|
|
0X0000005C eeeerrrrrrr this makes my head hurt,help. by
del69
Hi all,
I hope someone can help me or point me in the right direction.
When i try to install vista from disc i get an (ERROR)
the error is STOP:(0X0000005C) 0X0000010B 0X00000003 0X00000000 0X00000000
|
|
5 |
138 |
|
|
0X0000007B by
MAXMN98
When RC1 reboots I get this error message. I'm not running any raid arrays
and the raid controller is disabled in the BIOS. I have an ASUS A8V Deluxe,
AMD 3700+, 1 GB, 2 HD (200 & 160), DVDRW and CDRW. I've installed the lates
VIA raid controllers but it didn't work. Any ideas as to what could be a next
step.
--
MBN
|
October 6th 06 08:14 PM
by Theo
|
2 |
223 |
|
|
0X0000007B by
DjGuana
I'm trying to install Vista RC1, I have downloaded the iso file and
burned a DVD. I'm installing using Windows XP (C partition, 148GB from a
raid 2*78GB WD). The installation goes well until the first reboot. Then I
get the following message:
A problem has been detected and windows has been shut down to prevent
damage to your computer. If this is the first time you've seen this stop...
|
|
3 |
159 |
|
|
0x0000007b after installation by
Patrick
Installation goes fine but presents STOP 0x0000007B when it reboots to finish
it.
This is a clean install with a completely formatted 25 GB partition.
I have updated the BIOS to the latest version (1.D) and get the same problem
after reformating and reinstalling.
I have run a CHKDSK /R on the installation drive and it found no errors.
I have removed all non-essential peripherals as well as...
|
|
3 |
194 |
|
|
0x0000007B BSOD after first reboot Vista RTM by
Frank P.
Hello guys,
I'm trying to install Windows Vista RTM on my computer. But I get a BSOD
after the first reboot and safe mode won't work either. I noticed this
problem quite a lot at these groups but I decided to start a new topic
because I couldn't find my exact problem with my specs in here.
I'm trying to install Vista 32 bit on a Samsung SP2504C SATA2 disk on a
ASROCK 939DUal-SATA2...
|
February 4th 07 09:23 AM
by lukep
|
7 |
171 |
|
|
0X0000007B Stop Error by
DjGuana
I'm trying to install Vista RC1, I have downloaded the iso file and
burned a DVD. I'm installing using Windows XP (C partition, 148GB from a
raid 2*78GB WD). The installation goes well until the first reboot. Then I
get the following message:
A problem has been detected and windows has been shut down to prevent
damage to your computer. If this is the first time you've seen this stop...
|
|
1 |
143 |
|
|
0x000000EA - Can't complete Install by
ADAM
I have been having this message now during the Pre-RC1 and now the RC1
releases keeping me from finishing my setup to Vista. During the Pre-RC1 I
was using a partition on my main drive that had Win XP on it and I planned to
dual boot. Tried reinstalling several times with no luck everytime the same
error, tried the instal from within XP and also by booting from the CD. Now
with the release...
|
|
2 |
557 |
|
|
0x000000EA - Can't complete setup by
ADAM
I have been having this message now during the Pre-RC1 and now the RC1
releases keeping me from finishing my setup to Vista. During the Pre-RC1 I
was using a partition on my main drive that had Win XP on it and I planned to
dual boot. Tried reinstalling several times with no luck everytime the same
error, tried the instal from within XP and also by booting from the CD. Now
with the release...
|
September 7th 06 10:12 PM
by ADAM
|
0 |
476 |
|
|
0x0000116 BSOD - Vista Install, Final Stages by
Ray Frangie
Hi All,
I'm getting a 0x0000116 BSOD in nvlddmkm.sys in the middle of the
"Completing Installation" phase of Windows Vista Ultimate install.
This is the x86 RTM Copy off Technet.
