|
|
Conexant AC97 Laptop Workaround by
James M
OK...thought this may help someone. I have a Toshiba P105 with the Conexant
High Definition Audio. Upon installing Vista RC1 I got no sound. At first
the driver loaded but I got the Code 10 error stating the driver could not
start. After deinstalling the device I could not get the driver installed. I
searched all the blogs and news boards. I found a lot of people with the
same issue and...
|
|
3 |
165 |
|
|
flashing screen issue and low frequency on some res by
J3tstream
I'm have noticed that at 1360x1024 resolution the screen in windows vista rc1
x64 keeps flashing often but not always. I've an x1900xt and the latest vista
rc1 beta drivers from ati. I thoght it may be an sync problem between
vga-driver-monitor.
Also I can't select 75hz in this resolution and I know the problem is not
the monitor or either the vga because I've also win xp sp2 and I can run...
|
|
0 |
157 |
|
|
flashing screen issue and low frequency on some res by
J3tstream
I'm have noticed that at 1360x1024 resolution the screen in windows vista rc1
x64 keeps flashing often but not always. I've an x1900xt and the latest vista
rc1 beta drivers from ati. I thoght it may be an sync problem between
vga-driver-monitor.
Also I can't select 75hz in this resolution and I know the problem is not
the monitor or either the vga because I've also win xp sp2 and I can run...
|
|
0 |
162 |
|
|
Format for ReadyBoost by
Sam Steinhauser
I purchased a Sandisk 2 Gb drive and after it came up and set up ReadyBoost I
had a strange extra drive CD Drive (H:) U3 System. I also had my flash drive
with 1.91 Gb. I decided this was some lame program Sandisk had shipped with
the drive and attempted to format it. Vista would not allow me to format
because the drive was in use. I went to XP and the only format option was FAT
or FAT32. I...
|
|
0 |
159 |
|
|
GeForce 7600 GS on Vista 5600 (x64) by
michta
I can't seem to get the Vista x64 drivers from NVIDIA working for my
Gigabyte GeForce 7600 GS PCIe video card. Initially Vista installs the WDDM
driver, but then disables the device (code 43). After I install the NVIDIA
96.33 drivers for x64, I restart my computer and Windows again disables it.
I have a Gigabyte motherboard with the Intel 82945G chipset and the onboard
video works, but I'd...
|
September 22nd 06 07:21 PM
by michta
|
2 |
155 |
|
|
|
|
0 |
162 |
|
|
IPAQ 6910, Vista RC1, Office 2007 by
Tony Thijs
Hi,
Does anyone has experience with the newest IPAQ 6910, Vista RC1 and Ofice
2007 tech refresh. I want to test the combination.
Kind regards,
Tony Thijs
|
|
0 |
165 |
|
|
via Arena by
Max
Hi,
I've a graphic chip K8N800. Is compatible with Aero Glass. Now Aero is
disabled, may be of the driver
Thank you
Max
|
September 22nd 06 05:50 PM
by Max
|
0 |
155 |
|
|
USB Mass storage devices fail to install by
Gary G. Little
This happened first on an upgrade from XP SP2 to RC1, and now on a clean
install. None of my USB mass storage devices would appear in Disk
Management or Computer. Looking at error messages I was seeing a driver
failed to install with a bad parameter. I did a clean install and all of
them appear. However, while working with a 120 GB Seagate FDE, I ran that
unlock utility which changes the...
|
September 22nd 06 05:50 PM
by sbok
|
4 |
229 |
|
|
No USB by
like2hike
After I installed Vista Beta my USB connectivity was gone. I upgraded to the
Vista RC1 version hoping that would fix the problem. Nope. There is nothing
in the Device Manager about USB. The drivers, however, are on the computer.
What can I do to make my computer recognize the USB ports?
|
September 22nd 06 05:48 PM
by sbok
|
1 |
489 |
|
|
Pyxis 210 USB Network by
GooD
my adapter dsl broadband Pyxis 210 USB Network does not work under Vista
Windows that I can do, I do not have connection to Internet
|
September 22nd 06 04:25 PM
by GooD
|
0 |
282 |
|
|
Audigy 4 + rc1 by
AJASAUR
Hiya i've got an audigy 4 sound card and i've just installed rc1, and of
course i cant get no sound :-( I've tried the beta drivers from creative and
the xp 64 divers as well and nothing seems to work.
