Hi, I am using a Microsoft Wireless Notebook Optical Mouse on my Dell Inspiron 1525 with Vista Home Premium with Service Pack 1. When I click on the mouse program, I get the following message: Some mouse settings might not work until you connect a Microsoft mouse to a USB port on your computer or set up a Microsoft mouse that uses Bluetooth technology.

Any idea why this cable is not recognized by Vista (actually it sees it and starts trying to load the drivers, then says no compatible drivers found). Everything loaded fine on my XP system, but the Vista system refuses to recognize the driver. No luck finding an updated driver on the web and I've tried both a direct USB port from the motherboard and through a hub, all ports 2.0...

Hi, I've been having software driver problems with my Dlink DWA-552 under Vista. When I booted my Windows 7 64-bit partition, Windows effortlessly installed the correct driver set and I have no problems. I looked into this magic a bit further and discovered that Windows 7 had installed two drivers for my DWA-552, both from system32/drivers: athrx.sys by Atheros and

My present motherboard has 2 internal SATA connections which I use for my C and D drives, I wish to add another one for a new DVD player, Question: Can this be accomplished by installing a special PCI card in a spare slot of my MB? What make do you recommend?

I regularly experience bluescreen events (once per day). The fault bucket is the same for all. Any help would be greatly appreciated. Thanks! Name Dell Wireless 1505 Draft 802.11n WLAN Mini-Card Adapter Type Ethernet 802.3 Product Type Dell Wireless 1505 Draft 802.11n WLAN Mini-Card Driver c:\windows\system32\drivers\bcmwl6.sys (4.170.77.3, 1.15 MB (1,207,288 bytes), 12/26/2008 6:15...

I just bought a brand new computer couple of weeks ago and today I noticed two stuck pixels on my brand new Samsung 2232GW screen!!! I know that in order to return it, it has to have 7 stuck pixels, so I gues I'm stuck with it.... The problem is that I tried massaging them, tapping and even hitting and shaking to no avail. I tried the softwares like UndeaPixels and JScreenfix but they don't work,...

Greetings I am using windows Vista and I recently tried to use by CD/DVD, after inserting a disc into the drive, it failed to read so I tried to open the drive from my computer but it just came up with the message “insert disk into drive” I then opened my device manger in the control panel and the CD/DVD drive has the yellow triangle with ! mark. I then double clicked the icon which took me to my...

I have a new Kodak printer and a new laptop but I cannot connect to the printer. When I search for it...it appears in my network but when I try to add it it says that it will not print to printer. I reloaded the software and it just sits there and searches for the printer. My wife has the *same new laptop* as I and hers will print so I know it is not the printer This is what the error...

Vista recognizes my device and I can browse the contents of my device. But it won't sync - When I try to sync it says "There is a problem with your connections. Please disconnect and reconnect your device and try again" I have done that many times in addition to reinstalling the Device Center and rebooting. my ipaq is "ancient" by today's standards - it's OS is Windows CE 4.2 but there is a...

Hello, I am using Vista 64 Home Premium with 8 gb ddr2 ram. I use an 8 gb flash drive formatted NTSF. The Readyboost cash is limitted to 4090 bytes. Why? Should I be able to use the full 8 gb? -- Joel

I just bought a Intel core 2 Quad processor - with Microsoft Vista Home Premium loaded on it - and keep getting this message in 'Performance Info and Tools -- advanced tools - VxD loader error what does this do? How do I fix it - I am strictly an amateur and did buy a 3 year Insurance plan so shouldn't this be covered under my policy thanks for any help Jean

My problem is that I can't access my Lacie 160 GIG drive(its been formatted NTSC). I've checked all my drivers which are up to date. Here's the weird part. I have this plugged into a 1394 cardbus and when I turn the drive on & check the "safely remove hardware" icon it shows the card & the lacie drive & the drive letter. However If I try to access the drive either at that location or in explorer...

Hello all, Well, I am having an interesting problem. I recently upgraded from 2GB of corsair xms memory to 4GB of Patriot Extreme Performance RAM. First off, I messed up by not changing the voltage to the proper level. At first I was running it at 1.9v (the manufacturer recommends 2.1-2.2). So, obviously I start getting weird problems, lots of crashing. I finally figure out the voltage is wrong...

my computer shut down auto with a note that the reason for that is to prevent it from crashing, please advice

Please review and help, my computer and for almost 3 times shut down with a note that the reason for this shut down is to prevent the computer from crashing due to an error!! please review and advice thank you Log Name: Application Source: Windows Error Reporting

Please review and help, my computer and for almost 3 times shut down with a note that the reason for this shut down is to prevent the computer from crashing due to an error!! please review and advice thank you Log Name: Application Source: Windows Error Reporting

could you please review and advice the error that I got in my computer, this happened almost 3 times, that the computer will shut down automatically to prevent crashing Log Name: Application Source: Windows Error Reporting Date: 1/22/2009 6:44:34 AM Event ID: 1001 Task Category: None Level: Information

:-) Your basic smilie. This smilie is used to inflect a sarcastic or joking statement since we can't hear voice inflection over Unix. ;-) Winky smilie. User just made a flirtatious and/or sarcastic remark. More of a "don't hit me for what I just said" smilie. :-( Frowning smilie. User did not like that last statement or is upset or depressed about something. :-I Indifferent smilie. Better than...

Hello Everyone, Recently, I get the "Code 10-This device cannot start" error when I insert my USB pen drive into the Windows Vista system. The same flash drive has no problem in windows XP. Anyone knows why? Thanks Morteza

have an ASUS G50VT notebook that is 3 weeks old and I am running Vista Home Premium 64bit for my OS. My ODD was working jsut fine, now I can not read anything. In Explorer I can see the drive, but it does not read anything. I have unistalled the drive several times and rebooted, but did not work, I have also tried to edit the registry, but lower filters and upper filters are not listed to delete....