The following is the setup of this machine:
1 x AMD Athlon 64+ 3400 Single Core CPU
|
|
1 |
134 |
|
|
0x07b error solved=) by
Silentblade®
The solution was:i stopped it in a friends pc(same model/motherboard)
and I discovered it was a stupid pci hardware that vista had seen as a
HD! xD im soooooo happy now!;)
--
Silentblade®
|
|
0 |
178 |
|
|
0x80040702 Failed to load DLL:ISUtil by
MidlandsBlonde
Hey Im wondering if anyone can help
I have a Vista laptop and I tried to install PC studio 3 from the samsung
fun club place and it doesnt work just says its removing but Im trying to
install and when I go to unistall it I get this msg
error number 0x80040702 Failed to load DLL:ISUtil
So I cant uninstall it to try to reinstall it
Can anyone Help
thank you!
|
|
1 |
151 |
|
|
0x8007000B immediatly after Install Now by
Robb
I give up. Immediatly after "Install Now" I receive a "Windows was unable to
create a required installation folder" message, Error code 0x8007000B. I am
attempting this on a T60P with Sonic DLA, Power Management Driver, Lenovo
Rescue and Discovery un-installed per the Lenovo site. I also disable McAfee
Virus protection. I have no idea on what directory it thinks that it cannot
create.
I...
|
|
1 |
179 |
|
|
0x80070017 during install by
MSDN
Hi,
I know this has been asked many times - but I still havn't found a solution
that works!
I downloaded Vista (en_windows_vista_x86_dvd_X12-34293.iso ) from the MSDN
subscriber area.
I checked the SHA1 value and the downloaded file matches the one listed.
|
November 30th 06 09:36 AM
by MSDN
|
8 |
325 |
|
|
0x80070241 by
Budskie
That's just one error, I also get status 0xc0000098 critical system driver
missing; Program c:\windows.~BT\sources\setup.exe.
Then \$windows.~BT\windows\system32\drivers\sacdrv.sys
I lost the Beta 2 CPP install which had finally gotten to work pretty good,
now I can't reinstall it or clean install Pre-RC1. Ant help would be
appreciated. I'm pretty sure that my download and ISO burn were both...
|
|
0 |
680 |
|
|
0x80070570 error by
JT50
I am trying upgrade from win XP Pro to Vista Ultimate with no luck. I am
running a Asus board, with Athlon processor, 2 Gig mem, IDE drive. I install
all XP without any errors, yes it activated, and have tried patched and
unpatched versions with the same results. During the upgrade I recieve a
error 0x80070570 system does not upgrade, resulting in a boot-loop. I just
bought the OS, it is...
|
August 13th 08 09:32 PM
by JT50
|
0 |
185 |
|
|
0x800705B4 turns into 0x80072f8f???? by
Allan
I tried the fix Tony Krijnen posted for 0x800705B4, and now I am getting this
message when it tries to activate. Activation failed, and now it gives me
the following...
Code:0x80072f8f
Description: Unable to find detailed error description
The Facility Code is win 32(0x07)
Facility Error: 0x2f8f(12175L)
|
|
1 |
418 |
|
|
0x80072f8f became 0x800705B4 by
Allan
I used Tony Krijnen's fix for the 5B4, and it turned into the 0x80072f8f.
I also get a facility code of win32(oxo7)
and a facility error of ox2f8f(12175L)
I should have 10 licenses availible to me, but it just will not activate. I
tried to do it be phone, but that failed after it read me the activation key.
It had to accept my product key to produce act key, but pc still had error...
I...
|
September 7th 06 05:26 PM
by Allan
|
0 |
420 |
|
|
0x800F081F error Vista SP1 RC upgrade on Ultimate by
Wendell Ying
I received an error code 0x800F081F "An internal error occurred when
installing the service pack". Any clues? I had been testing SP1 Beta prior to
this but have successfully de-installed prior to attempting RC upgrade.
--
Wendell Ying
|
|
1 |
156 |
|
|
0x800f0900 with SP2 install by
JCLSB
The morning of 7-8 my laptop was shutdown, when I booted up Windows informed
my that updates had been installed. When I started using the computer I
noticed certain programs did not work and I could not access certain
programs. I tried to research the problem. Checked for malware using MS
online OneCare and tried to reinstall IE8. Upon reboot the system would not
start so I attempted a...
|
July 16th 09 04:16 PM
by JCLSB
|
0 |
163 |
|
|
0XC000000E \WINDOWS\SYSTEM32\WINLOAD.EXE by
serpienteazteca
I INSTALLED WINDOWS VISTA LIKE 3 DAYS AGO IT WAS RUNNING OK THEN I DID A
RESTART AND I GOT THIS MESSAGE
WINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE
CAUSE
FILE: \WINDOWS\SYSTEM32\WINLOAD.EXE
STATUS: 0XC000000E
INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
IS MISSING OR CORRUPT
BELOW I GOT THE OPTION ENTER TO CONTINUE ESC TO EXIT
I TYPE ENTER...
|
|
2 |
339 |