|
|
AverTV Card 301P by
Lan Vinh Ly
I can't used AverTV Card 301P in Windows Vista RC1 5600 Uti
I can help for Microsoft !
Thank you very much !
|
|
0 |
487 |
|
|
AverTVCard 301P by
Lan Vinh Ly
I can't used AverTVCard 301P in Windows Vista RC1 5600
I can help for Microsoft !
Thank you very much !
(email : )
|
|
0 |
524 |
|
|
Device Manager by
rosca
Have a strange problem, when trying to open device manager to do some
hardware maintainance, Windows Explorer reboots and the device manager never
opens. Any ideas?
|
September 7th 06 09:49 PM
by rosca
|
0 |
490 |
|
|
Vista Pre-RC1 build 5536 and Acer Aspire 1620 by
Michele Di Maria
Hello,
anyone is able to let Vista pre-RC1 work with the ATI Mobility Radeon
9700 (64Mb) of the Aspire 1620?
The driver information says: "Windows has stopped this device because it has
reported problems. (Code 43)" really can't make it work... any ideas?
Thanks,
Michele
|
|
4 |
512 |
|
|
4 LCD's and 2 Video cards by
Armando Arroyo
I have a 7900GT with Dual monitors (Viewsonics both VX2025wm and VX924
secondary). When expanding the desktop to the secondary monitor the
Widescreen VX2025wm goes out of range and there is no way to bring it
back, other than starting in Safe Mode or disconnecting the 924 from the
Videocard. Tried the Nvidia drivers and It wont work either.
If anyone knows about a fix for this would be...
|
|
0 |
481 |
|
|
Extended Desktop Intel 855 chipset. Motion M1300 by
Lord of the PAnts.
I've got Vista running on my Motion M1300. I normally run my tablet in
portrait mode and an extended desktop onto a Samsung 193p in portrait mode.
I have not been able to find a way to control the orientation of the
secondary Samsung. I can get an extended desktop onto it in landscape mode
only. all of the normal aspect modes like 1024x768 are available in display
settings for the...
|
|
0 |
481 |
|
|
No "Bluetooth Devices" in Control Panel by
Sam
I am experiencing the same problem, even in RC1. I have a IoGear GBU311
Bluetooth receiver; I plug it in (though the drivers didn't install
automatically - I pointed it to the XP driver set and it installed with no
aparrent issues). However I do not have the Bluetooth Control Panel. It is
recognized as a Broadcom Bluetooth device in device manager.
"Iwona" wrote:
Hi,
|
September 7th 06 04:38 PM
by Sam
|
0 |
523 |
|
|
Audigy 2 ZS Platinum. Vista RC1 5600 and digitally signed drivers by
Leadfoot
I did the "bcdedit / set nointegritychecks ON" from the command prompt as
the Administrator. Got verification tthat it was set. re-booted and when I
installed the latest Creative 64-BIt driver about 15 files (give or take a
couple) came up with messages that "this version of windows will only
install digitally signed drivers"
When I do a standard reboot the loudspeaker icon is red X'ed,...
|
|
0 |
485 |
|
|
Driver installation during setup by
Or Tsemah
Hi all.
I have a desktop computer that allways have two drivers not correctly
installed in setup while present in the DriverStore
1. Realtek HD Audio (IS being installed as just "High Definition audio and
do not work)
2. ICH7 LPC Interface Contoller - 27B8 (Not installed at all)
|
|
0 |
488 |
|
|
MSI Vox USB TV Tuner by
Dinana
My MSI Vox USB Tv Tuner is not working under Vista Pre-RC1, Vista only
recognizes the video in part of it. Back in XP it is recognized as 4 devices
under Sound & Multimedia (Tuner, Video, Sound & Infra-red remote receiver).
