Using Windows Vista RC1 Build 5728. Caonon MP390 Printer works great (even the print monitor software functions well). The scanner, however, is not recognized by any function of Vista and the Scanner Toolbox software from Canon cannot find the scanner. Any help from anyone would be greatly appreciated.

Using Windows Vista RC1 Build 5728. Caonon MP390 Printer works great (even the print monitor software functions well). The scanner, however, is not recognized by any function of Vista and the Scanner Toolbox software from Canon cannot find the scanner. Any help from anyone would be greatly appreciated.

Can someone point me to the location for the HP Photosmart printer drivers; specifically the C-5180? Thanks. Chris

I'm having an odd problem that I can't seem to get around. To be fair, the problem exists in XP as well. I am running RC1 on a Dell Optiplex SX280 Ultra Small Form Factor. Slick little box, but limited by its integrated 915 video. According to the white paper on Intel's site, this chipset supports 1080p (1920x1080). Unfortunately, the only choices I get are 1600x1200 and 1920x1200, both...

I am looking for printer drivers for HP Photosmart printers. Can someone point me to a location? And specifically looking for the C-5180. Thanks Chris

I have tried to run several applications and games that require directx (GTA2, Worms Armageddon for example) and I keep on getting a message on either the installation or when I run the game that I need directx 6 or above. I know that Vista RC1 has directx 10 and I have tried using directx 9.0c, and I even tracked down V.6, but each time the same thing happens. This is probably related to...

I have tried to run several applications and games that require directx (GTA2, Worms Armageddon for example) and I keep on getting a message on either the installation or when I run the game that I need directx 6 or above. I know that Vista RC1 has directx 10 and I have tried using directx 9.0c, and I even tracked down V.6, but each time the same thing happens. This is probably related to...

Does anyone know how to get TV-Out with this card without it interfering with the desktop? Its an S-Video output to the TV, and DVI to the monitor. If I leave it so only the monitor is selected, then I can change the resolution up to my usual 1280x1024. If I put the Clone to the TV, however, the desktop drops straight to 1024x768, matching the TV resolution, and refuses to change for...

I´d try to install the WDM-Driver under Vista, but between the installation windows hang up and give me a blue-screen with trouble. Did anyone now something about?

I have a problem with Vista RC1 Build 5728 I hope someone will be able to help me out with. Here are my machine specs: Apple Intel iMac 17", with ATI Mobility X1600, w/128meg dedicated video RAM 1.83GHZ Intel Duo-Core CPU 2GB RAM (two 1-GB sticks) 300GB Maxtor SATA-2 HD. (the largest HD sold with an Intel iMac is 250GB).

I have the same problem, did you find a solution?

After installing Vista RC1, I noticed my hard drive is making audible high pitched noises. The pattern of the noise is 1 second steady beep-like noise, then maybe .1 second silence. When I create disk activity, the noise alters or disappears. I did not have this noise when running Windows XP. I have a Dell Latitude D810 with a Pentium M 1.73 and 1 GB RAM. It is possible that it isn't the...

Hi, I am using an Asus A2D notebook with a Mobility Radeon 9600, which ostensibly is supported by ATi's Catalyst RC1 for Vista, however, while the driver installs successfully, it fails to load/initialise, and I am stuck with no 3d accelleration. The 'driver' provided by Vista also behaves the same way. I can only assume that this is because Asus notebooks are not supported by ATi (aparently...

Hi, I use Vista RC1 and a G550. With the driver that Vista downloaded automatically dual head did not work - which drivers should I use that works under Vista RC1? fup2: microsoft.public.windows.vista.hardware_devices -- Greetings Friedrich Stockhammer http://www.stockhammer.at/

Hi, I looking into replacing both of my 6600GT for a 7950, but I want to know how well it will work with Vista (RC-1 and retail) -- Thank you in Advance Merci a l'Avance

Hello everybody My webcam is only recognized as an audio device. Has any one been able to use this webcam as what it should be.... a webcam Thank you

Hi All, Running Vista build 5728 on a multi media laptop Qosmio F10 with 1 gigabyte memory and nvidia 6600 go 128mb, it runs great no problems except for the drivers for the multi card reader no drivers to install and find on the net, anybody have a solution for thisor a suggestion. If anybody have question about running vista on qosmio feel free to ask. regards, Acubens

I just setup the Vista Beta and am having a weird problem. Keep in mind in Windows XP what I am trying to do worked fine. I have my TV setup as my secondary display. When I installed Vista and hooked this up the TV only comes out in Black and White. Anybody else having this problem? I loaded the latest Catalyst drivers and I am still getting the same results.

I have a MSI K8NGM2-FID and can"t get past setup no matter what I do. Has anyone been able to install Vista RC1 on this motherboard? I have been able to install it on an NF3 and a NF2 build ,so it's not the dvds or the hardware, as I used the same hardware except for the motherboard . Any help? K8 board, 1gb of ram an 80 gb WD harddrive and a Lite-on DVDRW AMD 3500 cpu. Any help...

how do i find the plug-n-play ID for a Device? i'm supporting a driver request to microsoft so that they will include drivers for this one device in vista like they did in vista. its a WL110 Wireless LAN PC Card. i know it an old PC card but its more reliable then any of the other wireless LAN devices in my house. the WL110 Wireless LAN PC Card is a device that came out around 1995. the native xp...