|
|
touchpad works intermittently by
Stacey
Hi,
I just got my laptop about a week and a half ago and I love the scrolling
function using the side of the touchpad, but I find it works intermittently.
Sometimes it works and sometimes it doesn't. I find whenever I go to the
help function in windows vista and start searching for a a help topic about
it, it starts to work again - usually it stops working while I'm on the
internet...
|
April 23rd 08 02:27 PM
by Stacey
|
0 |
89 |
|
|
What next? No wireless found: No problems either by
Curt in Budapest
Dell Ispiron 1420 - almost brand new. Vista Home. A collegue from another
office brings it to me.
It cannot see my wireless network! (It can't see it in her office either)
(I verify that it is on, check all the settings - It can't see a thing.)
Cable network connection works perfectly.
I bring it to my computer dealer - same thing. He thinks setting are fine.
I do Dell connect over the internet...
|
|
1 |
89 |
|
|
windows update results in network failure by
Fred Casa[_2_]
After installing important/recommended Windwos updates on my Dell Inspiron
XPS, Windows can't find the broadband connection via my router (another PC is
still connected to the internet via the same router). After System Restore,
the network connection is re-established. What is happening? Any advice? The
choice seems to be between updates and internet connection.
|
January 12th 08 06:24 PM
by Dwarf
|
2 |
89 |
|
|
My JVC GR-DVF 21U Mini-Digital camcordor. Vista won't recognize by
ilhsm
I have used the correct cable and went to JVC site which is useless. I tried
everything. Windows movie maker,DTI which came with my Acer laptop. no
matter what I do My computer will not recognize my video camera for me to
transfer video movies. Can anyone please help.IEEE 1394 Firewire Cable is the
cable i used.
thank you
|
December 27th 07 04:37 PM
by ilhsm
|
0 |
89 |
|
|
mouse and keyboard not working by
xavi_an
I have windows vist 64x ultimate. I installed uniblue registry booster and
did some cleanup using it. After restart my keey board and mouse stopped
working. I am able to use the key board in bios setup and the mouse works
fine while booting from vista DVD, but both not working inside vista. I tried
restoring by booting thru Vista DVD, it says "No restore point saved" but i
never deleted any...
|
|
2 |
89 |
|
|
Epson Scanner for Vista by
animalover52
I have an Epson Perfection 4490 photo scanner that I have downloaded driver
updates for Vista from the Eson site, but the scanner won't work,
still...Vista can't find or open the file...in Device Manager says " The
drivers for this device are not installed. (Code 28)" Any help would be
appreciated.
|
|
1 |
89 |
|
|
Sleep mode and DVD player not being recongized after wake up by
Rick
I have noticed that when my computer goes into sleep mode, when I wake it up,
the DVD player that had previously been recognized is no longer. I have an
new Panasonic DVD burner that is always recognized, but the problem is with
the second OEM version DVD player. It is recogized on POST and when the
computer is booted up, but once the computer goes into sleep mode, it is then
erased from...
|
November 25th 07 02:21 PM
by Rick
|
0 |
89 |
|
|
Default setting when connecting camera by
Tim Mills
Hi
When uploading pictures from my camera a Removable Disc dialogue box usd to
appear with 5 / 6 options for the pictures. I think I ticked the "Always do
this action" box by mistake but I don't know how to return to the original
setting that shows all the options - is this poss?
TIA
Tim
|
|
0 |
88 |
|
|
Dual LCD Display Issues by
fvlmasl2[_2_]
Hello,
I have Vista Ultimate 32 and when both LCD's are hooked up they both revert
to default settings after I make any changes to the brightness,
contrast...and so on. One is a Samsung SyncMaster 906BW (Digital) and the
other is a older ViewSonic VG150B (Analog). Once I unplug the Viewsonic
from my system all is well with the settings. I have tried all the current
drivers and updates...
|
|
0 |
88 |
|
|
All the Right Buttons, No manual? by
mark
Micorosoft Wireless Bluetooth Laser mouse 8000
I was having problems rechraging etc?
Pressing buttons and resets for months trying to figure out how to low level
reset this device. Here's how.
Leave the USB bluetooth device plugged in at all times.
