|
|
Power management not working in RC1? by
Kan
I am running 32bit RC1 build 5600. I previously had the July CTP installed
(don't remember the build number). With the July CTP, power management
worked. The hard disk spun down, display shut off, computer went to sleep,
etc, etc, on schedule.
After a clean install of RC1 however (installed to a new Windows folder),
power management does not seem to work anymore. I have tried different...
|
September 14th 06 04:48 PM
by Kan
|
0 |
185 |
|
|
Canon MF5730 by
David Loewen
I have the 64-bit Windows Vista RC1 and was wondering if anyone knows of a
way to get a Canon MF5730 running under that version. Canon doesn't have any
64-bit drivers, and all I want is to get the printer portion working at the
moment. Any suggestions as to a generic driver I may be able to use?
Thanks in advance.
|
|
0 |
175 |
|
|
Vista RC1 64bit and XF-i Fatal1ty by
Baldy
I have downloaded SBXF_PCDVTBETA_L3_2_10_0000.exe and tryed to install it
several times without any luck, I am going insane....I assume there would be
more people complaining about this hardware if the drivers didn't work at
all? What am I doing wrong!??
|
September 14th 06 01:37 PM
by Baldy
|
4 |
161 |
|
|
Display Properties problem in RC1 by
Ken
Since installing RC1, when I unckeck "Hide Modes that this monitor cannot
display" in the advanced section of display properties, I am initially able
to get the 1776 X 1000 (1080i) I need, but after using Media Center or
rebooting, the resolution resets to a "safe" resolution. When I go into
display properties again, the Hide Modes box is again checked. This did not
happen in Beta 2 or 5534,...
|
September 14th 06 01:35 PM
by Ken
|
0 |
158 |
|
|
MISSING Battery Driver by
Marc Nutty
Hi,
On my notebook with Vista RC1 installed, Vista doesn't pick up my battery
and is listed as an "unknown device" in device manager. I think I am looking
for some missing drivers for "Microsoft SMART Battery Subsystem".
Thanks for any help.
Nutty
|
|
0 |
165 |
|
|
about OID_IP6_OFFLOAD_STATS and OID_IP4_OFFLOAD_STATS by
Yu Hao
Hi ,
I'm developing network card driver on Vista ,my card does not support
taskoffload ,
but I'm always receive the query oid OID_IP6_OFFLOAD_STATS(0xfc01020a) and
OID_IP4_OFFLOAD_STATS(0xfc010209),
I've tred to return NDIS_STATUS_INVALID_PARAMETER or
NDIS_STATUS_NOT_SUPPORTED ,but the query was go on...
What can I do ?
--
|
September 14th 06 08:18 AM
by Yu Hao
|
0 |
247 |
|
|
Turn off tapping on Dell D820 touch pad? by
Just Bob
Does anyone know how I can turn off tapping on the touchpad and mouse
"stick" on a Dell D820?
My experience: I installed the Alps input device driver for XP from the Dell
website but Vista warned me the driver is known to have problems. It's
working for just the tapping shutdown but I'm concerned about stability.
Should I be surprised that by now we still do not have this kind of controls...
|
|
0 |
214 |
|
|
Graphical Garbage on a Radeon x700 Pro by
Truth Unknown
After I install the ATI RC1 driver I get problems. At post-boot startup,
shutdown, login, logoff, user select, and UAC (User Account Control) screens
I have garbage filling the whole screen. In fact its exactly the same garbage
every time. The MS drivers do work but there is no Control Panel.
My PC's hardware is:
Intel Celeron Northwood CPU 2.0GHz 400FSB
Shuttle AV49VN ATX Motherboard...
|
|
4 |
382 |
|
|
Samsung CLP-500 by
jwardl
Anyone know if Samsung intends to release a Vista driver for this printer? I
know it's discontinued, but only as of 12-18 mos ago.
|
September 14th 06 05:10 AM
by jwardl
|
6 |
218 |
|
|
USB - "Your device can perform faster..." by
Gary
No matter which port I use, when I plug in my Maxtor external USB drive,
Vista advises me that that it's not plugged into a USB 2 port. When it shows
available "hi-speed" ports, they're all there, but no matter which one I
use, it still sees it as USB 1.1.
