|
|
drivers for an HP Scanjet 2200c scanner by
Necromonger
Anyone have any idea how to get this working? DO I just have to wait for HP
to release vista drivers? Any chance I could trick it into using the XP
drivers for the scanner??
|
October 18th 06 06:08 PM
by Robert
|
2 |
589 |
|
|
MS printer team. Please read this by
Jerry P
I am getting close. I am trying to use a Canon MP500 printer/scanner.
Using the software that came with the unit. On XP and all the beta releases
of Vista I had no problems.
Until RC-1. Using RC-1, I get a error the scanner drivers are not installed.
Just by accident I found in Vista a program called Windows Photo gallery.
This program has a import from camera/scanner so I tried it, and the...
|
October 21st 06 11:51 PM
by Jerry P
|
6 |
622 |
|
|
|
October 20th 06 01:16 AM
by Jerry P
|
0 |
611 |
|
|
Will Lexmark X73 work with Vista RC 1? by
astro999
Trying to hook up my Lexmark X73 with the computer that has Windows Vista RC
1.Dell 3.2ghz, I got it to scan but it doesnt communicate with the
printer.Thats what it says all the time.Problem comminicating with
printer.Going to start over uninstall and re-install it,maybe it'll work.
My other computer with the Brother MFC-3240c works fine.
--
Thank you
astro999
|
|
0 |
838 |
|
|
Lexmark Question by
Will
Does anyone know if the lexmark SE 3455 is supported in vista build 5744 ?
|
|
1 |
547 |
|
|
Anyone have a HP spc2110xi working in Vista??? by
skon
I've tried everything. I installed the latest XP drivers from HP for the psc
2110xi and it does not work. Tried 8 or 10 'simular' drivers in Vista's list
of HP drivers with no success.
I am running: Vista RC1 Build 5600 32-bit
On a: Pentium D CPU 2.80GHz, 2GB RAM, Seagate 200GB HD (C:) IDE, Western
Digital 160GB HD (E:) IDE, Memorex 8x DVDR etc.
Any suggestions would be much appreciated.
|
October 23rd 06 04:15 AM
by skon
|
0 |
471 |
|
|
|
|
0 |
1,199 |
|
|
installing a network scanner device (HP officejet 7410) in rc2 574 by
km
Hi!
been looking around but did not trace a solution...
Installed the a.m. device smoothly as a network printer, going through the
'add new printer routine', hence vista recognized the device properly. now as
the device has also scanning capabilities I certainly would like to be able
to use it as such, however the scanner installation routine seems to be
somewhat different, at least there...
|
October 24th 06 10:57 AM
by km
|
0 |
571 |
|
|
Dataproducts LZR1580 by
Mark Hartt-Palmer
I know the above printer is old, but I've used its A3 facility a lot in the
past. This printer has XP and XP64 drivers listed, but Dataproducts does not
even appear as a manufacturer on the Vista Add Printer list. Does anyone
know what emulation this printer is, and know of a suitable driver I can use
to get it working?
Many thanks!
|
|
1 |
576 |
|
|
Can't add network printers by
Robert Aldwinckle
(cross-post added to Vista P,F,&S)
"BarryL" wrote in message
...
Thank You, Thank You. I have worked with this problem for a week or at least
20 hours and your post got my network printer going. Why Microsoft did not
address this problem is a mystery to me because I have seen this problem in
several...
|
|
0 |
636 |
|
|
Error adding oemui sample printer in Vista RC1 by
Michael Harvey
Hi, I am getting the following error report when adding the OEM UI
Customization Sample (Unidrv) printer. I compiled OEMUI.dll using WDK RC1
with Vista x86 free build enviroment, and left all the files where they are
in the sample directories, trying to install from the oemui.inf file. I am
logged in as an administrator so I expect an unsigned driver should not be a
problem for me, yet it...
|
|
2 |
755 |
|
|
Lexmark Z 707 problem by
Will Schuitman
I have installed the software for my lexmark Z707 photo printer
this was done in compatibility mode for Win XP sp2 The installation went
very well with no errors and the software works just fine
However I have no communications through the usb port why is this ??
FYI the printer is connected directly to the PC not through a hub
Does anybody else have this problem
|
October 19th 06 09:28 PM
by Lloyd
|
1 |
619 |
|
|
Can Not Add Network Printer by
Edward
When I try to add a network printer from another Vista (build 5744) computer,
I come across two errors. The first and foremost popular error is "Windows
cannot to the printer. There is not enough memory to complete this operation.
Please close some programs and try again." This should not be a problem
because both systems that I have tried to do this on have a gig of memory.
This error...
|
October 19th 06 04:38 AM
by Edward
|
3 |
703 |
|
|
Importing Fax Files from XP Backups by
Mills Architect
I have used the fax function in Windows XP for years. I routinely backup the
sent and received files. I would like to import these backed up files into
Vista Fax but cannot figure out where they should be copied. It appears it
should be c:\ProgramData\Microsoft\WindowsNT\MSFax\Inbox or SentItems. I
have copied my old file to these folders, but they are not visible in Vista
Fax.
What am I...
( 1 2)
|
|
12 |
943 |
|
|
RC2 cannot locate a network printer by
Al
1. I am running as the local admin on a 32 bit RC2 box. (I can't get
profiles to roam properly so I'm running on local accounts:-((((
2. I am connected to the network and to the domain which is hosted by a pair
of Enterprise 2003 servers.
3. Add printer hangs / errors out Explorer when I try to find a network
printer.
Suggestions please.
|
October 22nd 06 02:45 AM
by PaulB
|
1 |
566 |
|
|
|
|
2 |
602 |
|
|
XP can't find printer on Vista by
Jeff
I've searched but have not found a solution.
I have Vista x86 installed on a desktop with a printer (Samsung ML-1210)
attached and working.
I am trying to configure my wife's laptop running XP Home, but when I try
adding the printer from the Vista machine XP doesn't recognize ANY printer on
Vista.
Any ideas?
|
October 22nd 06 06:17 PM
by Jeff
|
7 |
603 |
|
|
Lexmark Z515 by
Sir Myles
I have the above printer and am trying to use it on RC1. It uses the Lexmark
510 driver to run. I initially had problems installing the driver, but
finally was able to do so. When I plug in the printer via the USB cable,
Windows recongnizes it. The printer shows up in the Printer section of
control panel as well. However, when I try to print a test page, I get a
communication error saying...
|
October 19th 06 09:25 PM
by Lloyd
|
1 |
666 |
|
|
Print Server issues in MS Vista by
qtasi
I am unable to connect to a Linksys 3 port print server using MS Vista RC1. I
have Windows XP home, Windows XP Pro and Windows 2000 Pro on other machines
that have no problem. I installed the print server driver and the
administration program on the machine with MS Vista. Linksys Print Server
shows up as a port but I am not allowed to configure the port. If I try to
add a new Print Server...
( 1 2)
|
October 22nd 06 05:45 PM
by qtasi
|
10 |
921 |
|
|
Anyone had luck with Lexmark X1150 ? by
jancawa55
no, the Lex 1150 failed to work for me, either direct or on home network, so
I bought the HPF335 which worked fine.
"Peter" wrote:
The question says it all. It seems that some makes work with the XP drivers
and others don't.
In the case of this one it installs without any problem but can't
communicate.
I tried disabling UAP .. no luck.
|
|
0 |
545 |