1. press and hold mouse reset x 15 sec, then 5 sec, then 5 sec again
2. mouse is blinking green-red (pause) green-red...
3. take mouse off charge pad...
|
October 20th 07 04:29 AM
by mark
|
0 |
88 |
|
|
Two problems - Cant seem to get a foothold. by
BrantRaven
Hi Everyone,
I am having a couple of issues with a Vista Ultimate install which I can't
seem to solve or even get a good direction on. Really hoping someone can help.
Problem 1:
Every couple of days I get a BSOD, which always seems to occur after Event
ID: 111 and with a source of nvlddmkm. From some research I think it is
related to my NVidia based graphics card, but I can't be sure. I...
|
|
0 |
88 |
|
|
Vista reports 1gb when I have 2gb installed by
Carlos
Joe:
Donwload and install the freeware reporting utility CPU-Z
(http://www.cpuid.com/cpuz.php).
See what does it say about your memory in the SPD tab.
Carlos
"Joe K" wrote:
I installed 2GB into my computer but only 1GB shows in Vista (32-bit). The
BIOS shows 2GB. What do I need to do.
|
March 27th 07 11:12 PM
by Joe K
|
1 |
88 |
|
|
USB to serial adapters by
delawhere
I have a new toshiba laptop running vista home premium and I'm trying to find
a USB to serial adapter thats compatible. I bought one from radio shaft, but
vista won't recognise the device. Thanks in advance for any help.
|
|
0 |
88 |
|
|
Internet not connecting by
ra-ra
I purchased a compaq presario PC with Vista Home edition installed on it last
week.
I had to install a usb wireless internet connector. It connected to the net
for the first week but now refuses to do so. it has the icon in the bottom
right corner with the two computers with a cross, but when you click it and
hover above the internet connection it says it is connected, but when you
click on...
|
|
3 |
88 |
|
|
recording what is played in media players by
calvino_iND
Hi,
i'm using Windows Vista and i can't achieve something that was done easily
under Windows XP.
Under XP, in the audio "record" settings panel, i was able to tick an input
stream for the record, in a list of input streams. Amongst these input
streams i had a checkbox "what is played".
When this checkbox is ticked, in the SoundRec.exe (magnetophone)
|
|
6 |
88 |
|
|
Default Sound Playback Device Changes itself by
Geo
This in Vista Ultimate x64. I have three playback devices listed: Speakers
(Createive SB X-Fi), SPDIF Out (Creative SB X-Fi), and Speakers (USB Audio
Device --actually a Logitech EasyCall mike/speaker for VoIP calls). The
problem is, I keep setting the default to Speakers (Creative SB X-Fi). . .and
yet a few hours or days later when I try to play a youtube video or something
I get no sound...
|
September 7th 07 02:58 PM
by Geo
|
0 |
88 |
|
|
|
September 11th 07 12:18 AM
by Delboy
|
4 |
88 |
|
|
Broadcom WLAN by
JB Reyes
Im using HP Pavilion zv6130us. i've just install Vista Ultimate all hardware
i think just works well but not the WLAN broadcom., in the device manager the
status is working fine but if i press the WLAN button to activate, my PC just
starting to hung a bit not responding until a press again the WLAN button to
deactivate it and my PC works back again.,
I dont know if the WLAN is working or...
|
|
0 |
88 |
|
|
Unable to read burned DVDs with Vista by
Tyler
I currently have a lite-on brand dvd burner LH-20A1L. I can burn disks fine
and read plain dvds and cds fine but when I try to read a burned dvd, it will
ot allow me to open the contents of the disk. When I click on open, the next
window that appears is "Prepare blank disk." I have taken the same disks and
they read fine on other computers. All windows updates and drivers are
current,...
|
|
3 |
88 |
|
|
Installing drivers problem (those who are integrated in windows vi by
Niko
I have a problem. I installed Vista Business (from MSDNA-A) and all the
devices installed correctly. But now every time I connect a device the found
new hardware pops up and tells me no driver can be found (like for an USB
mini drive for example). If I search in c:\windows\system32 it installs the
driver. It's really annoying, because I have reinstalled vista 2 times (fresh
install) but the...
|
|
3 |
88 |