|
|
samsung q1 sound driver and cd drivers by
AKASORA
has anyone found a way to install the drivers that came with the cd? when
try to install it it gives me a offline screen message. then i try to install
all of them individualy, but it fails to do so as it launches a chain
installer. the soundcard also does not work on vista i have contacted SRS
labs but they failed to contact me back. i installed the card once it worked
for about 10 min....
|
September 28th 06 01:02 AM
by AKASORA
|
0 |
180 |
|
|
Problem with Novatel Merlin U730, cingular connection manager, & V by
Dowtown Jon
Using build 5536, when I get done installing the cingular connection manager,
reboot and then put my Novatel card in my pc card slot, I get a blue screen
core dump.
If I try and reboot with the card in the notebook, I still get a core dump.
basically I cant use my WWAN card with Vista :-(
Notebook is HP NC8430, specs on request.... appreciate any help.
|
|
0 |
175 |
|
|
andLinux PreBeta and Vista by
LordDavon
Hello,
My name is David Solomon and I am the founder of andLinux. andLinux is a
native Linux distribution that runs seemlessly in Microsfot NT based systems,
which means no configuring, dual booting, partitioning, etc. andLinux has
around 10,000 active users.
I am readying the next version of andLinux and am testing it against Vista,
but the testing is failing. The problem is with one...
|
|
0 |
184 |
|
|
Vista Driver for Intel 82801FR SATA RAID on 925X Chipset by
ADAM
hi guys. I have a qustion where can i download an update for my 82801FR SATA
RAID controller to be version 6.0.11.x? I currently have version 4.5.0.6515.
"Arrow" wrote:
Hello Bill,
I asume you've tried the F6 once the installation begins? By the way I
needed to start my PC with the Vista DVD inside, to start from scratch, so I
was able to use F6. The initial start of the...
|
September 27th 06 11:18 PM
by ADAM
|
0 |
208 |
|
|
Any solution for mass storage controller issue? by
nibby
I can see from the posts that a few of us are having a problem with the mass
storage controller. So far I'm unable to use my USB external hard drive or my
memory card reader that is built into my laptop.
Does anybody have a work around or solution to this problem yet?
Cheers loads
--
Why can''t everything just work first time?!?
|
September 27th 06 09:19 PM
by nibby
|
0 |
254 |
|
|
U3 thumb drive doesn't work by
Micahman74
This is what I know but also as far as I've got...
1: You need to have launchpad intaller set to autostart
2: You have to remove password protection (at least while you are doing this)
3: Plug the drive in, launchpad will try to run, popup informing you that
launchpad is not compatible and option to check for update.
4: Choose yes, IE launches and you are informed that a software update to...
|
September 27th 06 08:53 PM
by Sean
|
1 |
867 |
|
|
Belkin F5D7001 Drivers? by
Arve
I also have the same card. At first i could not see my accesspoint, only 5 or
6 other network in my building. I tried the belkin driver but got the
'invalid inf file' error.
The current chanel of my accesspoint was set to 12 at the time. By changeing
the chanel to 2, the accesspoint suddenly appeared in Vista.
I could also connect to the internet after a while. But now the connection
is super...
|
September 27th 06 08:41 PM
by Arve
|
0 |
304 |
|
|
Problems with iPod shuffle by
ajh
Firstly, although the iPod installs OK Media player doesn't recognise it as a
media device so can't be used. I'm sure I could do this on an earlier build.
Secondly using iTunes (7 although from what I have read elsewhere, this
doesn't seem to be a version specific issue) I can't do much at all. iTunes
recognizes it OK but a restore or sync will fail (unknown error 1418) and
disconnect. Also...
|
September 27th 06 07:49 PM
by ajh
|
0 |
178 |
|
|
Problems using iPod Shuffle with Vista by
ajh
Firstly, although the iPod installs OK Media player doesn't recognise it as a
media device so can't be used. I'm sure I could do this on an earlier build.
Secondly using iTunes (7 although from what I have read elsewhere, this
doesn't seem to be a version specific issue) I can't do much at all. iTunes
recognizes it OK but a restore or sync will fail (unknown error 1418) and
disconnect. Also...
|
September 27th 06 07:48 PM
by ajh
|
0 |
187 |
|
|
Problems using iPod Shuffle with Vista by
ajh
Firstly, although the iPod installs OK Media player doesn't recognise it as a
media device so can't be used. I'm sure I could do this on an earlier build.