That was using the drivers from MSI. Any idea if it's a limitation with vista
to only have one driver for each USB connection or if drivers for the vox
will be included...
|
September 7th 06 05:38 AM
by Dinana
|
0 |
478 |
|
|
|
|
0 |
446 |
|
|
HP Compaq NX7000 display goes crazy after install by
Rich
I installed Vista RC1 on a HP Compaq NX7000 laptop with a 1.8GHz Intel
Centrino Processor, 512MB of RAM, and 64MB Radeon 9200 video. The chipset is
Intel 852/855. When it got to the part during setup where it asks to create
an icon, user name, and password the screen suddenly went crazy like it was
out of sync. I did manage to get through the rest of setup even though the
display had...
|
September 7th 06 01:40 AM
by Rich
|
0 |
558 |
|
|
Cannot extend desktop with multiple monitors by
worldzfree
I just did a clean install of RC1 (5600) on my Dell GX280. It is running an
Intel 82915G/GV/910GL Express Chipset Family on-board video card and also
running the DVI adapter that allows me to run another monitor.
The OS installs fine but when I have mirrored desktops running by default.
When I go into the display settings it shows my second monitor as
greyed/disabled. If I right-click on...
|
|
0 |
1,035 |
|
|
No external sound since upgrade from Vista Beta 2 (to pre-rc1 - rc by
PierreDa
Hi there,
I use Vista RC1 and installed it without problem. Working fine right now.
I have just a problem with external sound since I upgrade from Vista Beta2
to Pre-RC1 and now from Pre-RC1 to RC1.
As my internal sound and speakers works well, I can't have sound on my jack
where I can connect external speakers or headphones ... NO WAY !!
|
|
0 |
467 |
|
|
Pentium M not stepping down - Heat issues by
Dustyd63
I installed Windows Vista last night and am experiencing trouble with getting
the CPU to step down on my 1.7GHz Dell Inspiron 8600. I was wondering why
the fans were running constantly when the task manager didn't have any tasks
actively using the CPU. Upon installing I8kfangui, I noticed that the CPU
wasn't stepping down to 600 MHz like it did in XP. I checked the BIOS
version, and it is...
|
|
0 |
503 |
|
|
Pentium M not stepping down - Heat issues by
Dustyd63
When I installed Vista RC1, I noticed that my Dell Inspiron 8600 ran hot -
the fans are always starting and stopping. Looking at the task manager, I
found the CPU usage negligable, so I looked elsewhere. When I installed
i8kfangui, I noticed that Vista never steps down the CPU to 600 MHZ, so it's
always running at the full 1.7GHz. Has anyone found a fix for this? I'd
like to use Vista...
|
|
0 |
445 |
|
|
Disable refresh rate by
_WHAT_
Normally on XP I would disable refresh lock in the nvidia driver panel for
the gfx card. But in vista there is no such panel. How to disable refresh
lock.
Reason beeing, I am on a lcd monitor when playing a game I only get 60fps
because of the rate lock. With it disablet I can go a lot higher.
Thx in advance.
GFX: 7800GTX
|
September 6th 06 07:03 PM
by _WHAT_
|
1 |
567 |
|
|
DISABLE refresh rate by
_WHAT_
Normally on XP I would disable refresh lock in the nvidia driver panel for
the gfx card. But in vista there is no such panel. How to disable refresh
lock.
Reason beeing, I am on a lcd monitor when playing a game I only get 60fps
because of the rate lock. With it disablet I can go a lot higher.
Thx in advance.
GFX: 7800GTX
|
September 6th 06 06:48 PM
by _WHAT_
|
0 |
477 |
|
|
"Turn Off Display" Not Working with All ATI Gfx by
iwod
In XP, when you set Turn off Display ( I think it was called turn off monitor
in XP ) after x min. The Monitor will actually turn itself off.
In Vista, the monitor ( in all cases , they are LCD ) will have a blank
display but the backlight will stay on. This is really annoying as i keep on
computer on at night.
Here is a post on Neowin where a lot of other member have similar...
|
September 6th 06 06:00 PM
by iwod
|
0 |
474 |
|
|
Windows Vista over an USB drive by
Igor
Hi Guys,
I'd like to install windows vista over an USB attached drive.
It wasn't possible with WindowsXP; Is it possible with Vista ?
I have a Company notebook I can't overwrite with Vista (for Company
policies).
Thanks
Igor.
|
September 6th 06 05:00 PM
by Igor
|
0 |
492 |