I heard, there will be changes to Bitlocker in SP1. Will these be only in
the GUI or will the boot-code change, too, so that there is hope that it
will work with my hardware?



""Ken Zhao [MSFT]"" schrieb im Newsbeitrag
...
Yes, I agree with your opinion.

Thanks & Regards,

Ken Zhao

Microsoft Online Support
Microsoft Global Technical Support Center

Get Secure! - www.microsoft.com/security
http://www.microsoft.com/security
================================================== ==
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
================================================== ==
This posting is provided "AS IS" with no warranties, and confers no
rights.




--------------------
| From: "mister.jones"
| References:


| In-Reply-To:
| Subject: Bitlocker black screen after reboot
| Date: Thu, 13 Sep 2007 23:35:02 +0200
| Lines: 87
| Message-ID:
| MIME-Version: 1.0
| Content-Type: text/plain;
| format=flowed;
| charset="iso-8859-1";
| reply-type=original
| Content-Transfer-Encoding: 7bit
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Windows Mail 6.0.6000.16480
| X-MimeOLE: Produced By Microsoft MimeOLE V6.0.6000.16480
| X-MS-CommunityGroup-PostID: {125E1260-E67B-4555-8EA9-12FCA41EAF57}
| X-MS-CommunityGroup-ThreadID: D2469DE6-055C-43FE-956D-7D6D72C01011
| X-MS-CommunityGroup-ParentID: CACA94FA-3ECE-4665-873E-C48085D925CD
| Newsgroups: microsoft.public.windows.vista.security
| Path: TK2MSFTNGHUB02.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.vista.security:9105
| NNTP-Posting-Host: TK2MSFTNGHUB02.phx.gbl 127.0.0.1
| X-Tomcat-NG: microsoft.public.windows.vista.security
|
| Thanks Ken, for coming back to this issue. I looked at the document on
| Bitlocker you pointed me to. Most of it is about TPM requirements.
However,
| I want to run Bitlocker without TPM, which is possible when this feature
is
| activated in Group Policy.
| I suppose rather that Bitlocker is not finding the right harddisk.
Because
| there are three controllers and six disks, I suppose the Bitlocker's
| bootcode gets confused. What startles me is that it does not even give
out
| an error message.
| Best regards
| mister.jones
|
|
|
| ----- Original Message -----
| From: ""Ken Zhao [MSFT]""
| Newsgroups: microsoft.public.windows.vista.security
| Sent: Tuesday, September 11, 2007 12:37 PM
| Subject: Bitlocker black screen after reboot
|
|
| Hi Jones,
|
| I am just writing to see how everything is going. If you have any
updates
| or need any further assistance on this issue, please feel free to let
me
| know.
|
| Thanks & Regards,
|
| Ken Zhao
| |
| | Hello Jones,
| |
| | Thank you for using newsgroup!
| |
| | Based on your symptom, I suspect this similar issue may be caused by
the
| | incompatible BIOS or hardware environment. For more detailed
| requirements
| | for BitLocker, please refer to:
| | Windows Vista BitLocker Client Platform Requirements
| |
|
http://download.microsoft.com/downlo...0-8a0a-b183365
| | 65f5b/BitLockerReq.doc
| |
| | Thanks & Regards,
| |
| | Ken Zhao
| |
| | |
| | | Hello!
| | | I have a problem with Bitlocker: after the first restart (system
check
| | | before encryption) the screen stays black. No error message, no
boot
| | screen,
| | | nothing.
| | | This is what I did:
| | | 1. Allow Bitlocker without TPM (via gpedit.msc)
| | | 2. Use Bitlocker Drive Preparation Tool to create a new partition.
| | | 3. Use the Bitlocker control panel to configure encryption.
| | | 4. Reboot when reuired to do so for the system check.
| | | Result: Black screen after BIOS POST screens. No message at all.
| | | Ctrl-Alt-Del does work, nothing else.
| | |
| | | The only way to repair was to boot from the Windows DVD and do a
| startup
| | | repair.
| | |
| | | My configuration is as follows:
| | | - ABit AB9Pro board (latest BIOS) with the following onboard
| controllers:
| | | . Intel ICH8R (2 RAID arrays containing boot-volume, 2 non-RAID
| disks)
| | | . JMicron JMB363 in AHCI mode (1 HD SATA, 1 HD PATA, 1 CD-ROM
PATA)
| | | . Silicon Image 3132 (1 CD-ROM SATA)
| | |
| | | Is there anything I am doing wrong here? Anyone got Bitlocker
running
| | with a
| | | similar configuration?
| | |
| | | Thanks,
| | | mister.jones
| | |
| | |
| | |
| | |
| |
| |
|
|
|