, Microsoft now have a 'High Priority' update for me, which is the 'correct' display adapter driver. Unfortunately, when this driver is loaded, the max...

Hi! I have a Lenovo/IBM ThinkPad R60 and I'm wodering if Vista will run properly on this notebook. It labeled as " Vista capable". Does anyone have the same machine and is willing to help me out with information about Aero, performance index and occuring problems? Best regards, Holger

does anybody know how to download a vista lan driver without using windows update. my network card is not support in the RC, but i get information that i can update it to work after installing vista. But as it is my only card in the system, as the other Lan interface is not supported at all. So I ned to get the driver before hand. Regards Lars

I am using a Dell Dimension 5150 with an Intel 3.0Ghz Hyper Threading processor and 3 gigabytes of RAM. My two questions a 1. Would I be able to run the 64-bit version of Vista? 2. Is the 64-bit version of Vista more driver deficient than the 32-bit version? Thanks in advance for any help anyone in the group is able to offer. Regards,