|
|
Ide controller not supported by
JewelsH
I know that Intel is no longer supporting the 850MD but the D101GGC is still
being supported and that gives the same message about the ide controller when
I try to install. I need someone to point me in the direction to find a
solution please. Not sure this forum will yield answers. Will search for
more tech minded forums.
Thanks.
"Jane C" wrote:
|
August 30th 06 08:35 PM
by Brian
|
1 |
735 |
|
|
Hello all! by
Phillip Schlueter
I am in a constant reboot sequence with vista build 5536. I have booted from
the DVD and selected repair to no avail. Vista Beta 2 was working well, so
I'm not sure what the problem is. It may be simple, where do I start. The
install went well up until I stated "Starting Windows Vista for the first
time". I got the copyright banner then the moving green bar the logo on the
bottom right...
|
|
0 |
610 |
|
|
Version 5536 by
JCO
I have Vista 32, Ver. 5536 and want to know if it will upgrade my current
Vista32 5384.
|
|
1 |
601 |
|
|
Vista Installation on Virtual Server 2005 R2 by
Markus Klein
Hi,
any ideas how to setup Vista Build 5536 on Virtual Server 2005 R2? I am
getting an error just after the PID Input telling me that install.wim is
inaccessible.
Thanks
Markus
|
|
0 |
553 |
|
|
Anti-Virus One Fix anyways by
Andre
Hello All,
Here is what I found out.........today.
1. IF you have any anti-virus on the Beta 2, Unstall it.
I had McAfee 8.0i installed with Beta 2. (per thier instuctions)
and it crashed on the final leg of UPdating to the Pre-RC1
"Finalizing Installation", it then reverted back to the Beta release.
2. When I Insatlled a new copy of the PRe-RC1 in renamed the Beta
|
August 30th 06 07:28 PM
by JackM
|
2 |
559 |
|
|
Missing IE7 after install by
scouser_steve
Hi,
I had a few teething problems installing Vista but eventually got it sorted
thanks to the newsgroups and a bit messing about (namely resetting my PC just
after the updates had been applied in the setup - got the error about setup
could not continue and would roll back the changes)
Any-hoo.... once in Vista Beta 2 I don't have IE7 - I have the icon but
nothing else. There are a few other...
|
August 30th 06 07:19 PM
by JackM
|
1 |
568 |
|
|
Can't Download Pre-RC1 by
HellsChicken
I can get the Akami download manager to run just fin, and I hit save as with
the name of the file, but it thinks the file size is 906 bytes. I've tried
downloading it several times now and every single time, it's 906 bytes. Has
anyone else experienced this?
|
August 30th 06 07:13 PM
by JackM
|
1 |
573 |
|
|
Dual Boot Installation Questions by
Jason Saffer
Hi all,
I am currently downloading Vista and plan to burn it onto a CD and then,
hopefully, install it onto a separate partition. Some questions:
1. When I boot the computer from the CD, will Vista automatically give me
the option to set up a dual boot, if I am leaving XP on the C drive?
2. What new files are installed onto the C drive when I set up a dual boot
system?
|
|
2 |
546 |
|
|
How to dual boot Windows Vista Beta 2 and Windows XP by
Martin Healy
Andy,
My aplologies for the late reply but I was away from my PC for a few days
but many thanks for replying. I must agree with your comments made on dual
booting with reference to: "If you make the new primary partition active, you
won't get dual
booting". There is a good chance that if I made the Vista primary
partition active, the computer would boot every time to Vista and I wouldn't...
|
|
2 |
605 |
|
|
Product key for vista RC1 by
Leonard
I've downloaded the RC1 ISO image and burn it to the DVD. But I cannot
install RC1 as it require the product key and my product key for beta 2 is no
longer valid. How can I get it? Thanks.
|
|
0 |
542 |
|
|
|
|
1 |
556 |
|
|
Downloading Pre-RC1 by
tomremy
Downloading went fine, but i cant find the ISO find it in my
dokuments folder ?
|
August 30th 06 01:42 PM
by Peter
|
4 |
529 |
|
|
Succesful install & setup!!! by
WildPointer
I cannot get past the Launcher. I get to "Downloading _aunchpad.exe" and the
status bar quits moving and the program dies. I have turned off the firewall
and I cannot run it.
Any suggestions to get EQ2 to actually run under Vista? This is build 5536.
It used to work before I did a fresh install with this Pre-RC1 build HELP!
"dfeifer" wrote:
Had about the same experience as well, once I...
|
|
0 |
505 |
|
|
Vista Kiosk user policy by
Mike Carlisle
Hi,
I'm trying to write an installer for a Vista kiosk application, and wonder
if someone can help me with the issue of applying a user policy to the
lockdown user account during installation.
These are the issues I'm facing:
1) Unable to use a run once to apply the policy due to Vista ACL which
requires elevation in order to write to the policy reg keys.
|
|
0 |
545 |
|
|
Vista Kiosk apply user policy by
Mike Carlisle
Hi,
I'm trying to write an installer for a Vista kiosk application, and wonder
if someone can help me with the issue of applying a user policy to the
lockdown user account during installation.
These are the issues I'm facing:
1) Unable to use a run once to apply the policy due to Vista ACL which
requires elevation in order to write to the policy reg keys.
|
|
0 |
541 |
|
|
Upgrade fails from 5472 to 5536 - Toshiba Tecra M3 by
Wendell Ying
Get error message:
Windows cannot be installed on this computer with the current system BIOS
version. Contact your computer manufacturer for a BIOS update, install the
update, and then start Windows installation again. OEM Name: TOSHIBA; OEM
Model: TECRA M3; BIOS Version: v1.40 ; BIOS Date: 20051115000000.000000+000
Workaround is to install clean from DVD and then it works.
--
Wendell Ying
|
|
0 |
542 |
|
|
dual boot with XP syntax error in boot loader device name for {ntldr} by
ThymeJ
On one of the PCs I installed 5536 on, the boot loader had a bug/syntax
problem for the 'Windows Legacy OS Loader' identifier of {ntldr}. The device
value was not set:
Windows Legacy OS Loader
------------------------
identifier {ntldr}
device unknown
path \ntldr
description Earlier Version of Windows
|
August 30th 06 08:19 AM
by ThymeJ
|
0 |
535 |
|
|
Can't Install Vista 5536 on Asus P5B Deluxe Wifi Board by
Brian Lewis
I'm unable to get Vista to install on this motherboard, this is the newest
latest and greatest Core 2 Intel P965 Chipset motherboard and it has a
JMicron JMB363 PATA/SATA Controller that handles the PATA connector used by
the cdrom drives.
If I boot from the Vista media (5536/5472/5384) it detects the ICH8R
controller handling the hard drives but it gives an error stating it doesn't
have...
|
August 30th 06 08:10 AM
by ThymeJ
|
3 |
562 |
|
|
Installing Pre-RC1 without PID? by
JCGeoGuy
I guess I am late to the beta-testing. Didn't quite make the CPP and now I
downloaded the pre-RC1 without a PID. Can I still install my download?
|
August 30th 06 04:03 AM
by Paula
|
2 |
496 |
|
|
Uninstall procedure by
NoNoBadDog!
Greetings! I installed the 32 bit version of Windows Vista Public Preview
Beta as part of a dual boot with Windows XP. Windows XP Pro SP2 is on the
boot drive, and the 32 bit version of Vista is on a second HDD.
After installing Vista, the computer boots using the "Windows Boot Manager"
interface installed be Vista, this interface offers me the choice of
"Microsoft Windows" (this is...
|
|
0 |
568 |