Secondly using iTunes (7 although from what I have read elsewhere, this
doesn't seem to be a version specific issue) I can't do much at all. iTunes
recognizes it OK but a restore or sync will fail (unknown error 1418) and
disconnect. Also...
|
September 27th 06 07:47 PM
by ajh
|
0 |
174 |
|
|
|
September 27th 06 07:44 PM
by SeNaToR
|
0 |
192 |
|
|
Dual Video Card by
Martin Racette
Hi,
I can not boot into Vista with both video card enable in the BIOS, everytime
that I want to boot into Vista or XP, I have to go to the BIOS to Enable or
Disable the second card, is there a way to boot Vista with both card enable,
even if VIsta is not using SLI
BTW my motherboard is an Asus A8N-SLI-Deluxe, using 2 Asus 6600GT
--
|
|
0 |
181 |
|
|
Radeon 9600 resolution problem by
Mailman
Hey all,
Just downloaded Windows Vista RC1 and so far so good... untill I ran into a
resolution issue!
My primary display will not display resolution over 1024x780 dispite prior
to installation of vista my monitor was running the 1280x1024 resolution
without difficulty. My monitor is a pretty generic 17incher but I've never
had an issue with it like this before. Any suggestions?
(I do some...
|
September 27th 06 02:24 PM
by tonylee
|
3 |
209 |
|
|
Vista RC1 will not detect RAID-1 array by
Bradford
Hi there,
I am running a dual-boot system with XP and Vista RC1 (5600) x64. My XP
system is running on a RAID-1 array consisting of two identical SATA 160GB
drives. I installed Vista on an IDE 30GB drive.
Install went great. I was even surprised that Vista found all of my
hardware and automatically installed the 64-bit drivers. The problem,
though, is Vista did not detect my RAID...
|
September 27th 06 02:04 PM
by JackM
|
2 |
182 |
|
|
Nvidia ti 4600 by
plwpble
I am using an Nvidia ti 4600 by evga. On vista build 5600. The problem is
that windows cant find the right driver for this card. The one from the
nvidia web site dosen't find the card. Have there been other occurences of
this problem and is there a fix.
|
September 27th 06 09:13 AM
by John
|
2 |
167 |
|
|
vista install by
nic
system vista rc1
amd 3200
2gig ram
1x 200 gig stata 2 hdd ( system )
1x 320 gig sata 2 hdd ( storage )
2x nvida 6600 gt sli config
rating 4.0
my q is when i went to install vista on the 200 sata hdd it would not let
me install while both hdd where conected , so disconnected the 320 hdd and
installed the os on the 200 hdd ,...
|
September 27th 06 07:11 AM
by nic
|
0 |
171 |
|
|
vista install by
nic
system vista rc1
amd 3200
2gig ram
1x 200 gig stata 2 hdd ( system )
1x 320 gig sata 2 hdd ( storage )
2x nvida 6600 gt sli config
rating 4.0
my q is when i went to install vista on the 200 sata hdd it would not let
me install while both hdd where conected , so disconnected the 320 hdd and
installed the os on the 200 hdd ,...
|
September 27th 06 07:10 AM
by nic
|
0 |
165 |
|
|
Game controller by
antp_31
may game controller is not in my device manager how do i get it back in there?
Thank you
|
|
1 |
180 |
|
|
Can't select new partition to install Vista by
Auutumn
I just used Acronis Disk Director 10 to create a new 40GB partition. I used
the OS Loader to Boot from CD and when Vista was installing, it asked me to
select a partition to use. I selected the newly created partition but
clicking on Next did nothing. There was a msg at the bottom of the screen
that said basically that the device driver for the partition (drive) might
not be...
|
September 27th 06 05:48 AM
by Auutumn
|
0 |
206 |
|
|
Installing Vista on a new partition by
Auutumn
I just used Acronis Disk Director 10 to create a new 40GB partition. I used
the OS Loader to Boot from CD and when Vista was installing, it asked me to
select a partition to use. I selected the newly created partition but
clicking on Next did nothing. There was a msg at the bottom of the screen
that basically said that the device driver for the partition (drive) might
not be...
|
September 27th 06 05:47 AM
by Auutumn
|
0 |
208 |