Has anyone managed to get an sudigy 4 to work with rc1? And how?
|
September 22nd 06 12:35 PM
by johnlm
|
2 |
148 |
|
|
RC1: No bluetooth item in Control Panel. by
BWN
As with the Beta 2, I can't get bluetooth to setup devices. The hardware is
detected and installed, but I am supposed to add bt-connected devices through
the control panel, however no bluetooth configuration settings present. Has
anyone had any luck?
Dual-boot XP-SP2 & Vista-RC1 on an Acer TravelMate 8204WLMi.
|
September 22nd 06 06:25 AM
by BWN
|
0 |
160 |
|
|
Aero needs 16bit to work. using Nvidia 6200 by
Roy DB
Just got my card for a song. Installed but no Aero on either Nvidia's driver
or the MS WDDM (4.3 for Graphics). I did all the steps, activated windows,
looked at Windows Color and Apperance but Aero was not listed. Played around
and rebooted every time.
What I was missing was my color depth was at 16bit, cranked it to 32bit and
all aero glass is working. Looks quite nice. Works on both...
|
September 22nd 06 06:21 AM
by Roy DB
|
0 |
142 |
|
|
Game controller by
antp_31
Trying to install my game pad in the usb port and does not find it. Went into
game controller and tryed to install it manaully and the error comes up game
cotroller not in device manger. looked inside and can not figure out how to
load it in there. any ideas?
Thank you
|
September 22nd 06 02:21 AM
by antp_31
|
0 |
156 |
|
|
Vista (x86) and projectors by
Carol Steele
I need to use a projector as well as my monitor to display slideshows. I'm
using an nVidia 7600GT graphics card. With my old system (with a Matrox Dual
Head G550 card) all I had to do was turn on the dual head mode and use it as
a clone of the main monitor. No problem, when I turned off the projector the
system was fine displaying on just the main monitor and when shut down and
powered on...
|
|
0 |
154 |
|
|
Microphone not working by
Marcelo
I have a ASUS P4S800 Motherboard. I downloaded and installed the latest
drivers. The microphone icon apears in the Control Panel / Sound / Recording.
I can configure this device in Microphone Setup Wizard as a Desktop
Microphone and see the slide bar moving when I speak, but I hear no sound
from speakers. Where my mystake? Can someone help me? Thanks a lot for any
aid.
|
September 22nd 06 12:24 AM
by Marcelo
|
0 |
146 |
|
|
no drivers for cd rom or dvd rw by
sscobalt06
I am also having the same problem, I have 2 LITE-ON DVD-RW and CD-RW/DVD
and they were working fine and I came upstairs to burn a CD and poof
magic.... they were gone.
AMD Athlon 64 3700+
NVIDIA GeForce 6600
2G DDR 2
"chrsbrq" wrote:
|
|
0 |
160 |
|
|
LITE-ON DVDRW SHM-165H6S and LITE-ON Combo SOHC-5036V drivers..... by
sscobalt06
Everything was working fine earlier today when I cam upstairs and was going
to burn a CD when I went into My Computer and both my CD-RW and DVD-R drives
were not there. I went into the device manager and it shows both drives but
they say that their drivers failed to load. Need help, tried searching for
new drivers but Windows says that it has good drivers.
|
|
0 |
168 |
|
|
Both my CD-ROMs stopped working, many "Event 11, cdrom" errors in by
kbmyers
I'm running Vista RC1 build 5600. Had the system running fairly well. Tried
to install some CD-ROM software, after that both of my DVD writers wouldn't
work. Systems sees them, but can't access any disks. If I boot the system
with a disk in the drive I get a BSOD.
Had a similar problem once on XP so I followed the advise below to remove
both the "upperfilters" and "lowerfilters" registry...
|
September 21st 06 11:29 PM
by Carlos
|
2 |
191 |