Any ideas?
|
September 14th 06 04:02 AM
by Gary
|
2 |
149 |
|
|
VISTA EYE CANDY and No Support for INTEL MotherBoards by
Jon Acord
VISTA RC1 32 Bit / 64 Bit both provide no support for my PCI Video slots on my
IntelĀ® Server Board SE7525RP2. I did a clean install on my 64 bit PC (both
32 bit and 64) using my NVIDIA PNY 7600
GT PCI Express card 2 Gigabytes of DD2 RAM.
Keep in mind folks that this setup works fine with XP Professional 32 bit
and 64 bit, which I am forced to run as we
speak due to VISTA's inability to...
|
|
2 |
118 |
|
|
|
|
0 |
154 |
|
|
Conexant Sound with RC1 by
James M
I have a Toshiba P105 and it was loaded with the Conexant Sound. After the
installation of RC1 my sound stopped working. Currently it appears the
Microsoft drivers are loaded. It recognizes the device as High Definition
Audio. I try to load the Conexant XP drivers an it fails.
In device properties this is the following error:
This device cannot start. (Code 10)
I have searched the web...
|
September 14th 06 01:56 AM
by James M
|
0 |
118 |
|
|
Conexant Sound with RC1 by
James M
I have a Toshiba P105 and it was loaded with the Conexant Sound. After the
installation of RC1 my sound stopped working. Currently it appears the
Microsoft drivers are loaded. It recognizes the device as High Definition
Audio. I try to load the Conexant XP drivers an it fails.
In device properties this is the following error:
This device cannot start. (Code 10)
I have searched the web...
|
September 14th 06 01:55 AM
by James M
|
0 |
117 |
|
|
Intel Graphics Driver Widescreen... by
jon lloyd
I can't seem to get the right resolution on Widescreen. I have a Gateway
7330GZ laptop and the Intel 82852/82855 Graphics Controller, but I can't
adjust the resolution for widescreen. Thus, all my web pages are looking a
bit stretched, and my desktop icons are huge. Just seems like everything is
stretched enough to barely notice.
Searched for a Vista driver from Intel, but no dice.
Thanks...
|
|
0 |
124 |
|
|
Generic Voulume Driver ?? by
Lincoln 6 Echo
Hi guys,
I got vista installed on my LG LS-70 Express notebook, and I must admin,
RC-1 RULEZ!
Pretty much everything was detected except: MSI Bluetooth Device, my High
Definition Audio Driver, and Mass Storage Device.
First two were easy to fix with directing Vista to my XP Pro installation
directory, where it found the needed info.
|
|
0 |
130 |
|
|
Modem Not Working or Seen by Vista by
Jason Saffer
Hi all,
I've installed Vista on my system with a dual boot option (XP and Vista).
When in XP, I can access the Net with my computer's modem, no problem. But
when I boot into Vista, Vista doesn't seem to know that there's a modem
present. I can't dial out at all while in Vista, I get a message that no
modem is detected. Any ideas on how to fix this -- hopefully, without having
to replace my...
|
|
2 |
157 |
|
|
ATI x700 pro 256 by
Michael
ATI has a Vista Readiness applet that tells what you can run or not in
Vista. Also, don't install CCC.
Michael
"Dave" wrote in message
...
Installed drivers, uninstalled drivers, more than once, changed video card
to 9600 pro, still can't get vista to work right with the rc1 beta
drivers, the 80meg or 150...
|
September 14th 06 01:07 AM
by Dave
|
3 |
143 |
|
|
HP Photosmart 7550 by
SteepleChaser
HP Photosmart 7550 Printer support for Windows Vista? Printer fails to
complete the install process.
Printer installed on dual boot system, working fine on xp side. any ideas
would be appreciated
Thank You
|
September 14th 06 01:06 AM
by Peter M
|
3 |
129 |
|
|
RC1 missing SATA Controller by
Joshua
Beta 2 didn't miss it, Win XP surely doesn't miss it, so why the heck is RC1
missing it??? RC1 fails to install the Intel 82801FR SATA AHCI Controller
which came with my Dell 8400 PC. Instead I get the Standard AHCI 1.0 Serial
ATA Controller...and this one keeps loosing my hard drives. At random, my
400GB drive will just vanish. When I try to install the Intel drivers, RC1
doesn't like it;...
|
September 14th 06 12:15 AM
by Joshua
|
0 |
161 |