I did a clean install of RC 1 today and everything went well. Everything works except that I cannot find the DVD ROM Drive. I put different DVD's into the Drive and nothing is detected. I've been to Device Manager and tried everything and still no detection. I have a Gateway 610 XL Media Center PC with 200 GB of Ultra ATA HD, 2 GB of DDR SDRAM , Pentium 4, 3.0 GHz Processor 800 Mhz...

Clean install of Vista 64 Bit RC-1, and experience problems at the very end of the install. All files are loaded and no issues reported until the end. The screen just turns blank. Reboot machine, and it says Windows did not load correctly and do you want to start in Safe Mode The screen displays the error: Out of Range 36.3Khz /34Hz

I've got an audigy 4 card and for the life of me i can't get it to work with rc1. I've tried the beta drivers from creative and the xp 64 pro drivers with no luck. Has anyone out there got there audigy to work and how did you do it?

Alright, I have a Dell 600m Laptop. It has a ATI Radeon 9000 64MB video card. Currently if I go above 1024 x 768 Resolution the whole desktop is no longer in view and Vista then does some werid scrolling. Now I pretty sure this is not vistas' fault. It must be something to do with configuration. Something else that is werid is that 4 Monitors show up in device monitor. Since this is a...

Alright, I have a Dell 600m Laptop. It has a ATI Radeon 9000 64MB video card. Currently if I go above 1024 x 768 Resolution the whole desktop is no longer in view and Vista then does some werid scrolling. Now I pretty sure this is not vistas' fault. It must be something to do with configuration. Something else that is werid is that 4 Monitors show up in device monitor. Since this is a...

Okay, I know the guys in the States have nothing to do with Pacard Bell BUT..... I have a PB Easynote W7621 laptp. PB do not have any drivers for Vista at all, as far as I can see on their web site. Although Vista downloaded the updated drivers for my GeForce 6600 (256MB) and now my system runs fine in all resolutions..... How do I get it to run Aero?

I have Beta 2 installed currently. I was experiencing problems with my mouse clicking 2 times when I clicked it once, or at least effecting the objects it was clicking. I decided to reisntall before placing RC1 on, thinking I had screwed this up myself. I completed a clean install, and went in to complete windows updating. It notified me I had one update to isntall, so I installed and...

I believe i made a fatal mistake when I upgraded my memory recently. I went from 2 GB of PC3200 to 4 GB of PC4000. After the upgrade Vista had seriuos issues and would not boot at all. I removed Vista and tried a clean install but it seems the it does not care for my new memory, I keep getting error messages when I boot about critical failures and non Paged memory. I had hoped the Blue...

Hi, I am having trouble to get my drivers for my SATA to upgrade my current BETA 2 installation on my M400 Tablet. I am looking for the storage drivers for my SATA. Which seems to be a ICH7 Intel but I cannot find them anywere was anyone able to by pass this? Thanks, G.

http://blogs.msdn.com/tomarcher/archive/2006/06/02/615199.aspx Is there a list of ready Boost Drive? or exact specs for these drives? thanks

I still have this error "Windows has stopped this device because it has reported problems. (Code 43)", after a couple of months with Vista Beta 2 5384, i never get to work aero, i was using XP drivers. But i just downloaded the RC1 beta drivers from ATI and nothing, its really fustrating. None of Vista drivers worked for me, Windows Vista default, ATI beta 2 and now ATI RC1. I think is my...

to share my experience with you,itry to install share printer on laptop call beebee to my computer called starduss (vista rc1 )i have to stay in front of starduss for a 6min for enjoy my new shared printer ,by opposition i installed this same network printer on another computer(premis) network xp in 2min timed.I thing microsoft have to work on speed of vista configuration who is very slow...

Does anyone have drivers for the Belkin Pre-N Wireless Desktop Adapter under Vista (RC1), or know how to get this card working? -- Chris

I have an HP scanjet 4600 and am having problems making it work in RC1. It worked fine in Beta2 though. There doesnt seem to be any HP software that works in RC1 even though the win xp software worked in Beta2. The OS originally used the driver for win xp which worked fine before. Now it gives an error when I try to use it even in the windows fax/scan ui. It can do a preview scan but if I...

am experiencing the same problem using the ATI X1900XTX. I get all the way thru the installation of Vista RC-1, and then the screen turns black. I then reboot the system and perform the repair from the installation Disk, and it is unable to resolve the error. My screen displays the error: Out of Range - 36.3Khz / 34Hz At this point I am unable to continue. However, the machine works...

Running Vista RC1 32-bit System is a dell latitude d410 w. intel 915gm display chipset. Problem is that the screen can only be set at a maximum of 1024x768 under resolution for the PnP monitor and that it can not be increased to the native resolution of 1280x1024 when using the pnp monitor, there is another monitor listed, the default monitor and when selected it will allow me to change the...

I am experiencing the same problem using the ATI X1900XTX. I get all the way thru the installation of Vista RC-1, and then the screen turns black. I then reboot the system and perform the repair from the installation Disk, and it is unable to resolve the error. My screen displays the error: Out of Range - 36.3Khz / 34Hz At this point I am unable to continue. However, the machine works...

All drivers except for a "Base System Device" load up. This started happening with pre-RC1 and continued with RC1. Previous versions installed everything. Any thoughts? Thanks in Advance.

Hi...downloaded and built dvd as instructed...ran the dvd...setup starts..then informs me that my system is not a 64 bit system...I have a new Compaq Presario with an AMD Athalon 64 Bit 3500+. I am trying to test Vista using Microsoft Virual PC in using a clean install....Any help would be appreciated. Thanx in advance AnthonV60

CAUTION -- If you have an OEM version of the ATI X800 XT video card (ei: from Dell) I would strongly suggest that you DO NOT use the ATI drivers or the Windows update secondary drivers....when I did, BSD occurs on start up.