|
|
|
|
1 |
596 |
|
|
|
|
4 |
569 |
|
|
This is Crazy ...Even for a Beta Prgm by
Jim McCree
Below is a list of the items that "currently" function perfectly with Vista
Beta 2 on my laptop that are / will not work if I "upgrade" to Vista
RC1........There is even a Microsoft product that wont work as well in the
list.....
a.. eTrust EZ Antivirus 7.1
b.. Intel PROSet/Wireless
c.. Nero ImageDrive
d.. Nero Vision 4
e.. QuickTime 6
|
September 9th 06 11:46 PM
by OpeXp
|
5 |
489 |
|
|
Failed Driver Install after GUI loads by
MDK
I stupidly installed Alcohol 120 percent in Vista and now every time Windows
loads, it automatically tries to install the incompatible driver and gives
me BSOD. I can't get into the registry to stop the installation process
quickly enough after my desktop comes up. Is there anything I can do to
stop this installation routine? Safe mode doesn't help here, either.
System restore was turned...
|
September 10th 06 12:31 AM
by MDK
|
2 |
429 |
|
|
Vista RC1 and ASUS P5W DH Deluxe by
ajy0903
Hello.
I have a question about Vista RC1 and ASUS P5W DH Deluxe.
I was trying to install the Vista RC1 to my new motherboard, ASUS P5W DH
Deluxe.
When i put dvd of RC1 and boot it up to install it.
When it boots into the part that the vista logo suppose to come out (of
course it doesn't have logo yet), at the bottom of it, where is the bar, it
got grayed out and it does nothing from that...
|
September 9th 06 09:19 PM
by ajy0903
|
0 |
451 |
|
|
Vista RC1 and ASUS P5W DH Deluxe by
ajy0903
Hello.
I have a question about Vista RC1 and ASUS P5W DH Deluxe.
I was trying to install the Vista RC1 to my new motherboard, ASUS P5W DH
Deluxe.
When i put dvd of RC1 and boot it up to install it.
When it boots into the part that the vista logo suppose to come out (of
course it doesn't have logo yet), at the bottom of it, where is the bar, it
got grayed out and it does nothing from that...
|
September 9th 06 09:26 PM
by ajy0903
|
0 |
412 |
|
|
vista don't recongize 4 gigs of system memory by
Simon D
Hi
I am have the same problem missing 1 Gb of memory
When I was running vista beta 2 32bit O/S, I could see all 4GB of memory,
upgrade to RC1 Build 5600 I am now only seeing 3GB of memory.
If I switch to vista RC1 64bit, I can see 4GB RAM on my system.
No problem with my Bios, all set as suggested the problems is in this new
|
September 9th 06 10:11 PM
by Simon D
|
0 |
408 |
|
|
32 bit verses 64 bit hardware or software by
greenarow1
Does anyone know if there is a comparison chart for 32 bit verses 64 bit
hardware for Vista? Or do I have to look at each one separately? Also, is
there a list of vendors that are supporting 64 bit Vista? I am in sort of a
bind because I work in the field of computer forensics and presently Vista 32
bit does not support or some of the functions do not work for some of my
forensics tools...
|
|
0 |
416 |
|
|
clp 500 driver for vista 64Bit by
jwardl
I need one too... USB for me.
The CLP-550 driver will make the printer heat up and cycle, but it won't
actually PRINT anything.
This is a Vista-killer for me if I can't get a driver. The CLP-500 may not
be s usper-expensive printer, but it was enough that I'm not willing to
abandon it. Besides -- I like the built-in duplexer.
A 32 bit Vista driver would do...
|
September 10th 06 01:38 AM
by jwardl
|
0 |
498 |
|
|
Working USB POTS modem? by
EricBergan
Has anyone found a USB POTS (as opposed to DSL) modem whose drivers work with
Vista? I've been trying to dig one out of US Robotics, but there Vista
strategy seems to be to hope Vista goes away. Thanks.
|
|
0 |
426 |
|
|
hardware work with vista rc1 by
ghislain
Amd atlon x2 3800+/asus motherboard A8nE/soundcard audigy2
platinum/graphiccard ATIpciexpress550x/2x512 ddr memory
stick/hpdesjet3420/benQlightscribedvd recorder/
dvd lg reader/multicard reader,memorystick compacflash ect..
|
|
0 |
435 |
|
|
Acer Tarvelmate 8104WLMi - filesystem corruption by
Michael
Hello,
I have a 5-months old Acer Tarvelmate 8104WLMi that's always been running
Windows XP flawlessly. But each time I try a new Vista release (Beta 1, Beta
2, Pre-RC1) the filesystem of the Vista NTFS partition gets corrupted after a
few hours of use.
Anybody knows of that kind of failure? Could it be driver-related?
DETAILS
|
|
1 |
473 |
|
|
way to manually edit what drivers startup calls? by
robertkoch
is there a way to manually tell vista to load the USB drivers during boot-up?
I think the issue is just that since im not deep enough into the OS (at
initial setup for first boot) the drivers just havent been called. any
suggestions?
|
|
3 |
391 |
|
|
CanonScan Drivers by
Louis
Hello,
I desparetly need a vista 64 bit driver for my canon 8400F.
I can not find it, and are afraid: "using vista = no scanner".
Does any one have a driver?
|
|
2 |
446 |
|
|
Linking to remote printer does not work by
Louis
Hello,
I have a canon i865-printer normaly connected to my w2k file/printer server.
When trying to install that printer under vista 64 bit, that is to be
reported impossible do to no compatible driver.
However when connecting the printer locally, vista identifies the printer,
and installs
drivers, No problem :
|
September 9th 06 12:49 PM
by Louis
|
2 |
478 |
|
|
Motherboard constantly beeps while running Vista Beta 2/RC-1 by
ChrisN
Hi, I'm not sure if this is the correct place to ask this, but here goes...I
have been running Vista Beta 2 with no problems until recently I upgraded my
motherboard (From a Gigabyte GA-K8U S754 to an Asus K8N nForce 3 250 S754) so
everytime I run Vista Beta 2 the motherboard constantly "beeps" (a constant
"beep beep beep etc"), the beeping starts at the boot loading screen and
stops when I...
|
|
6 |
434 |
|
|
Vista RC1 does not catch my Nvidia 6200le by
Aakash
Just got vista RC1 but its not recognising my graphic card. On same computer
i have Xp which runs it with no problem. Vista is not able to start the PCI
standard PCI-to-PCI brigde on which i have my graphic card. This problem was
with Beta 2 too. I dont know what to do now its just too bad display i get
now in vista.
i have 1GB RAM with pentium 4 -3.06ghz my vram is...
|
|
1 |
458 |
|
|
USB Support in Upgrade vs. Clean Insall by
robertkoch
Just wanted to share my experience- When upgrading from XPSp2 to RC1 when I
got to the first boot and initial configuration screens I got NO response
from any USB ports, meaning I had no input. Luckily I was able to salvage my
files through other means and format and do a clean install.. after the clean
install everything works great! might be something you want to check into....
|
|
0 |
473 |
|
|
RC1 reinstalls drivers after first reboot (Dell Inspiron 9300) by
Dirk Steiger
Hi everyone!
I'm having trouble with RC1 (5600) of Vista. I'm running the OS on a Dell
Inspiron 9300 (Pentium M 1,73 Ghz, 2 GB RAM, Nvidia Geforce 6800 Go 256 MB).
After the installation process everything works fine - the graphics, the
WLAN. When I connect to my home WLAN the first time, Vista updates
automatically with new drivers for the Intel 2200B/G-WLAN-Hardware and the
Sigmatel...
|
|
1 |
460 |
|
|
Radeon Xpress 200 Blue Screen RC1 by
Luke Ewing
I installed Windows Vista Beta 2 when it came out, and it worked very very
well with my Radeon Xpress 200 in my Compaq computer (Aero and everything).
Then, when I updated Vista to RC1, whenever I boot Vista, I get a blue
screen. I then tried a clean install, and same thing happened.
Before, with Beta 2, I used the Radeon Xpress 200 driver, and disabled (e.g.
didn't use) my PCI card, a Radeon...
|
|
0 |
437 |